Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
DXLink HDMI Single-mode Duplex Fiber Receiver
Model: DXF-RX-SMD
Part #: FG1010-560
- Only One Cable – Send audio and video, while passing power over one twisted pair cable
- Multi-Format Analog Port and HDMI Port – Supports legacy analog signals - RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, DisplayPort++ and DVI signals
- Send HDMI signals up to 100 meters – Extend the reach of the HDMI signals far beyond the capabilities of typical HDMI cabling
- Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
- Easy Installation – Mounts in standard decor style wallplates
Product Info
Tech Specs
Documents
OVERVIEW
The DXLink HDMI Fiber Receiver features built-in SmartScale® Technology to deliver HDMI with HDCP that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control and Ethernet over single mode fiber from up to 10 Km. Mount the low-profile DXLink Fiber Receiver behind a display or above a ceiling mounted projector and control it using the built in RS-232 or IR ports. Plus monitor the connected display's settings, and send IR control signals to the Enova DGX Digital Media Switcher with integrated NetLinx® control back to the source device.
COMMON APPLICATIONS
The ideal solution for any destination display or projector designed into an Enova DGX integrated system that requires the distance capabilities and inherent security of fiber – or both; including campus-wide distribution of sources that are shared between classrooms, secure military applications, casinos, arenas and museums. Directly connect LCDs, plasmas and projectors using the HDMI output connection while delivering room audio via the stereo audio output.
- Only One Cable – Send audio and video, while passing power over one twisted pair cable
- Multi-Format Analog Port and HDMI Port – Supports legacy analog signals - RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, DisplayPort++ and DVI signals
- Send HDMI signals up to 100 meters – Extend the reach of the HDMI signals far beyond the capabilities of typical HDMI cabling
- Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable, see the Cabling for Success with DXLink white paper for more details
- Easy Installation – Mounts in standard decor style wallplates
- Power over DXLink
- Enabled – Designed for use with Enova DGX or DVX systems with DXLink inputs, or PS-POE-AT-TC (FG423-84) or PDXL-2 (FG1090-170) to provide remotely located Power over DXLink (requires firmware v1.2.40 or above)
- DXLink Direct Connection – When receiving Power over DXLink from the PS-POE-AT-TC or PDXL-2, DXLink Wallplates can be connected directly to a DXLink Receiver for a point-to-point solution
- Power Remotely - Power over DXLink is carried over twisted pair to simplify installation when used with the Enova DGX, Enova DVX, PS-POE-AT-TC or PDXL-2
- 3D Support - Pass through latest video formats including 3D and Deep Color
- Surround Sound Support - Pass through high definition surround sound including Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS and 2-channel through 8-channel L-PCM at 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
- HDCP Compliant
- DEALER BENEFITS
- HDMI/HDCP With Simplicity of Analog - Hassle-free plug-and-play operation eliminates the need for time-consuming cumbersome work-around tools to deal with HDCP key constraints and resolution incompatibilities
- Installation Friendly - Standard two gang size and remote powering capabilities allows the wallplate to be installed in virtually any location
- Complements Any Environment - Decor Wallplate is available in black or white and blends well in both commercial and residential applications
- CUSTOMER BENEFITS
- Interruption-Free Content - Exclusive InstaGate Pro® Technology allows audio and video to be switched quickly and easily to every connected display without the difficulties typically associated with HDCP
- Easily Connect Guest Devices - Provides a versatile solution for environments where sources are consistently changing
- Fiber Optic Connector Type - LC-LC
- Fiber Optic Signals Supported - Audio
- Fiber Optic Signals Supported - DVI
- Fiber Optic Signals Supported - HDMI
- Fiber Optic Signals Supported - RS-232
- ROHS Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Operating Distance (Multimode): 32808.40 ft
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 20 Watt
- Current Draw: 0.80 Amps
- Depth: 5.25 in
- Height: 1 in
- Width: 8.75 in
- Product Weight: 1.10 lbs
- Shipping Weight: 2.20 lbs
- Regulatory Compliance: HDCP, WEEE
- Certifications: CE, FCC, UL
- Signal to Noise Ratio: 93 dB
- Warranty (Length/Type): 3 Years Limited
- Power:
- Power Connector: 2.1 mm DC Power Jack
- Power Supply:
External, Included: Each HDMI RX ships with a desktop power supply with power cord, 2.5 A @ 12 V, Max 13.5 V - Environmental:
- Temperature (Storage): 22° F to 158° F (-30° C to 70° C)
- Humidity (Operating): 5% to 85% RH (non-condensing)
- Humidity (Storage): 0% to 90% RH (non-condensing)
- Heat Dissipation (On): 69 BTU/hr
- Ethernet:
Ethernet Connection: (1) RJ-45, TCP/IP Port (ICS LAN 10/100) - DXLINK FIBER:
- Fiber Connector: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A)
- Fiber Cable Type: 9/125µm
- Fiber Cable Length: 10 km (6.21 miles)
- Transport Layer Throughput: 10.3125 Gbps
- Fiber Transceiver Type: 10G SFP+
- Optical Wavelength: 1310 nm
- Optical Budget:
- 7.4 dB (typ), 5.1 dB (stressed) between DXLink Fiber Transceivers
- 7.4 dB (typ) between DXLink Fiber Transceivers
- Optical Modulation Amplitude (OMA): -5.2 dBm (min)
- Optical Modulation Amplitude (OMA) Sensitivity: -12.6 dBm (typ), -10.3 dBm (stressed)
- Optical Modulation Amplitude (OMA) Sensitivity: -12.6 dBm (typ)
- Optical Transceiver Mean: -8.2dBm to 0.5dBm (avg pwr)
- HDMI:
- Output Connector: (1) HDMI Type A Female
- Compatible Formats: HDMI, HDCP , DVI
- Signal Type Support:
- HDMI
- DVI-D (single link with HDMI cable adapter)
- Local Loopback Output Connector: (1) HDMI Type A Female Local Loopback Output, +5 V DDC Pin Output 55 mA, non-scaling
- Progressive Resolution Support:
- All progressive resolutions between 480p and 1920 x 1200 @ 60 Hz via automatic SmartScale query of the display's preferred DID Detailed Timing Definition
- Interlaced Resolution Support:
- 480i, 576i, 1080i
- Including but not limited to those resolutions shown in the "Instruction Manual - DXLink Fiber Transmitters and Receivers"
- Interlace video supported into the Transmitter, progressive only supported out of the Receiver unless in non-scaling Bypass
- Output Scaling: SmartScale or Manual Configuration or Bypass
- 3D Format Support:
- Yes, if Scaler on RX is set to Bypass mode
- Frame Packing 1080p 24Hz
- Frame Packing 720p 50/60Hz
- Frame Packing 1080i 50/60Hz
- Top-Bottom 1080p 24Hz
- Top-Bottom 720p 50/60Hz
- Side-by-Side Half 1080i 50/60Hz
- Deep Color Support:
- 24-bit, 30-bit, 36-bit
- 30-bit and 36-bit supported when the HDMI DXLink RX Scaler is in Bypass mode and format is 1080p60 or less
- 24-bit, 30-bit
- 30-bit supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
- Color Space Support:
- RGB 4:4:4
- YCbCr 4:4:4 and 4:2:2
- Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
- HDCP Support:
- Yes
- Supports AMX HDCP InstaGate Pro Technology When used with an Enova DGX Digital Media Switcher the key support is up to 16 sinks per output, independent of source device
- CEC Support: None
- Propagation Delay (Typical): 26 ms when scaling, 5.2 us when in Bypass mode
- CDR (Re-Clocking): Yes
- Output Voltage (Nominal): 1.0 Vpp Differential
- Output Rise Time / Fall Time: 425 ps typ (20% - 80%)
- Video Data Rate (Max):
- 4.95 Gbps / 6.75 Gbps
- 6.75 Gbps supported if Scaler on corresponding output board or DXLink Fiber RX is set to Bypass mode and format is 1080p60 or less
- 4.95 Gbps / 5.568 Gbps
- 5.568 Gbps supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
- Video Pixel Clock (Max):
- 165 MHz / 225 MHz
- 225 MHz supported if Scaler on corresponding output board or DXLink Fiber RX is set to Bypass mode and format is 1080p60 or less
- 165 MHz / 185.625 MHz
- 185.625 MHz supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
- Audio Format Support:
- Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM
- Dolby Digital and DTS support up to 48kHz, 5.1 channels
- Audio Resolution: 16 bit to 24 bit
- Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
- Local Audio Support: Extraction
- ANALOG AUDIO:
- Output Connections: 3.5mm Mini-Stereo Jack
- Output Signal Types: Stereo Analog
- Output Level (Max): 0 dBU, unbalanced, >= 2 kOhm load
- Output Frequency Response: <+0 dB to -0.5 dB, 50 Hz to 20 kHz
- Audio THD+N: <0.04%, 1 kHz, -10dBu to +2 dBu
- Audio S/N Ratio: >93 dB, 20 Hz to 20 kHz Vin=+2dBu
- Digital to Analog Reference Level: 0 dBfs = +0 dBu
- Audio Synchronization: Video formats @ 60Hz frame rate: video formats @ 60Hz frame rate: In scaling mode audio leads video by 12ms typ (4ms to 20ms). In Bypass mode, audio lags video by 14ms
- USB (HID) KEYBOARD & MOUSE:
- USB (HID):
- (1) USB Mini A/B Connector ("DEVICE")
- Connect a keyboard & mouse and send commands to a PC connected to a DXLink Twisted Pair or Fiber TX
- For a list of HID devices which have been tested and found to be working well with the latest firmware
- Controls:
- ID Pushbutton
- Toggle between DHCP and static IP addressing
- Places system in NetLinx Device ID assignment mode
- Reset the factory default settings
- Restore the factory firmware image
- Advanced Configuration Interface: (1) USB Mini-B Connector ("PROGRAM")
- Serial:
- (1) 3.5mm Pluggable Phoenix Terminal Block
- Bidirectional RS-232 Standard NetLinx Baudrate 1200-115k
- Parity support Odd/Even/None
- IR RX: (1) 3.5mm Mini-Stereo Jack Port for IR03 Receiver (Optional)
- IR TX: (1) 3.5mm Pluggable Phoenix Terminal Block Port for IR01 Emitter (Optional)
- Indicators:
- Power Indicator: (1) LED that lights:
- Green during normal operation state
- Red when power is applied and boot sequence is started
- Yellow when system initialization is in process
- Digital Video Indicator: (1) Green LED indicates the presence of video signals through the module
- Audio Indicator: (1) Green LED indicates the presence of digital audio signals through the module
- Scaling Button and LEDs: (1) Pushbutton and (3) Green LEDs; use Scaling button to select one of the three options: Bypass, Auto (SmartScale), or Manual. The factory default is Auto (SmartScale). If the RX power cycles, it defaults to the last persisted mode (achieved by pressing scaling button and holding it until the desired scaling mode LED flashes)
- IR TX Indicator: (1) Red LED lights during the transmission of IR data via the rear IR port
- IR RX Indicator: (1) Yellow LED lights during the receipt of IR data via the rear IR port
- RS-232 TX Indicator: (1) Red LED shows serial transmit (TX) data activity
- RS-232 RX Indicator: (1) Yellow LED shows serial receive (RX) data activity
- LINK/ACT: (1) Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
- Status: (1) Green LED lights when the Controller is programmed and communicating properly
- CEC Indicator: Not currently supported
- USB Indicator: (1) Yellow LED lights when either a Keyboard or mouse is connected directly to the RX, or either and/or both are connected to a USB Hub connected to the RX ID Pushbutton: Places system in NetLinx Device ID assignment mode
- Front Connectors:
Advanced Configuration Interface: (1) USB Mini-B Connector ("PROGRAM") - Back Connectors:
- Local Power: 2.1 mm DC Power Jack
- DXLink Fiber Input: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A)
- ICS LAN/Ethernet Port: (1) RJ-45 Connector, TCP/IP Port (ICS LAN 10/100) Serial:
- (1) 3.5mm Pluggable Phoenix Terminal Block
- Bidirectional RS-232 Standard NetLinx Baudrate 1200-115k
- Parity support Odd/Even/None IR RX
- IR RX: (1) 3.5mm Mini-Stereo Jack Port for IR03 Receiver (Optional)
- IR TX: (1) 3.5mm Pluggable Phoenix Terminal Block Port for IR01 Emitter (Optional)
- USB (HID) Keyboard & Mouse:
- (1) USB Mini A/B Connector
- Connect a keyboard & mouse and send commands to a PC connected to a DXLink Twisted Pair or Fiber
- HDMI Output: HDMI Type A Female
- Analog Stereo Output: 3.5mm Mini-Stereo Jack
- General:
- MTBF: 124,232 hours
- Noise Level: 0 dBA @ 1m (typ), 45.3 dBA @ 1m (max)
- Airflow: Convection (openings on top of case, typ), forced air (out of front plate, when fan is active)
- Mounting Options:
- Compatible V Style mounting options:
- AVB-VSTYLE-RMK-FILL-1U, V Style Module Rack Mounting Tray /w Fill Plates, 5 1/4" Depth (FG1010-721)
- AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting Tray, 5 1/4" Depth (FG1010-720)
- AVB-VSTYLE-SURFACE-MNT, V Style Single Module Surface Mount Brackets (FG1010-722)
- AVB-VSTYLE-POLE-MNT, V Style Single Module Pole Mounting Kit (FG1010-723)
- Safety Certification:
- Class 1 Eye safe per requirements of IEC 60825-1 / CDRH
- Included Accessories:
- Ships with a desktop power supply with power cord
- Optional Accessories:
- AVB-VSTYLE-RMK-FILL-1U, V Style Module Rack Mounting Tray /w Fill Plates, 5 1/4" Depth (FG1010-721)
- AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting Tray, 5 1/4" Depth (FG1010-720)
- AVB-VSTYLE-SURFACE-MNT, V Style Single Module Surface Mount Brackets (FG1010-722)
- AVB-VSTYLE-POLE-MNT, V Style Single Module Pole Mounting Kit (FG1010-723)
- CC-NIRC, NetLinx IR Emitter Cable (FG10-000-11)
- IR03, External IR Receiver Module (FG-IR03)
- CC-MINIUSB, Mini USB to PC Cable Adapter (FG5967-20)
- Compatible AMX Products:
- Enova DGX 8/16/32/64 Digital Media Switchers with DGX-O-DXF-SMD, Enova DGX DXLink Single Mode Fiber Output Board, Duplex (FG1058-630) installed
Cabling for Success with DXLink
996 kb
- Other
Fiber Receiver
839 kb
- Other
Fiber Receiver
3958 kb
- Other
Fiber Receiver
378 kb
- Data Sheet
Fiber Receiver
199 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
AMX
Model: DXF-RX-SMD
Request more information from a dealer near you
close
Request more information from a dealer near you