Fiber Optic Systems : Fiber Optic Receivers & Transmitters : AMX - DXF-TX-MMS

DXLink Multi-format Multimode Simplex Fiber Transmitter

Model: DXF-TX-MMS

Part #: FG1010-363

HDCP Compliance Over Fiber – Transmit HDCP compliant video including HDMI up to 300 m
Industry Leading Data Rate – DXLink is leading the way with an optical transport rate of 10 Gbps
SmartScale® Technology
Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup
This prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

OVERVIEW

The DXLink Multi-Format Fiber Transmitter sends analog and digital audio and video signals including HDMI with HDCP up to 300 meters over multimode fiber. Use the DXLink Fiber Transmitter in conjunction with the Enova DGX 8, 16, 32 or 64 to transmit clear, uncompressed video at the fastest data rate in the industry – 10 Gbps.

COMMON APPLICATIONS

The ideal entry-point for any source designed into an Enova DGX integrated system that requires the distance capabilities and inherent security of fiber – or both; including campus-wide distribution of sources that are shared between classrooms, secure military applications, casinos, arenas and museums. Directly connect video sources such as PCs using the HD-15 multi-format input connection or HDMI input and easily include audio on the same fiber cable by using the stereo or digital audio connection.

HDCP Compliance Over Fiber – Transmit HDCP compliant video including HDMI up to 300 m
Industry Leading Data Rate – DXLink is leading the way with an optical transport rate of 10 Gbps
SmartScale® Technology
- Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup
- This prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system
Secure and Isolated – Fiber inherently provides extra security and electrical isolation making it the transport method of choice for many mission-critical secure environments
Native NetLinx® Control Everywhere – Control connected source devices using the built-in IR and RS-232 ports
Field Serviceable Fiber Modules – Easily remove and replace SFP modules in the field
Ethernet Connectivity – Provides ICSLan Ethernet support at the Receiver - add Ethernet connectivity to a Touch Panel, plug in a WAP or stream IP audio/video to a Ethernet enabled source device
IR Receiver – Send IR commands back to the Enova DGX to control source equipment using an IR remote

Fiber Optic Connector Type - LC-LC
Fiber Optic Signals Supported - Audio
Fiber Optic Signals Supported - DVI
Fiber Optic Signals Supported - HD Component Video
Fiber Optic Signals Supported - HDMI
Fiber Optic Signals Supported - RGB
Fiber Optic Signals Supported - RGBHV
Fiber Optic Signals Supported - RS-232
Warranty - Yes
Spec Sheet available - Yes

AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 20 Watt
Current Draw: 0.80 Amps
Depth: 5.25 in
Height: 1 in
Width: 8.75 in
Product Weight: 1.10 lbs
Shipping Weight: 2.20 lbs
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Operating Distance (Multimode): 984.25 ft
Certifications: CE, FCC, UL
Regulatory Compliance: HDCP, WEEE
Signal to Noise Ratio: 93 dB
Warranty (Length/Type): 3 Years Limited
MTBF::
- 124,232 hours
ACTIVE POWER REQUIREMENTS::
- Power Consumption (Max): 20 W
- Power Connector: 2.1 mm DC Power Jack
Power Supply::
- External, Included:
Environmental:
- Temperature (Storage): -22° to 158° F (-30° to 70° C)
- Humidity (Operating): 5% to 85% RH (non-condensing)
- Humidity (Storage): 0% to 90% RH (non-condensing)
- Thermal Dissipation (Max): 69 BTU/hr
Ethernet:
- Ethernet Connection: (1) RJ-45, TCP/IP Port (ICS LAN 10/100)
- Note: Simplex DXLink solutions do not support an Ethernet transport layer on the simplex fiber path, therefore an Ethernet connection is required to provide IR/RS-232/USB Keyboard/Mouse or NetLinx program control to this device
USB (HID) KEYBOARD & MOUSE:
- USB (HID): (1) USB Mini A/B Connector ("HOST"); connect a DXLink Fiber TX to a PC and emulate keyboard and mouse commands from a DXLink Fiber Receiver
- For a list of HID devices which have been tested and found to be working well with the latest firmware
- See Duplex models for bidirectional control over fiber. Simplex models do not support control transport over Fiber (such as Ethernet, USB, IR, Serial Control or EDID); although when used as part of a complete Enova DGX solution, control can be provided if a supplemental independent network connection is used. See the "Instruction Manual – Enova DGX Digital Media Switchers" for details.
Controls:
- ICS LAN/Ethernet Port: (1) RJ-45, TCP/IP Port (ICS LAN 10/100), Note: Simplex DXLink solutions do not support an Ethernet transport layer on the simplex fiber path, therefore an Ethernet connection is required to provide IR/RS-232/USB Keyboard/Mouse or NetLinx program control to this device
- ID Pushbutton:
- Advanced Configuration Interface: (1) USB Mini-B Connector ("PROGRAM"):
Indicators:
- Power Indicator: (1) Green LED indicates whether or not the DXLF-MFTX-MM-D is powered on
- Digital Video Indicator: (1) Green LED indicates the presence of video signals through the module
- Audio Indicator: (1) Green LED indicates the presence of digital audio signals through the module
- Analog Video Indicator: (3) Green LEDs, 1 lights to indicate the presence of the type of analog video through the Multi-Format TX (composite, Y/c; Y/Pb/Pr or RGB; RGBHV or RGBS)
- IR TX Indicator: (1) Red LED lights during the transmission of IR data via the rear IR port
- IR RX Indicator: (1) Yellow LED lights during the receipt of IR data via the rear IR port
- RS-232 TX Indicator: (1) Red LED shows serial transmit (TX) data activity
- RS-232 RX Indicator: (1) Yellow LED shows serial receive (RX) data activity
- LINK/ACT: (1) Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
- Status: (1) Green LED lights when the Controller is programmed and communicating properly
- CEC Indicator: Not currently supported
- USB Indicator: (1) Yellow LED lights when host device is connected
DXLINK FIBER:
- Fiber Connector:
- Fiber Cable Type: 50/125µm
- Fiber Cable Length: 300 m (984 ft)
- Transport Layer Throughput: 10.3125 Gbps
- Fiber Transceiver Type: 10G SFP+
- Optical Wavelength: 850 nm
- Multimode Optical Budget:
- Multimode Optical Transceiver Mean Output Power: -1 dBm (avg pwr)
HDMI:
- Input Connector: (1) HDMI Type A Female
- Compatible Formats: HDMI, HDCP , DVI
- Signal Type Support:
- Local Loopback Output Connector: (1) HDMI Type A Female Local Loopback Output, +5 V DDC Pin Output: 55 mA, non-scaling (Single Link With Cable Adapter)
- Local Loopback Output +5V DDC Pin Output: 55 mA
- Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz (including but not limited to those resolutions shown in the "Instruction Manual - DXLink Fiber Transmitters and Receivers")
- Interlaced Resolution Support:
- 2K Resolution Support:
- 3D Format Support:
- Deep Color Support:
- Color Space Support:
- HDCP Support:
- CEC Support: None
- DDC/EDID Support:
- Propagation Delay (Typical): 4.8 us
- Input Voltage (Nominal): 1.0 Vpp Differential
- Input Re-clocking (CDR): Yes
- Input Equalization: Yes, Adaptive
- Video Data Rate (Max):
- Video Pixel Clock (Max):
- Audio Format Support:
- Audio Resolution: 16 bit to 24 bit
- Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
- Local Audio Support: Insertion
Analog Video:
- Input Connector: (1) HD-15, breakout cable required for RGB formats
- Compatible Formats: RGBHV, RGBs, RGsB, YPbPr (HDTV), Y/c (S-Video), C (Composite)
- Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz including but not limited to those resolutions shown in the "Instruction Manual - DXLink Fiber Transmitters and Receivers"
- Interlaced Resolution Support:
- Auto-Adjust Input: Supported
- RGB Input Signal Level Range: 1 Vpp nominal
- RGB Input Impedance: 75ohms
- HV Sync Input Signal Level Range: 2 to 5 Vpp
- HV Sync Input Impedance: 2.5 pF Typ, 10 pF Max
- Digital Processing: 24 bit, 165 MHz
- Y/Pb/Pr Input Signal Level Range: 1.0 Vpp for Y, 700 mVpp for Pb Pr
- Y/Pb/Pr Input Impedance: 75ohms
- Y/c (S-Video) Input Signal Level Range: 1.0 Vpp for Y, 1.0 Vpp for c
- Y/c (S-Video) Input Impedance: 75ohms
- C (Composite) Input Signal Level Range: 1.0 Vpp
- C (Composite) Input Impedance: 75ohms
S/PDIF DIGITAL AUDIO:
- Input Connector: (1) RCA Jack, video signal must be present to pass audio
- Input Signal Types: S/PDIF, video signal must be present to pass audio
- S/PDIF Audio Format Support:
- S/PDIF Resolution: 16 to 24 bit
- S/PDIF Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
- S/PDIF Input Signal Level Range: 200 mVpp to 600 mVpp terminated
- S/PDIF Input Impedance: 75ohms
- Analog to Digital Reference Level: +2.5 dBu = 0 dBfs
ANALOG AUDIO:
- Input Connector: (1) 3.5mm mini-stereo jack, video must be present to pass audio
- Input Signal Types: Stereo analog, video must be present to pass audio
- Analog Input Level (Max): +2.5 dBu, unbalanced
- Analog Input Impedance: 10kohms
- Analog to Digital Conversion: 48 kHz Sample Rate, 24-bit
- Analog to Digital Reference Level: +2.5 dBu = 0 dBfs
Front Connectors:
- Advanced Configuration Interface: (1) USB Mini-B Connector ("PROGRAM")
- Local Loopback Output Connector: (1) HDMI Type A Female, non-scaling ("LOCAL OUT")
Back Connectors:
- Video Input: (1) HD-15 (RGBHV, RGBs, RGsB, Y/Pb/Pr, Y/c / S-Video, composite (breakout cable is required for RGB formats)
- HDMI Input: (1) HDMI Type A Female
- Analog Stereo Input: (1) 3.5mm Mini-Stereo Jack
- S/PDIF Digital Audio Input: (1) RCA Jack
- ICS LAN/Ethernet Port: (1) RJ-45 Connector, TCP/IP Port (ICS LAN 10/100)
- Serial: (1)
- IR RX:
- IR TX:
- USB (HID) Keyboard & Mouse: (1) USB Mini A/B Connector ("HOST"); connect a DXLink Fiber TX to a PC and emulate keyboard and mouse commands from a DXLink Fiber Receiver
- DXLink Fiber Output: (1) LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A)
- Local Power: 2.1 mm DC Power Jack
General:
- Noise Level: @ dBA @ 1m (typ), 45.3 dBA @ 1m (max)
- Airflow: Convection (openings on top of case), forced air (out of front plate, when fan is active)
- Mounting Options: Compatible V Style mounting options:
Safety Certification:
- Class 1 Eye safe per requirements of IEC 60825-1 / CDRH
Included Accessories:
- Ships with a desktop power supply with power cord
OPTIONAL ACCESSORIES:
- AVB-VSTYLE-RMK-FILL-1U, V Style Module Rack Mounting Tray with Fill Plates (FG1010-721)
- AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting Tray (FG1010-720)
- AVB-VSTYLE-SURFACE-MNT, V Style Single Module Surface Mount Brackets (FG1010-722)
- AVB-VSTYLE-POLE-MNT, V Style Single Module Pole Mounting Kit (FG1010-723)
- CC-NIRC, NetLinx IR Emitter Cable (FG10-000-11)
- IR03, External IR Receiver Module (FG-IR03)
- CC-USB, USB Programming Cable (FG10-5965)
Compatible AMX Products:
- Enova DGX 8/16/32/64 Digital Media Switchers with DGX-I-DXF-MMS, Enova DGX DXLink Mutimode Fiber Input Board, Simplex (FG1058-623) or DGX-I-DXF-MMD Enova DGX DXLink Multimode Fiber Input Board, Duplex (FG1058-622) installed
- Direct point-to-point connection with DXF-RX-MMS, DXLink HDMI Multimode Fiber Receiver, Simplex (FG1010-563) or DXF-RX-MMD, DXLink HDMI Multimode Fiber Receiver, Duplex (FG1010-562)
- Enova DGX 8/16/32/64 Digital Media Switchers with Multimode Fiber Input Board installed including DGX-I-DXF-MMS (FG1058-623) and DGX-I-DXF-MMD (FG1058-622)
- Direct point-to-point connection with a Multimode Fiber Receiver including DXF-RX-MMS (FG1010-563) or DXF-RX-MMD (FG1010-562)

Wallplate Transmitter 475 kb - Other

Project List

Fiber Transmitter 561 kb - Data Sheet

Project List

Fiber Transmitter 671 kb - Other

Project List

Fiber Transmitter 3878 kb - Other

Project List

Suggested Products

Digital Media 8G Fiber Transmitter 401

by Crestron Electronics, Inc.

HDMI Over Fiber Receiver

by Crestron Electronics, Inc.

HDMI Over Fiber Transmitter

by Crestron Electronics, Inc.