Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
160 MHz Rail-to-Rail Amplifier with Disable
Model: AD8041
- Fully specified for +3 V, +5 V and
- +/-5 V Supplies
- Output Swings Rail to Rail
- Input Voltage Range Extends 200 mV
- Below Ground
Product Info
Tech Specs
Documents
The AD8041 is a low power voltage feedback, high speed amplifier designed to operate on +3 V, +5 V or +/- 5 V supplies. It has true single supply capability with an input voltage range extending 200 mV below the negative rail and within 1 V of the positive rail. The output voltage swing extends to within 50 mV of each rail, providing the maximum output dynamic range. Additionally, it features gain flatness of 0.1 dB to 30 MHz while offering differential gain and phase error of 0.03% and 0.03° on a single 5 V supply. This makes the AD8041 ideal for professional video electronics such as cameras, video switchers or any high speed portable equipment. The AD8041's low distortion and fast settling make it ideal for buffering high speed A-to-D converters. The AD8041 has a high speed disable feature useful for multiplexing or for reducing power consumption (1.5 mA). The disable logic interface is compatible with CMOS or open-collector logic. The AD8041 offers low power supply current of 5.8 mA maximum and can run on a single 3 V power supply. These features are ideally suited for portable and battery powered applications where size and power are critical. The wide bandwidth of 160 MHz along with 160 V/ microsecond of slew rate on a single 5 V supply make the AD8041 useful in many general purpose high speed applications where dual power supplies of up to +/-6 V and single supplies from 3 V to 12 V are needed. The AD8041 is available in 8-lead PDIP and SOIC over the industrial temperature range of -40°C to +85°C.
- Fully specified for +3 V, +5 V and
- +/-5 V Supplies
- Output Swings Rail to Rail
- Input Voltage Range Extends 200 mV
- Below Ground
- No Phase Reversal with Inputs 1 V
- Beyond Supplies
- Disable/Power-Down Capability
- Low Power of 5.2 mA (26 mW on 5 V)
- High Speed and Fast Settling on 5 V:
- 160 MHz -3 dB Bandwidth (G = +2)
- 160 V/ microsecond Slew Rate
- 30 ns Settling Time to 0.1%
- Good Video Specifications
- (RL = 150 Ohm , G = +2)
- Gain Flatness of 0.1 dB to 30 MHz
- 0.03% Differential Gain Error
- 0.03° Differential Phase Error
- Low Distortion
- -69 dBc Worst Harmonic @ 10 MHz
- Outstanding Load Drive Capability
- Drives 50 mA 0.5 V from Supply Rails
- Cap Load Drive of 45 pF
- Amplifier Signal Type - Video
- Amplifier Type - Other
- Spec Sheet available - Yes
- Small Signal Bandwidth: 170 MHz
- Slew Rate: 170 V/micro second
- THD (-dB): 72 dB
- Input Voltage Noise: 16 nV/rtHz
- Min Stable Gain: 1 V/V
- V Span Min: 3 V
- V Span Max: 12 V
- Supply Current: 6.5 mA
- Package: DIP,SOIC
- Iq/Amp: 6.5 mA
- Operating Temperature (Maximum): 185 F
- Operating Temperature (Minimum): -40 F
- Current Draw: 0.01 Amps
160 MHz Rail-to-Rail Amplifier with Disable
245 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Analog Devices, Inc.
Model: AD8041
Request more information from a dealer near you
close
Request more information from a dealer near you