Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Low Cost, High Speed Rail-to-Rail Amplifier (Dual)
Model: AD8092
- Low cost single (AD8091) and dual (AD8092) amplifiers
- Fully specified at +3 V, +5 V, and +/-5 V supplies
- Single-supply operation
- Output swings to within 25 mV of either rail
- High speed and fast settling on 5 V
Product Info
Tech Specs
Documents
Low cost, voltage feedback, high speed amplifiers designed to operate on +3 V, +5 V, or +/- 5 V supplies. This have true single-supply capability, with an input voltage range extending 200 mV below the negative rail and within 1 V of the positive rail. Despite their low cost, they provide excellent overall performance and versatility. The output voltage swing extends to within 25 mV of each rail, providing the maximum output dynamic range with excellent overdrive recovery. This makes useful for video electronics, such as cameras, video switchers, or any high speed portable equipment. Low distortion and fast settling make them ideal for active filter applications. This offer a low power supply current and can operate on a single 3 V power supply. These features are ideally suited for portable and battery-powered applications where size and power are critical. The wide bandwidth and fast slew rate make these amplifiers useful in many general-purpose, high speed applications where dual power supplies of up to +/- 6 V and single supplies from +3 V to +12 V are needed.
- Low cost single (AD8091) and dual (AD8092) amplifiers
- Fully specified at +3 V, +5 V, and +/-5 V supplies
- Single-supply operation
- Output swings to within 25 mV of either rail
- High speed and fast settling on 5 V
- 110 MHz, -3 dB bandwidth (G = +1)
- 145 V/micro s slew rate
- 50 ns settling time to 0.1%
- Good video specifications (G = +2)
- Gain flatness of 0.1 dB to 20 MHz; RL = 150 Ohm
- 0.03% differential gain error; RL = 1 kOhm
- 0.03%differential phase error; RL = 1 kOhm
- Low distortion
- -80 dBc total harmonic @ 1 MHz; RL = 100 Ohm
- Outstanding load drive capability
- Drives 45 mA, 0.5 V from supply rails
- Drives 50 pF capacitive load (G = +1)
- Low power of 4.4 mA per amplifier
- Amplifier Signal Type - Video
- Amplifier Type - Other
- Spec Sheet available - Yes
- Small Signal Bandwidth: 110 MHz
- Slew Rate: 170 V/micro second
- THD (-dB): 71 dB
- Input Voltage Noise: 16 nV/rtHz
- Min Stable Gain: 1 V/V
- V Span Min: 3 V
- V Span Max: 12 V
- Supply Current: 11 mA
- Package: SOIC,SOP
- Iq/Amp: 5.5 mA
- Current Draw: 0.01 Amps
- Operating Temperature (Maximum): 185 F
- Operating Temperature (Minimum): -40 F
Low Cost, High Speed Rail-to-Rail Amplifiers
709 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Analog Devices, Inc.
Model: AD8092
Request more information from a dealer near you
close
Request more information from a dealer near you