Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
11.3Gbps 12 × 12 Digital Crosspoint Switch
Model: ADN4612
- DC to 11.3 Gbps per port, NRZ data rate
- Multitime constant, programmable receive equalization
- 6-tap programmable transmit feedforward equalization (FFE)
- 150mW per channel at 2.5V (outputs enabled)
- 12 × 12, fully differential, nonblocking array
Product Info
Tech Specs
Documents
The ADN4612 is a 12 × 12 asynchronous, protocol agnostic, digital crosspoint switch with 12 differential PECL-/CML-compatible inputs and 12 differential CML outputs.
The ADN4612 is optimized for nonreturn-to-zero (NRZ) signaling with data rates of up to 11.3 Gbps per port. Each port provides programmable input equalization, loss of signal (LOS) detection, programmable output swing, and output preemphasis/deemphasis.
The ADN4612 nonblocking switch core implements a 12 × 12 crossbar and supports independent channel switching through the serial control interface. The ADN4612 has low latency and very low channel-to-channel skew.
The ADN4612 is packaged in an 88-lead LFCSP package and operates from -40°C to +85°C.
The ADN4612 is optimized for nonreturn-to-zero (NRZ) signaling with data rates of up to 11.3 Gbps per port. Each port provides programmable input equalization, loss of signal (LOS) detection, programmable output swing, and output preemphasis/deemphasis.
The ADN4612 nonblocking switch core implements a 12 × 12 crossbar and supports independent channel switching through the serial control interface. The ADN4612 has low latency and very low channel-to-channel skew.
The ADN4612 is packaged in an 88-lead LFCSP package and operates from -40°C to +85°C.
- DC to 11.3 Gbps per port, NRZ data rate
- Multitime constant, programmable receive equalization
- 6-tap programmable transmit feedforward equalization (FFE)
- 150mW per channel at 2.5V (outputs enabled)
- 12 × 12, fully differential, nonblocking array
- Double rank connection programming
- 2-pin selectable connection maps
- Per lane lost of signal (LOS) detection
- Flexible output termination supply range (1.8V to 3.3V)
- DC- or ac-coupled differential CML inputs and outputs
- Programmable CML output levels
- Load from EEPROM for automatic power-on ready operation
- Per lane input and output P/N pair inversion for routing ease
- 50ohms on-chip input/output termination
- Supports 64-bit/66-bit, scrambled or not coded NRZ data up to 11.3 Gbps
- Serial (I2C or SPI slave) control interface
- 88-lead LFCSP, 12mm × 12mm, Pb-free package
- -40°C to +85°C operating temperature range
- Applications:
- Fiber optic network switching
- 10 Gigabit Ethernet over backplane 10GBASE-KR 802.3ap
- XLAUI/CAUI (802.3ba)
- SONET OC-192/STM-64x
- 1×, 2×, 4×, 8×, and 10× Fibre Channel
- Switcher Type - Other
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 185 F
- Operating Temperature (Minimum): -40 F
- Number of Inputs: 12
- Number of Outputs: 12
Digital Crosspoint Switch
2505 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Analog Devices, Inc.
Model: ADN4612
Request more information from a dealer near you
close
Request more information from a dealer near you