Power Distribution : Power Distribution Equipment : APC by Schneider Electric - AP8931

Rack PDU 2G, Switched, ZeroU, 15A, 100-120V, (8) 5-15

Model: AP8931

100/120V nominal input voltage
100/120V nominal output voltage
10ft (3.05m) cord length
NEMA 5-15P input connection
(8) NEMA 5-15R output connection

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.. Includes: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable

100/120V nominal input voltage
100/120V nominal output voltage
10ft (3.05m) cord length
NEMA 5-15P input connection
(8) NEMA 5-15R output connection
Vertical mounting capabilities: easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures.
Network Management Capabilities
- Full-featured network management interfaces that provide standards-based management via Web, SNMP and Telnet
- Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time
- Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements
Remote Individual Outlet Control: remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Alarm Thresholds
- Define alarm thresholds in order to avoid overloaded circuits
- Network and visual alarms inform the user of possible problems (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)
Local Current Monitoring Display
- The aggregate current draw per rack PDU is displayed on the unit via a digital display
- The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip (available on designated SKUs only)
Power Delays
- Allows users to configure the sequence in which power is turned on or off for each outlet
- This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads
- Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly
Load indicator LED: indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.
Flash Upgradeable
- Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert
- An IT-ready, scalable access monitoring system that collects, organizes and distributes critical alerts, surveillance video and key information
- Providing a unified view of complex physical infrastructure environments from anywhere on the network
Agility features
- Rackmountable: includes horizontal, vertical and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
- Single input power source: supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
- Wide range of input and output connections
  - Product family includes a variety of input and output connections to distribute 120V, 208V or 230V power to multiple outlets.
  - Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.
Includes
- Installation guide
- Rack mounting brackets
- Safety guide
- Serial configuration cable

UL Rated - Yes
Warranty - Yes
ROHS Compliant - Yes

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 23 F
Cord Length (in/mm): 120 in
Certifications: FCC, UL
Number of Outlets: 8
AC Voltage (Maximum): 120 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 15 Amps
Depth: 1.82 in
Height: 38.90 in
Shipping Depth (with packaging): 4.26 in
Shipping Height (with packaging): 44.53 in
Shipping Width (with packaging): 6.30 in
Width: 2.18 in
Net Weight: 9.15 lbs
Shipping Weight: 11.04 lbs
Regulatory Compliance: cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL Listed
Color: Black
Warranty (Length/Type): 2 years repair or replace
Nominal Output Voltage: 100V, 120V
Output Connections: (8) NEMA 5-15R
Nominal Input Voltage: 100V, 120V
Input Frequency: 50/60 Hz
Regulatory Derated Input Current North America: 12A
Input Connections: NEMA 5-15P
Maximum Input Current per phase: 15A
Operating Relative Humidity: 5 - 95%
Operating Elevation: 0-3000 meters
Storage Temperature: -25 - 65°C
Storage Relative Humidity: 5 - 95%
Storage Elevation: 0-15000 meters
Reach: Contains No SVHCs
Load Capacity: 1440 VA
Number of Power Cords: 1
Battery Directive: Compliant
Battery Notes: Contains Lithium Coin Cell
Acceptable Input Voltage: 100-120 VAC

PDU 320 kb - Other

Project List

Suggested Products

Digitalinx HDMI AV Distribution with Display Power Control

by Liberty AV Solutions