HDBaseT Receiver Work with AC-MX88-HDBT and AC-MX44-HDBT Matrix Switchers

Model: AC-EX70-444-RNE-SEA

HDMI 2.0(a/b)
18Gbps Bandwidth Support (Using ICT)
Slim Design to hide behind display
Up to 4K60 4:4:4 Support
Full HDR Support (HDR 10 and 12 Bit)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The AC-EX70-444-RNE is a revolutionary 4K60 4:4:4, HDR and 18Gbps supported HDBaseT Receiver built to work with the AVPro Edge HDBaseT Matrix Switchers.

This HDBaseT Receiver is the perfect companion to AVPro Edge's HDBaseT matrix switchers. Its slim design and rich features make this small unit the perfect solution for HDR Distribution. Using standard category you can distribute a 18Gbps signal up to 70 meters. Utilizing ICT (Invisible Compression Technology) we have achieved what was thought to be impossible. We can deliver a virtually lossless high bandwidth 4K HDR signal with support for all signals up to 18Gbps. Deep Color and HDR Metadata remain intact making the transmission free of artifacts like banding. Other similar devices will deliver a sub-par image that has very visible banding and color shifting.

HDMI 2.0(a/b)
18Gbps Bandwidth Support (Using ICT)
Slim Design to hide behind display
Up to 4K60 4:4:4 Support
Full HDR Support (HDR 10 and 12 Bit)
HDR, HDR10+ and HLG Support
EDID Management and EDID emulate
HDCP 2.2 (and all earlier versions supported)
CEC Pass Through
3D Support
Application:
Point to point HDMI extension – flat panel in BR# 1 to STB in basement – makes for a very clean install.
As an add-on to any matrix switch up to 18G for long distance zone coverage.
To carry the control signals (IR/RS232) for third party control integration for turning components on and off and switching channels, etc.
For retrofit jobs where there is category cable already run and re-engineering is not an option.
Cascade for ultra long distances
Includes:
AC-EX70-444-RNE (Receiver)
1 x IR Tx Unit
1 x IR Rx Unit
2x 3 Pin Terminal blocks for Audio and RS232 Ports
Mounting Ears

HDBaseT - Yes
Receiver/Transmitter Format Type - HDMI
Supported Resolution - 4K (4096x2400)
Spec Sheet available - Yes

Operating Temperature (Maximum): 123.80 F
Operating Temperature (Minimum): 23 F
Transmission Range: 330 ft
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 9 Watt
Current Draw: 0.50 Amps
DC Voltage: 48 Volts
Depth: 3.94 in
Height: 0.69 in
Shipping Depth (with packaging): 5.38 in
Shipping Height (with packaging): 1.75 in
Shipping Width (with packaging): 7.62 in
Width: 5.19 in
Product Weight: 0.50 lbs
Shipping Weight: 1 lbs
Video Resolutions: Up to 4K 60Hz 4:4:4
VESA Resolutions: Up to DCI 4K (4096x2160)
HDR formats/Resolutions: 420, 422, 444 (10 and 12 Deep Color) HDR10, HDR10+, HLG
Color Space: YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500)
Chroma Subsampeling: 4:4:4, 4:2:2, 4:2:0 Supported
Deep Color: Up to 16 bit (1080), Up to 12 bit (4K)
Audio Formats Supported HDMI: PCM 2.0 Ch, LPCM 5.1 and 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTSHD Master Audio, DTS-X, Dolby Atmos
Audio Formats Supported: Extracted (2CH Port) PCM 2 CH (No Downmix)
HDBaseT (CAT) Distance: (4K) 70M (230 ft)
HDMI Lead Out (up to 4K60 4:4:4): Up to 50 ft (using Bullet Train HDMI)
HDMI Lead Out (w/ AOC Cable) (up to 4K60 4:4:4): Up to 130 Feet (using Bullet Train AOC)
Bandwidth: 18 Gbps (w/ ICT)
HDCP: HDCP 2.2 and earlier
HDMI: Type A
Audio (Extracted Analog): 3 pin terminal block (unbalanced) each
IR Rx: 3.5mm Stereo (3 Conductor) each
RS232: 3 pin terminal block each
Power: 2 pin terminal block each
Storage Temperature: -4 to 140 Degrees F (-20 to 60 Degrees C)
Humidity Range: 5-90% RH (No Condensation)

RECEIVER 818607 kb - Data Sheet

Project List