Signal Routing / Switching : Related Signal Routing / Switching Products : Biamp - Impera SR-4

Impera SR-4 Switching Relay

Model: Impera SR-4

Four relays assignable to screen mode or low voltage applications
Dedicated connection mode for screen or projector lift
Relays may be used for switching either high or low voltage
Test buttons enable testing of relay functions during installation
Installs quickly and easily in drop ceilings

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Impera™ SR-4 is a four-relay unit designed for applications of moderate complexity. Control is via dedicated inputs, one for each relay, accepting control signals from an Impera controller. Separate highvoltage relay connections are provided, as well as a dedicated “screen mode” connection. Test buttons are provided for manual activation of relays, with LEDs for indication of relay state (open or pulled).

Four relays assignable to screen mode or low voltage applications
Dedicated connection mode for screen or projector lift
Relays may be used for switching either high or low voltage
Test buttons enable testing of relay functions during installation
Installs quickly and easily in drop ceilings
Internal tabs for securing cables
Covered by Biamp Systems’ five-year warranty

Spec Sheet available - Yes

Depth: 7.70 in
Height: 2.80 in
Width: 9.60 in
AC Voltage: 230 Volts
Altitude: 0-6,600 ft (0-2000 m) MSL
Humidity: 10-90% relative humidity (non-condensing)
Product Weight: 2.10 lbs
Certifications: CE
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Current Draw: 0.50 Amps
Max Load (AC-1): 1150 W
Max Load (AC-15):: 500 W
Single-Phase Motor Rating: 370 W
Baud Rate: 9600
Data bits: 8
Stop bits: 1

Switching Relay 474709 kb - Data Sheet

Project List