Community R.35COAX - Two-way, 10-inch, full-range coaxial loudspeaker
Series: Community
Model: Community R.35COAX
Part #: 1241.900
- Excellent musicality and intelligibility, low distortion, and high sensitivity and output
- Weather-resistant, compact, matte finish paintable high impact ABS plastic modified-trapezoidal enclosure
- NeverWetâ„¢ treated grille and LF driver cones, polymer HF diaphragm, and moisture-sealed crossover
- Corrosion-resistant zinc-rich epoxy dual-layer powder- coated steel grille and low-profile yoke
The R.35COAX is a two-way, full-range loudspeaker system designed to provide high quality voice and music reproduction in applications requiring extreme weather resistance. It is designed to withstand long-term exposure to tough, environmental conditions and to provide performance normally associated only with indoor loudspeakers. The R.35COAX has a 1.25-inch (32mm) exit HF compression driver and a 10-inch (254mm) cone LF driver with a 2-inch voice coil. The HF assembly is coaxially mounted with the LF driver allowing 90° conical coverage with low distortion. The carbon ring cone design provides a cone area nearly equivalent to a typical 12-inch driver cone. The Music / Voice switch provides an out-of-the-box selectable flat response or 3dB boost for increased vocal intelligibilty allowing for additional application flexibility. The design uses Community's proprietary Tru-Phase™ phase plug to provide wide dispersion, low distortion and increased intelligibility. The LF driver cone is treated with the same NeverWet™ protection as the grille cloth to provide full weather-resistance. Enclosure has a reinforced ribbed interior with weather-treated wooden inserts to reduce resonance, increase rigidity and reduce rear and lateral radiation.
- Excellent musicality and intelligibility, low distortion, and high sensitivity and output
- Weather-resistant, compact, matte finish paintable high impact ABS plastic modified-trapezoidal enclosure
- NeverWetâ„¢ treated grille and LF driver cones, polymer HF diaphragm, and moisture-sealed crossover
- Corrosion-resistant zinc-rich epoxy dual-layer powder- coated steel grille and low-profile yoke
- Real compression driver on Tru-Phaseâ„¢ waveguide
- 200W Autoformer (standard)
- Structurally rigid with weather sealed wood inserts to reduce resonance and rear radiation
- Light Grey, Black and White finish standard - Custom colors available upon request.
- Five-year product warranty / Fifteen-year enclosure warranty
- Loudspeaker Mount Type - Flown
- Warranty - Yes
- Transformer Option - Yes
- Horizontal Symmetry - Yes
- Vertical Symmetry - Yes
- Loudspeaker Voltage - 70V
- Loudspeaker Voltage - 100V
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 10 in
- Maximum Frequency Response (Bandwidth): 12.50 kHz
- Maximum Frequency Response (Bandwidth): 12500 Hz
- Minimum Frequency Response (Bandwidth): 110 Hz
- Minimum Frequency Response (Bandwidth): 0.11 kHz
- 100V Taps: 200, 100, 50 Watt
- 70V Taps: 200, 100, 50, 25 Watt
- Construction: ABS plastic (Enclosure)
- Impedance: 8 ohm
- Maximum SPL (Sound Pressure Level): 122 dB
- Power Handling: 200 Watt
- Sensitivity: 99 dB
- Transformer Option: Yes
- DC Voltage: 40 Volts
- Depth: 13.50 in
- Height: 11 in
- Width: 13 in
- Product Weight: 26 lbs
- Shipping Weight: 32 lbs
- Sustainability Rating: IP55
- Warranty (Length/Type): 5 years
- Coverage Horizontal: 90 degrees
- Coverage Vertical: 90 degrees
- Horizontal Symmetry: Yes
- Vertical Symmetry: Yes
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/