TesiraFORTÉ DAN VT4 - Fixed Audio Digital Signal Processor with 4 Analog Inputs, 4 Analog Outputs and AEC Technology/USB Audio
Model: TesiraFORTÉ DAN VT4
Part #: 0453.900
- 32x32 channels of digital audio networking via the Dante protocol
- 4 mic/line level inputs with AEC, 4 mic/line level outputs
- Gigabit Ethernet port
- Up to 8 channels of configurable USB audio
- RS-232 serial port
The TesiraFORTE® DAN VT4 is a fixed audio DSP with 32 bi-directional channels of Dante™ digital audio, 4 analog inputs, 4 channels of Acoustic Echo Cancellation (AEC) technology, and 4 analog outputs. It also includes up to 8 channels of configurable USB audio, a 2-channel VoIP interface and a standard FXO telephone interface. USB audio allows TesiraFORTE to interface directly with USB audio hosts, as well as to take full advantage of today's most sophisticated conferencing solutions. TesiraFORTE DAN VT4 also provides extensive audio processing, including but not limited to - AEC technology, signal routing and mixing, equalization, filtering, dynamics, and delay, as well as control, monitoring, and diagnostic tools, all configured through the Tesira configuration software. TesiraFORTE DAN VT4 is best-suited for smaller rooms that require high-quality audio solutions using VoIP, voice lift, mix-minus, and AEC, such as conference rooms or distance learning environments.
- 32x32 channels of digital audio networking via the Dante protocol
- 4 mic/line level inputs with AEC, 4 mic/line level outputs
- Gigabit Ethernet port
- Up to 8 channels of configurable USB audio
- RS-232 serial port
- 4-pin GPIO
- 2-line OLED display with capacitive-touch navigation
- Rack mountable (1RU)
- System configuration and control via Ethernet
- Internal universal power supply
- SIP VoIP interface via a RJ-45 connector
- Standard FXO telephone interface via RJ-11 connector
- Signal processing via intuitive software allows configuration and control for signal routing, mixing, equalization, filtering, delay and much more
- Benefits -
- Integrates VoIP, POTS, and USB audio in one product allowing integrators to choose the type of audio conferencing that works best for their installation
- Includes default configuration file allowing for plug-and-play usage
- Highly scalable and cost-effective solution that can grow over time with the needs of the customer
- SpeechSense™ technology to enhance speech processing
- Integrates directly with soft codecs and other USB audio hosts
- Dante Enabled - Yes
- Rackmountable - Yes
- ROHS Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Depth: 10.50 in
- Height: 1.75 in
- Width: 19 in
- Maximum Input: +24dBu
- A/D - D/A Converters: 24-bit
- Product Weight: 8 lbs
- Active Power: 100 Watt
- Input Gain Range (6dB steps): 0 to 66dB
- Warranty (Length/Type): 5
- Certifications: CE, UL, FCC
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Dynamic Range: 108 dB
- Number of Inputs: 4
- Number of Outputs: 4
- Rack Units (Height): 1
- Input Impedance: 8000 ohm
- Output Impedance: 207 ohm
- Sampling Rate/Frequency: 48000 Hz
- Sampling Rate/Frequency: 48 kHz
- Sampling Rate/Frequency: 0 Ghz
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 35 Amps
- AC Voltage (Minimum): 240 Volts
- USB:
•Bit Depth: 16- or 24-bit
•Number of Channels: up to 8
•Sample Rate: 48kHz - THD+N (22Hz to 22kHz): 0dB gain, +4dBu input: < 0.006%, 54dB gain, -50dBu input: < 0.040%
- EIN (no weighting, 22Hz to 22kHz): Less than -125dBu
- Maximum Output (selectable): +24dBu, +18dBu, +12dBu, +6dBu, 0dBu, -31dBu
- Crosstalk, channel to channel, 1 kHz: 0dB gain, +4dBu input: less tahn -85dB, 54dB gain, -50dBu input: less than -75dB
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/