Audio Production Equipment : Audio Processors : Bose Professional - ControlSpace ESP-1240AD US-120V

ControlSpace ESP-1240AD Engineered Sound Processor

Model: ControlSpace ESP-1240AD US-120V

Part #: 812848-1110

High-quality analog circuitry offers both mic and line-level I/O, operates with ultra-low noise and 115 dB dynamic range
Advanced digital signal processing supports audio at 48 kHz sample rate/24-bit, uses a floating-point open architecture DSP and operates at low latencies for sound system precision
Integrated Dante™ audio networking supports 32x32 audio channels for connection to other Dante-enabled products
Integrated AmpLink connection uses standard CAT 5 cables to send up to 8 channels of low-latency, uncompressed digital audio to compatible Bose amplifiers
Bose ControlSpace Designer software enables a large set of signal processing modules, such as automatic mic mixing, multiband graphic and parametric EQs, Bose loudspeaker libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, so

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

An open-architecture DSP, the Bose ControlSpace ESP-1240AD engineered sound processor is designed for a wide variety of applications - from small, self-contained projects to large, networked systems. It features integrated Dante® audio networking, 12x4 analog audio I/O, a Bose AmpLink output, and a front-panel RJ-45 Ethernet connection for localized configuration and monitoring. Engineered for precise performance, the ControlSpace ESP1240AD offers advanced digital signal processing with 48 kHz/24-bit audio conversion, low-latency, and ultra-low noise operation.

High-quality analog circuitry offers both mic and line-level I/O, operates with ultra-low noise and 115 dB dynamic range
Advanced digital signal processing supports audio at 48 kHz sample rate/24-bit, uses a floating-point open architecture DSP and operates at low latencies for sound system precision
Integrated Dante™ audio networking supports 32x32 audio channels for connection to other Dante-enabled products
Integrated AmpLink connection uses standard CAT 5 cables to send up to 8 channels of low-latency, uncompressed digital audio to compatible Bose amplifiers
Bose ControlSpace Designer software enables a large set of signal processing modules, such as automatic mic mixing, multiband graphic and parametric EQs, Bose loudspeaker libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, so
Front panel RJ-45 Ethernet connection enables localized configuration and monitoring, while enabling network passthrough with the rear-panel network ports
A variety of control options: ControlSpace ESP products are compatible with programmable Bose CC-64 and CC-16 controllers, ControlCenter zone controllers, and ControlSpace Remote clients
Supports industry-standard control systems using a comprehensive serial protocol through onboard RS-232 and Ethernet ports, with available drivers for AMX and Crestron-based systems
Applications:
Auditoriums
Places of worship
Resorts and hospitality venues
Retail stores
Educational institutions

Spec Sheet available - Yes

Depth: 8.50 in
Height: 1.70 in
Width: 19 in
Product Weight: 5.80 lbs
Active Power: 37 Watt
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Dynamic Range: 115 dB
Number of Inputs: 12
Number of Outputs: 4
Total Harmonic Distortion + Noise (THD+N): 0 %
Input Impedance: 12000 ohm
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
AC Voltage (Minimum): 85 Volts
AC Voltage (Maximum): 264 Volts
Output Impedance: 66 ohm

Processor 378159 kb - Data Sheet

Project List

Suggested Products

HDMI Audio Extractor with eARC and ARC

by Vanco International

Audio Delay Device

by Vanco International

8K eARC Audio Processor

by AVPro Edge