Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Signal Processor with Digital Audio Bus
Model: BLU-160
- Four Input / Output Card Slots
- Configurable Inputs / Outputs
- Analog Inputs (with Phantom Power per Channel)
- Analog Outputs
- Digital Inputs (AES/EBU and S/PDIF)
Product Info
Tech Specs
Related Products
Documents
The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus. The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km. Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels. Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets). Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect. 12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect. The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
- Four Input / Output Card Slots
- Configurable Inputs / Outputs
- Analog Inputs (with Phantom Power per Channel)
- Analog Outputs
- Digital Inputs (AES/EBU and S/PDIF)
- Digital Outputs (AES/EBU and S/PDIF)
- Configurable Signal Processing
- Rich Palette of Processing and Logic Objects
- 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
- Clear Front Panel LED Indication
- Informative Front Panel Display
- Bi-Directional Locate Functionality
- 12 Control Inputs and 6 Logic Outputs for GPIO Integration
- Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
- HiQnet Device
- Configuration, Control and Monitoring from HiQnet London Architect
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 95 F
- Operating Temperature (Minimum): 41 F
- Depth: 12.50 in
- Height: 1.75 in
- Width: 19 in
- Product Weight: 9 lbs
- Front Panel Led Indicators-Per Input: Signal Present, CLIP, SYNC/48V, I/O card type (IN, OUT, DIG, AEC)
- Front Panel Led Indicators-Other: LCD Display, Data Activity
- Analog Inputs: Up to 16 electronically balanced on Phoenix Combicon removable screw connectors
- Mic/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps
- Input Impedance: 3.5 kohm
- Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain
- CMRR: >75 dB at 1KHz
- Input Noise (E.I.N.): <-128 dBu typical with 150ohm source
- Phantom Power: 48 V nominal, selectable per input
- A/D Latency: 38.7/Fs
- Digital Inputs: Up to 16 AES/EBU or S/PDIF on Phoenix/Combicon removable screw connectors
- Input Impedance: 110 ohm (AES/EBU), 75 ohm (S/PDIF)
- Sample Rate: 48kHz or 96kHz
- Sample Rate Conversion: 8kHz-96kHz
- THD+N: <-140 dB
- Latency: 3/Fso + (56.581/Fsi) + (55.658/Fso)
- Analog Outputs: Up to 16 electronically balanced on Phoenix/Combicon removable screw connectors
- Maximum Output Level: +19 dBu
- Frequency Response: 20Hz-20KHz (+0.5dB/-1dB)
- THD: <0.01% 20Hz to 20KHz, +10dBu output
- Dynamic Range: 108 dB typical, 22Hz-22KHz unweighted
- Crosstalk: <-75 dB
- D/A Latency: 28/Fs
- Digital Outputs: Up to 16 AES/EBU or S/PDIF on Phoenix/Combicon removable screw connectors
- Output Impedance: 110 ohm (AES/EBU), 75 ohm (S/PDIF)
- Sample Rate: 48kHz or 96kHz
- Sample Rate Conversion: 8kHz-96kHz
- THD+N: <-140 dB
- Latency: 3/Fso + (56.581/Fsi) + (55.658/Fso)
- Control Ports: 12 inputs and 6 outputs
- Control Input Voltage: 0 to 4.5 V
- Control Input Impedance: 4.7kohm to +5V (2-wire mode), >1Mohm (3-wire mode)
- Logic Output Voltage: 0 or +5 V unloaded
- Logic Output Impedance: 440 ohms
- Logic Output Current: 10mA source, 60mA sink
- Watchdog Output: Phoenix/Combicon connector for failsafe control
- Opto Output Current: 14 mA maximum
- Withstanding Voltage: 80 V maximum (Off)
- Series Impedance: 220 ohm (isolated)
- Connectors: RJ45 Ethernet connector
- Maximum Cable Length: 100m/300ft on Category 5 cable between device and Ethernet switch
- Connectors: 2 x RJ45 Ethernet connectors
- Maximum Cable Length: 100m/300ft on Category 5e cable between devices
- Maximum Number of Nodes: 60
- Latency Per Node: 4(+/-1)Fs
- Mains Voltage: 100-240 V AC 50/60Hz
- Power Consumption: <35 VA
- BTU Rating: <188 BTU/hr
AEC Card
- AEC Card for Acoustic Echo Cancellation
Analog Input Card
- Analog Input Card for Mic/Line Inputs
Analog Output Card
- Analog Output Card for Line Outputs
BLU-GPX
- General Purpose I/O Expander
Digital Input Card
- Digital Input Card for AES/EBU, S/PDIF Inputs
Digital Output Card
- Digital Output Card for AES/EBU, S/PDIF Outputs plus Wordclock
Telephone Hybrid Card
- Telephone Hybrid Card for Microphone or Line Level Signals
BSSBLU160DataSheet
664 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
BSS Audio, Ltd.
Model: BLU-160
Request more information from a dealer near you
close
Request more information from a dealer near you