Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
ATSC-SDI 4i
Model: ATSC-SDI 4i
Part #: 5111-001
- Tunes PAL CATV and off-air frequencies, storing up to 125 Channel Presets in memory
- Features intelligent auto-tuning of TV frequencies, with the ability to save channel presets that include the frequency and TV Standard
- Outputs S-Video signal for improved image quality for monitors, large-screen displays and video projectors, employing adaptive comb and anti-aliasing filtering, as well as cross-color and cross-luminance reduction
- Delivers balanced/unbalanced A2/NICAM Stereo audio with programmable volume levels, as well as Mono and Dual A/B audio options
- Switches between tuner and composite stereo AV inputs, outputs simultaneous composite and S-Video NTSC video
Product Info
Tech Specs
Documents
- Tunes PAL CATV and off-air frequencies, storing up to 125 Channel Presets in memory
- Features intelligent auto-tuning of TV frequencies, with the ability to save channel presets that include the frequency and TV Standard
- Outputs S-Video signal for improved image quality for monitors, large-screen displays and video projectors, employing adaptive comb and anti-aliasing filtering, as well as cross-color and cross-luminance reduction
- Delivers balanced/unbalanced A2/NICAM Stereo audio with programmable volume levels, as well as Mono and Dual A/B audio options
- Switches between tuner and composite stereo AV inputs, outputs simultaneous composite and S-Video NTSC video
- Stores programmable tuning ring in memory to control channel access
- Operates using one of several control pathways: Full bi-directional RS-232 control and status feedback
- PC control using free .NET Tuner Helper software (great for saving tuner channels and setup information
- Front-panel programming options for tuning, RS-232 and operation setup
- Optional IC-RC IR wireless remote, discrete IR and wired IR
- Contact closure channel up/down
- Displays Line 22 closed-captioning and on-screen text channel names, interactive menus, and system feedback
- Restores all operation status after loss of power from data stored in nonvolatile memory
- Inserts blue screen video image when unit senses loss of video level
- Works with free Tuner Helper control panel/setup software, operates over RS-232 or Ethernet with IP-232 Interface
- Updates firmware using easy-to-use S12 Flash software
- Mounts in 19" rack with optional RK1 or RK2 kit for dual side-by-side installation
- Accepts IR In input for wired IR control or an external IR sensor.
- AMX InConcert and Crestron i2P software modules available
- Now RoHS certified
- Spec Sheet available - Yes
- Front Panel:
•RS-232 LEDs: Yellow LEDs light when RS-232 data is transmitted (TX) or received (RX)
•Mute A/V: Mutes audio and video
•Mute LED: Red LED lights when A/V is muted (blanks video)
•Volume: Up and down buttons raise and lower volume or front-panel programming mode
•Channel: Up and down buttons select channels from stored tuning ring
•IR LED: Red LED lights when receiving IR data from internal IR sensor, wired IR, or external IR sensor
•Display: Red LED 3 digit, 7 segment LED display for channels and modes - :
- Rear Panel:
•Power In: 2.1mm coaxial jack (inside center conductor positive), 400 mA maximum, 11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
•RS-232 Control: DB-9 male connector, User selectable 300 to 9600 (default) baud, 8 data bits, no parity, 1 stop bit,
•Employs standard ASCII strings from any terminal program, PC, or control system
•Contact Closures: 2 momentary closure inputs in RS-232 connection- Channel Up (Pin 4), Down (Pin 9), GND (Pin 5)
•IR In: 3.5 mm stereo input for external IR sensor or wired IR (no carrier), Discrete codes available for power, TV channel and external AV selection
•GND: Grounding lug
•Antenna/Cable: 'F', female, 75 ohm impedance
•Video Input: RCA female
•Audio Inputs: 2 RCA female stereo unbalanced, 20K ohms impedance
•Maximum Level: +8dBu, (2V RMS), Reference: 0 dBu = .775 V RMS
•Video Output: RCA composite output, 1V p-p at 75 ohm impedance
•S-Video Output: Mini DIN 4-pin, Y - 1V p-p at 75 ohms, C - 0.286 V p-p at 75 ohms (PAL only)
•Audio Outputs: 5-Pin captive screw terminal, stereo, 200 ohm balanced/100 ohm unbalanced impedance
•Selectable for A2/NICAM stereo, mono and dual modes
•Stereo Response: Total Harmonic Distortion (THD): 0.6% maximum, 0.3% typical, 30Hz to 14KHz, Channel Separation: 40dB minimum, 45dB typical
•Mono Response: Total Harmonic Distortion (THD) 0.5%, 0.1% typical, 20Hz to 20KHz
•Audio Level: +4 dBu (1.2V RMS) balanced, 0 dBu (.8V RMS) unbalanced, typical at max volume, +11.5 dBu (2.9V RMS) balanced, +8 dBu (2V RMS) unbalanced peak max output
•Volume Control: 0 to -62 dB and mute in 64 steps - RF Tuner:
•Channels: Up to 125 Channel Presets in non-volatile memory
•Frequency Range: 48 to 863 MHz, 50 KHz fine tune resolution
•PAL:PAL B/G/H A2 and NICAM, D/K A2 and NICAM, I NICAM
•SECAM: SECAM B/G A2, D/K, A2 and NICAM audio
•SECAM L: No closed captioning, on-screen text or blue screen, or S-Video
•Maximum Input: +20dBmV max, +10dBmV nominal
•Video Gain: ±5% maximum, 2% typical
•Video Phase: ±3 degrees maximum, 2 degrees typical - Depth: 6 in
- Height: 1.75 in
- Width: 8.50 in
- Product Weight: 1.50 lbs
- Color: Black
ATSC-SDI 4i Manual
1376604 kb
- Instructions
ATSC-SDI 4i Data Sheet
251665 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Contemporary Research
Model: ATSC-SDI 4i
Request more information from a dealer near you
close
Request more information from a dealer near you