Control Systems : Related Control Systems Products : Crestron Electronics, Inc. - C2N-SDC-DC

Shade and Drape Controller, 24V DC

Series: C2N

Model: C2N-SDC-DC

Part #: 6500565

Controls two 24 VDC shade or drape motors individually or simultaneously (30 W maximum)
The C2N-SDC-DC mounts on a standard 2-gang or 4-inch square electrical box
Four manual pushbutton controls are provided on the faceplate

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes. The C2N-SDC-DC is a Cresnet device with two independently controlled 24V DC outputs, each designed to provide standard up/down or open/close control of a conventional two-wire bidirectional type motor. The C2N-SDC-DC mounts in the wall or ceiling using an off-the-shelf 4" square or 2-gang electrical box. Pushbuttons on the front of the unit allow for manual operation of the motors during installation and setup.

Controls two 24 VDC shade or drape motors individually or simultaneously (30 W maximum)
The C2N-SDC-DC mounts on a standard 2-gang or 4-inch square electrical box
Four manual pushbutton controls are provided on the faceplate

Spec Sheet available - Yes

Width: 4.10 in (10.42 cm)
Height: 4.10 in (10.42 cm)
Depth: 1.16 in (2.95 cm)
Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 41 F
Product Weight: 0.55 lbs
Motor Control Channels: 2
Load Ratings Per Channel: 30 W (1.25 Amps) at 24 Volts DC)
Total Load Ratings: 30 W (1.25 Amps) at 24 Volts DC)
Load Type: 2-Wire 24V DC bidirectional motors, Somfy LT28B or similar
Power Requirement Cresnet Power Usage: Up to 33 W (1.38 Amps at 24 Volts DC)

C2N-SDC - Shade and Drape Controller, 120V AC

C2N-SDC-DC Data Sheet.pdf 386 kb - Data Sheet

Project List