3-Series Card Interface - 3 Slot

Model: CEN-CI3-3

Part #: 6505371

Accepts up to three 3-Series® Control Cards
Provides control port expansion for any 3-Series Control System®
External power pack included
Single-space 19-inch rack-mountable

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The Crestron® CEN-CI3-3 is a single-space rack-mountable device designed to provide a versatile control interface and expansion solution using up to three 3-Series® Control Cards. It is used to expand the control ports of a 3-Series Control System®, and can be installed with the control system at the central equipment cabinet or located remotely near the device(s) under control. It can be placed on a shelf or rack-mounted using the rack ears included. It interfaces with the control system via Ethernet.

The CEN-CI3-3 accepts three 3-Series control cards (sold separately). Control cards are available to support bidirectional RS-232, 422, or 485; IR or 1-way serial; 0-10V analog inputs; digital logic inputs or outputs; and low-voltage relay outputs.

Accepts up to three 3-Series® Control Cards
Provides control port expansion for any 3-Series Control System®
External power pack included
Single-space 19-inch rack-mountable

Spec Sheet available - Yes

Depth: 10.06 in
Height: 1.70 in
Width: 17.28 in
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 41 F
Product Weight: 5.07 lbs
AC Voltage: 240 Volts
Current Draw: 2 Amps
DC Voltage: 24 Volts
Color: Black
Communications:
- Ethernet: 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, IEEE 802.3af and 802.3at Type 1 compliant
- USB: For computer console
Connectors& Card Slots:
- S1 - S3: (3) 3-Series® control card expansion slots
- CONTROL SUBNET IN:
  - (1) 8-wire RJ45 jack
  - 10Base-T/100Base-TX/1000Base-T Ethernet port
- CONTROL SUBNET OUT:
  - (1) 8-wire RJ45 jack
  - 10Base-T/100Base-TX/1000Base-T Ethernet port
- 24VDC 2A MAX:
  - (1) 2.1 x 5.5 mm DC power connector
  - 24 Volt DC power input
  - PW-2420RU power pack included
- G: (1) 6-32 screw, chassis ground lug
- COMPUTER (front):
  - (1) USB Type B female
  - USB 2.0 computer console port (6 ft cable included)
  - For setup only
  - Controls & Indicators:
    - PWR: (1) Green LED, indicates operating power supplied from power pack
    - MSG: (1) Red LED, indicates unit has generated an error message
    - RESET: (1) Recessed pushbutton for hardware reset
    - SETUP: (1) Recessed pushbutton with red LED for Ethernet auto-discovery
    - SLOT 1 – 3: (3) Green LEDs, indicate control cards are inserted in the corresponding slots
    - CONTROL SUBNET IN (rear): (2) Bi-color green/amber LEDs, leftLED indicates Ethernet connection speed, rightLED indicates Ethernet activity
    - CONTROL SUBNET OUT (rear): (2) Bi-color green/amber LEDs, leftLED indicates Ethernet connection speed, rightLED indicates Ethernet activity
  - Environmental:
    - Humidity: 10% to 90% RH (non-condensing)
    - Heat Dissipation: 6 BTU/Hr without cards[1]
  - Enclosure:
    - Chassis: Metal, black finish, vented sides
    - Front Panel: Metal, black finish, polycarbonate label overlay
    - Mounting: Freestanding or 1RU 19-inch rack-mountable (adhesive feet and rack ears included)
  - Notes:
    - 1. See individual control cards spec sheets for additional specifications.

CEN-CI3-1-POE - 3-Series™ Card Interface - 1 Slot, w/PoE Injector

MPC3-102-B - 3-Series Media Presentation Controller 102, Black

MPC3-201-B - 3-series Media Presentation Keypad Controller 201, Black

MPC3-302-B - 3-series Media Presentation Keypad Controller 302, Black

MPC3-302-W - 3-series Media Presentation Keypad Controller 302, White

Card Interface 1076 kb - Data Sheet

Project List

PW-2420RU
2.1mm 24VDC/2.5A Universal Desktop Power Pack