Crestron and Cisco Touch 10 Routing and Control Program

The Crestron and Cisco® Touch 10 Routing and Control Program is a program that allows Crestron® A/V switcher devices to be integrated into a Cisco room control solution and controlled via the Cisco Touch 10 touch screen, increasing the available HDMI® inputs within the room. The Crestron and Cisco® Touch 10 Routing and Control Program requires no custom programming and can be scaled to easily configure thousands of Cisco rooms through the provided user interface.

No Programming Required

The Crestron and Cisco® Touch 10 Routing and Control Program is loaded to the program slot of a Crestron RMC3 or RMC4 control system (or one of ten program slots if Modular Programming Architecture is enabled, allowing up to ten Cisco rooms to be controlled by a single control system1). The program provides an XPanel configuration user interface where the HDMI inputs of a supported Crestron A/V switcher device can be mapped to virtual buttons on the Cisco Touch 10. Updates occur in real time to ensure your room reflects the latest configuration. No custom programming is required.

Deployment Scalability

Using XPanel and Crestron Toolbox™ software, configurations can be copied and sent to multiple rooms for instantaneous deployment across an enterprise. Crestron Toolbox permits integrators to distribute configuration files to multiple units on a network over a secure TCP (SSH) connection. If certain rooms require a different configuration, simply make the necessary changes in the program and distribute the modified configuration to those rooms. Crestron also supports an RS?232 Cisco Touch 10 control option for cases where there is no network connection available (or when one is not desired).

Enterprise-Grade Features

Integrating a Cisco room with Crestron equipment via the Crestron and Cisco® Touch 10 Routing and Control Program allows an enterprise to take advantage of the following features that only Crestron provides: