3-series 4K DigitalMedia Presentation System 350 with AirMedia 2.0 capability built-in

Model: DMPS3-4K-350-C

Part #: 6508338

Ultra high-definition 9x4 system switcher, scaler, mic mixer, audio DSP, amplifier, and control system
Built-in .AV Framework™ delivers a fully-functional system without any programming
Integrated 3-Series Control System® allows fully-programmable room control
Onboard AirMedia® gateway enables wireless BYOD presentation capability
Built-in H.264 streaming video decoder

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Videos

The DMPS3-4K-350-C from Crestron® offers an all-in-one 4K AV presentation system for classrooms, boardrooms, lecture halls, and videoconference rooms. Delivering a complete, custom-programmable room solution with fully-configurable signal routing and processing is easy and cost-effective using the DMPS3-4K-350-C. In one 3-space rack mount package, it integrates the control system, matrix switcher, video scalers, streaming decoder, mic mixer, audio DSP, and amplifier. Its built-in AirMedia® gateway, when activated, enables wireless presentation from computers and mobile devices. DigitalMedia 8G+® and HDBaseT® connectivity affords a streamlined, long-distance wiring solution for remote sources and display devices, and for facility-wide integration as part of a larger media distribution system.

Note: To purchase the DMPS3-4K-350-C with AirMedia pre-activated (no license required), see model DMPS3-4K-350-C-AIRMEDIA.

4K Ultra HD

Crestron DigitalMedia™ continues to advance the standard for digital AV signal management, delivering the most complete end-to-end 4K system solutions available. The DMPS3-4K-350-C handles 4K/60 video with HDCP 2.2 encryption, ensuring support for all the latest 4K and Ultra HD displays and media sources. Support for 4K is also essential to support the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.

No Programming Required

Installing the DMPS3-4K-350-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: http://www.crestron.com/avframework.

AirMedia® Wireless Presentation

Built-in AirMedia technology allows for wireless presentation of content from a laptop, smartphone, or tablet device via a Wi-Fi® wireless network. With AirMedia, anyone can walk into the room with a Windows® or MacBook® laptop and connect without wires, enabling the presentation of any content including Full HD video at frame rates up to 30 fps. iPhone®, iPad®, and Android™ devices can present PowerPoint®, Excel®, Word, and PDF documents, as well as pictures, videos, or any app content with full-screen mirroring.

Ultra high-definition 9x4 system switcher, scaler, mic mixer, audio DSP, amplifier, and control system
Built-in .AV Framework™ delivers a fully-functional system without any programming
Integrated 3-Series Control System® allows fully-programmable room control
Onboard AirMedia® gateway enables wireless BYOD presentation capability
Built-in H.264 streaming video decoder
Provides matrix signal routing for up to 9 video sources and 4 displays
Handles video resolutions up to 4K DCI and Ultra HD
Includes HDMI®, DM 8G+®, and balanced stereo analog audio inputs
Also supports Dual-Mode DisplayPort, DVI, and HDBaseT® sources
QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching
Auto-Locking® technology achieves rapid switching between disparate sources
Performs automatic AV signal format management via EDID
HDCP 2.2 compliant
Provides adjustable input level compensation on each audio input
Includes built-in 6-channel gated microphone mixing with DSP
Provides two HDMI and two DM 8G+ (HDBaseT compatible) outputs
DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable
HDBaseT Certified - Enables direct connection to other HDBaseT certified equipment
Features an independent, high-performance 4K scaler at each HDMI output
Upscales input signals to match the native resolution of any screen - including 4K and Ultra HD displays!
Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays
Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K
Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing
Provides 3D to 2D signal conversion
Provides three balanced stereo audio outputs, each with independent mixer and DSP
Provides two additional audio mixes, either of which is selectable at any digital output
Features a built-in amplifier, selectable for 25W/Ch. at 8-OHM stereo or 50W at 70/100 Volts mono
Enables analog-to-HDMI audio embedding and de-embedding
Enables USB signal routing via DM® transmitters and receivers or USB-EXT-DM series extenders
Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports
Supports Crestron® touch screens, keypads, and wireless remotes
Supports XPanel with Smart Graphics® computer and web based control
Supports iPhone®, iPad®, and Android™ control apps
Supports universal remotes via external RC-5 compatible IR receiver
Communicates natively with Crestron Fusion®
Enables IT-friendly network integration via SNMP
Integrated Ethernet switch provides a single-point LAN connection
Control Subnet - provides a dedicated local network for Crestron devices
Private Network Mode - requires just one IP address for the complete system
Content LAN port allows streaming and AirMedia traffic to be isolated on a secondary network
Includes front panel controls for basic configuration, diagnostics, and signal routing
Includes customizable front panel label strips and LCD display
Allows advanced setup and adjustment via a web browser
Features an internal universal power supply for worldwide compatibility
Furnishes power to PoDM+ and HDBaseT PoE+ powered devices
3-space 19-inch rack-mountable

Distributed Signal Types - Audio
Distributed Signal Types - Digital Media
Distributed Signal Types - Video
Rackmountable - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Certifications: CE, UL, FCC
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 93 Watt
Depth: 15.75 in
Height: 5.20 in
Width: 19 in
Product Weight: 15.50 lbs
Regulatory Compliance: HDCP
Operating System:
•Crestron 3-Series, real-time, preemptive, multi-threaded/multitasking kernel, Transaction-Safe Extended FAT file system, supports up to 10 simultaneously running programs, preloaded DMPS3 .AV Framework Base Program
MEMORY:
•SDRAM: 512MB
•Flash: 4GB
COMMUNICATIONS:
•Ethernet: 10/100/1000Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet™/IP, IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client, RSTP, Private Network Mode
•Control Subnet: 10/100/1000Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode, IEEE 802.3at Type 1 compliant PoE PSE
•AirMedia : (Via Ethernet) 10/100Mbps, IPv4, DHCP, TLS, AES, mDNS, HTTPS web server
•Streaming: (Via Ethernet) 10/100Mbps, DHCP, H.264 decoding, MJPEG decoding, HDCP 2.2, RTP, RTSP, SDP
•Cresnet: Cresnet master mode
•USB: USB signal routing via select DM transmitters and receivers, or via USB-EXT-DM series extenders ; USB device port for computer console (setup)
•RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
•IR/Serial: 1-way device control via infrared up to 1.2MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; supports CNXRMIRD IR Receiver
•DigitalMedia: DM 8G+, HDCP 2.2, EDID, CEC, PoDM+, Ethernet
•HDBaseT: HDCP 2.2, EDID, CEC, RS-232, PoE+, Ethernet
•HDMI: HDCP 2.2, EDID, CEC
•NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI and HDBaseT devices and the control system
Video:
•Switcher: 9x4 matrix, Crestron QuickSwitch HD technology
•Scalers (HDMI outputs): (2) 4K video scalers with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion, content-adaptive noise reduction, and widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1)
•Input Signal Types: HDMI w/Deep Color, 3D, and 4K (DVI and Dual-Mode DisplayPort compatible ) on Inputs 1-6; DM 8G+ and HDBaseT w/Deep Color, 3D, and 4K on Inputs 7 and 8; streaming and AirMedia on Input 9 (LAN)
•Output Signal Types: HDMI w/Deep Color and 4K (DVI compatible ) on Outputs 1 and 2; DM 8G+ and HDBaseT w/Deep Color, 3D, and 4K on Outputs 3 and 4
Streaming Decoder:
•Video Formats: H.264 (MPEG-4 part 10 AVC), MJPEG
•Audio Format: AAC stereo
•Bitrates: Up to 25Mbps
•Resolutions: Up to 1080p60
AirMedia:
•Users: Supports up to 32 users (presentation device connections)
•Client Software OS Support: Windows 7, Windows 8, Window 10, Mac® OS X® (versions 10.10 through 10.13)
•Client Software Video Frame Rate: 30 fps, audio supported
•Mobile App OS Support: Apple® iOS, Android
•Full Screen Device Mirroring: Shares the screen image and audio from an Apple iOS, Android, Mac OS X, or Windows device
•Resolutions: 800x600 at 60Hz, 1024x768 at 60Hz, 1280x720 at 60Hz (720p60), 1280x768 at 60Hz, 1280x800 at 60Hz, 1280x1024 at 60Hz, 1360x768 at 60Hz, 1400x1050 at 60Hz, 1440x900 at 60Hz, 1600x1200 at 60Hz, 1920x1080 at 60Hz (1080p60), 1920x1200 at 60Hz
•Audio Format: Stereo
Audio – General:
•Switcher/Mixer: 14x5 stereo source matrix switcher, digital and analog source inputs, streaming and AirMedia source input, 6-channel gated mic mixer w/DSP, independent mixer per analog output (6-ch mic + 1 stereo source), independent stereo DSP per analog output, integrated power amplifier, two independent digital output mixers (6-ch mic + 1 stereo source), 2x1 digital output mix selector per digital output
•Analog-To-Digital Conversion: 24-bit 48kHz
•Digital-To-Analog Conversion: 24-bit 48kHz
•Frequency Response, Digital and Analog Line Outputs:
•20 Hz to 20kHz +/-0.5dB (digital source)
•20 Hz to 20kHz +/-0.5dB (analog line source)
•20 Hz to 20kHz +/-0.7dB (microphone source)
•Frequency Response, Speaker Output:
•20 Hz to 20kHz +/-1dB at 25 Watts into 8 Ohms
•100 Hz to 20kHz +/-2.5dB at 70 or 100 Volts
•S/N Ratio, Digital and Analog Line Outputs:
•>108dB, 1kHz, A-weighted (digital source)
•>103dB, 1kHz, A-weighted (analog line source)
•S/N Ratio, Speaker Output:
•98dB at 25 Watts into 8 Ohms, 1kHz, A-weighted
•96dB at 25 Watts into 4 Ohms, 1kHz, A-weighted
•THD+N, Digital and Analog Line Outputs:
•<0.002%, 20 Hz to 20kHz (digital source)
•<0.005%, 20 Hz to 20kHz (analog line source)
•<0.05%, 20 Hz to 20kHz (microphone source)
•THD+N, Speaker Output:
•<0.1%, 1kHz at 25 Watts into 4 or 8 Ohms
•<0.7%, 20 Hz to 20kHz at 25 Watts into 4 or 8 Ohms
•Stereo Separation, Digital and Analog Line Outputs:
•>108dB (digital source)
•>103dB (analog source)
•Stereo Separation, Speaker Output:
•>65dB at 25 Watts, 1kHz
•Channel Separation, Digital Outputs:
•>108dB (digital source)
•>103dB (analog source)
•Channel Separation, Analog Line Outputs: >103dB
•Speaker Output Modes: 4-OHM/8-OHM stereo, 70V mono, or 100V mono
•Speaker Amplifier Output Power:
•25 Watts RMS per channel at 8 Ohms, 4 Ohms tolerant
•50 Watts RMS at 70 or 100 Volts
Audio - Microphone Inputs:
•Typical of 6 microphone input channels (Mic/Line 1 - 6)
•Input Signal Types: Mono analog mic or line level
•Phantom Power: Enable/Disable per channel
•Gain: 0 to +60dB Gain adjustment in 3dB increments, plus Mute
•Delay: 0.0 to 85.0ms
•EQ Center Frequencies: 50 to 200 Hz (Band 1), 200 to 800 Hz (Band 2), 800 to 3.2k Hz (Band 3), 3.2k to 12.8k Hz (Band 4)
•EQ Gain: +/-12.0dB per band
•High-Pass Filter: On or Off
•Gating Threshold: -80 to 0dB
•Gating Depth (Attenuation): -80 to 0dB
•Gating Attack: 1 to 250ms
•Gating Release: 1 to 1000ms
•Compression Threshold: -80 to 0dB
•Compression Ratio: 1:1 to 10:1
•Compression Attack: 1 to 250ms
•Compression Release: 1 to 1000ms
•Compression Curve: Hard or soft knee
Audio - Source Inputs:
•Input Signal Types: HDMI (Dual-Mode DisplayPort compatible ) on Inputs 1-6, DM 8G+ and HDBaseT on Inputs 7 and 8, streaming and AirMedia on Input 9 (LAN), analog 2-channel on Aud In 1-5
•Analog Formats: Stereo 2-channel
•Digital Formats: 2-channel LPCM
•Input Compensation: +/-10.0dB, adjustable per input
Audio - Analog Line and Speaker Outputs:
•Typical of 1 analog line/speaker output (Program Out and Speaker Output) and 2 analog line outputs (Aux Out 1 - 2)
•Output Signal Type/Format: Stereo 2-channel
•Mic 1 - 6: -80 to +10dB Level adjustment range, plus Mute and Pan
•Mics Master: -80 to +10dB Level adjustment range, plus Mute
•Source: -80 to +10dB Level adjustment range, plus Mute and Balance
•Master Volume: -80 to +10dB Level adjustment range, plus Mute and Mono
•Mixer Presets: 1 through 5
•Bass: +/-12.0dB
•Treble: +/-12.0dB
•Equalization: 10-band graphic + 4-band parametric
•GEQ Center Frequencies: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
•GEQ Gain: +/-12.0dB per band
•PEQ Center Frequencies: 10 to 22000 Hz per band
•PEQ Gain: -36.0 to +24.0dB per band
•PEQ Bandwidth: 0.02 to 3.50 octaves per band
•PEQ Types: Peaking EQ, High Pass, Low Pass, High Shelf, Low Shelf, Notch
•Delay: 0.0 to 85.0ms
•Limiter Threshold: -80 to 0dB
•Limiter Ratio: 1:1 to 10:1
•Limiter Attack: 1 to 250ms
•Limiter Hold: 1 to 200ms
•Limiter Release: 1 to 1000ms
•Limiter Curve: Hard or soft knee
•EQ Presets: 1 through 10 (includes Delay and Limiter settings)
Audio - Digital Outputs:
•Typical of 4 digital outputs (HDMI Output 1 - 2 and DM Output 3 - 4)
•Output Signal Types: HDMI (DVI compatible ) on Outputs 1 and 2, DM 8G+ and HDBaseT on Outputs 3 and 4
•Formats: 2-channel LPCM
•Digital Output Mix Select 1 - 2: Selects which mix is routed to the corresponding output
•Typical of 2 digital output mixers:
•Mic 1 - 6: -80 to +10dB Level adjustment range, plus Mute and Pan
•Mics Master: -80 to +10dB Level adjustment range, plus Mute
•Source: -80 to +10dB Level adjustment range, plus Mute and Balance
•Master Volume: -80 to +10dB Level adjustment range, plus Mute
•Mixer Presets: 1 through 5
Connectors - Audio/Video Inputs:
•AUD IN 1 - 5: (5) 5-pin 3.5 mm detachable terminal blocks
•Balanced/unbalanced stereo line-level analog audio inputs
•Input Impedance: 24k Ohms balanced/unbalanced
•Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced
•MC1/LN1 - MC6/LN6: (6) 5-pin 3.5 mm detachable terminal blocks
•Comprises (6) balanced microphone/line audio inputs
•Balanced Mic Input Level: -60 to 0dBV, 1 Vrms maximum
•Balanced Line Input Level: -31 to +11dBV, 3.7 Vrms maximum
•Unbalanced Line Input Level: -37 to +5dBV, 1.85 Vrms maximum
•Mic Input Impedance: 3.9k Ohms balanced
•Line Input Impedance: 19k Ohms balanced, 9.5k Ohms unbalanced
•Phantom Power: 48 Volts DC, software enabled/disabled per channel
•HDMI 1 - 6 INPUTS: (6) HDMI Type A connectors, female
•Digital video/audio inputs
• (DVI and Dual-Mode DisplayPort compatible)
•DM INPUT 7 - 8: (2) 8-pin RJ45 connectors, female, shielded
•DM 8G+ inputs, HDBaseT compliant
•PoDM+ PSE ports (HDBaseT PoE+ compatible)
•Each connects to the DM 8G+ output of a DM transmitter or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable
Connectors - Audio/Video Outputs:
•SPEAKER OUTPUT 4-OHM/8-OHM L - R: (2) 2-pin 7.62 mm 15A detachable terminal blocks
•4-8 Ohm stereo speaker-level audio output
•Wire Size: Terminals accept up to 14 AWG (2.5 mm2)
•Output Power: 25 Watts RMS per channel stereo at 8 Ohms, 4 Ohms tolerant
•SPEAKER OUTPUT 70/100V: (1) 2-pin 7.62 mm 15A detachable terminal block
•Transformer-isolated 70 or 100 Volt mono speaker-level audio output
•Wire Size: Terminals accept up to 14 AWG (2.5 mm2)
•Output Power: 50 Watts RMS mono at 70 or 100 Volts
•Note: 4-OHM/8-OHM and 70/100V outputs are mutually exclusive
•PROG OUT: (1) 5-pin 3.5 mm detachable terminal block
•Balanced/unbalanced stereo line-level audio output
•Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced
•Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
•AUX OUT 1 - 2: (2) 5-pin 3.5 mm detachable terminal blocks
•Balanced/unbalanced stereo line-level audio outputs
•Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced
•Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
•HDMI 1 - 2 OUTPUTS: (2) HDMI Type A connectors, female
•Digital video/audio outputs, (DVI compatible )
•DM OUTPUT 3 - 4: (2) 8-pin RJ45 connectors, female, shielded
•DM 8G+ outputs, HDBaseT compliant
•PoDM+ PSE ports (HDBaseT PoE+ compatible)
•Each connects to the DM 8G+ input of a DM receiver or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable
Connectors - Networking, Control, and Power:
•IR - SERIAL OUT 1 - 4: (4) 2-pin 3.5 mm detachable terminal blocks
•IR/Serial output ports
•IR output up to 1.2MHz
•1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
•IR IN: (1) 3-pin 3.5 mm detachable terminal block
•For connection of the CNXRMIRD IR Receiver
•Allows control from IR wireless remotes using RC-5 command set
•INPUT 1 - 4: (1) 5-pin 3.5 mm detachable terminal block
•Comprises (4) programmable digital inputs
•Input Voltage Range: 0 to 24 Volts DC, referenced to GND
•Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
•Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts
•Pull-up Resistor: 2.2k Ohms per input
•RELAY 1 - 4: (1) 8-pin 3.5 mm detachable terminal block
•Comprises (4) normally open, isolated relays
•Rated 1 Amp, 30 Volts AC/DC
•MOV arc suppression across contacts
•COM A - B: (2)dB9 connectors, male
•Bidirectional RS-232 ports
•Up to 115.2k baud, hardware and software handshaking support
•NET: (4) 4-pin 3.5 mm detachable terminal blocks
•Cresnet Master ports, paralleled
•Available Cresnet Power: 10 Watts
•PoDM+ INPUT PWR: (1) Combo D-Sub 7w2 connector, male
•48 Volt DC power input for PoDM power supply
•Enables PoDM+ power sourcing on each DM INPUT/OUTPUT port
•Enables PoE power sourcing on the CONTROL SUBNET port
•SERVICE: (1) USB Type B connector, female
•For factory use only
•100-240V~ 6.0A 50/60Hz: (1) IEC 60320 C14 main power inlet
•Mates with removable power cord, included
•G: (1) 6-32 screw
•Chassis ground lug
•CONTENT LAN IN 9: (1) 8-pin RJ45 connector, female
•10Base-T/100Base-TX Ethernet port
•Provides a dedicated LAN connection for streaming input and AirMedia
•CONTROL SUBNET: (1) 8-pin RJ45 connector, female
•10Base-T/100Base-TX/1000Base-T Ethernet port
•PoE PSE (Power Sourcing Equipment) port
•Provides a dedicated local network for Crestron devices
•LAN: (1) 8-pin RJ45 connector, female
•10Base-T/100Base-TX/1000Base-T Ethernet port
•COMPUTER (front): (1) USB Type B connector, female
•USB computer console port (for setup only)
Controls and Indicators:
•PWR: (1) Green LED, indicates operating power supplied from AC power line
•NET: (1) Yellow LED, indicates Cresnet bus activity
•LAN: (1) Yellow LED, indicates Ethernet activity
•HW-R: (1) Recessed pushbutton for hardware reset, reboots the control system
•SW-R: (1) Recessed pushbutton for software reset, restarts the software program
•LCD Display: (1) Green LCD alphanumeric, adjustable backlight, 2 lines x 20 characters per line, displays input/outputs by name, volume levels, setup menus, signal routing, device info, and other system information
•SOFTKEYS: (4) Pushbuttons for activation of LCD driven functions and passcode entry
•MENU: (1) Pushbutton, steps the menu back one level
•A, V: (2) Pushbuttons, for scrolling up or down through the menu and adjusting menu parameters
•ENTER: (1) Pushbutton, executes the highlighted menu or value
•VOLUME: (1) Continuous turn rotary encoder, adjusts menu parameters, defaults to Program audio volume
•MUTE: (1) Pushbutton and red LED, mutes the Program audio output
•INFO: (1) Pushbutton and red LED, selects INFO mode to view AV and device info
•ROUTE: (1) Pushbutton and red LED, selects ROUTE mode to allow routing changes
•VIEW: (1) Pushbutton and red LED, selects VIEW mode to view current routing
•INPUT 1 - 9: (9) Pushbuttons and red LEDs, each selects the corresponding video input for routing
•OUTPUT 1 - 4, PROG, AUX 1 - 2: (7) Pushbuttons and red LEDs, each selects the corresponding video or audio output for routing
•SPEAKER OUTPUT (rear): (1) 3-position slide switch, selects the amplifier output configuration
•DM INPUT 7 - 8 (rear): (4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each corresponding port
•DM OUTPUT 3 - 4 (rear): (4) LEDs, green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence, for each corresponding port
•CONTENT LAN IN 9 (rear): (2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status
•CONTROL SUBNET (rear): (2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status
•LAN (rear): (2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status
Power
•Power over DM (PoDM): IEEE 802.3at compliant PoDM+ PSE (Power Sourcing Equipment), each DM INPUT/OUTPUT port supplies up to 30 Watts to power one PoDM (Class 0-3) or PoDM+ (Class 4) PD (Powered Device)
•Power over HDBaseT::
Environmental:
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: 317 BTU/hr typical, 246 BTU/hr idle
Enclosure:
•Chassis: Metal, black finish, fan-cooled, vented sides
•Front Panel: Metal, black finish with polycarbonate label overlay
•Mounting: Freestanding or 3 RU 19-inch rack-mountable (adhesive feet and rack ears included)

DM-DGE-200-C - Digital Graphics Engine 200 with 4K DM 8G+ Input

DMPS3-4K-250-C - 3-series 4K DigitalMedia Presentation System 250 with AirMedia 2.0 capability built-in

DigitalMedia Presentation System 5943761 kb - Other

Project List

DigitalMedia Presentation System 1666272 kb - Data Sheet

Project List

Crestron AirMedia 2.0: The Fastest, Most Manageable and Secure Wireless Presentation Technology

Project List