Mid-row Cable Retractor Adapter Bracket for FT2-1200 Series
Model: FT2A-CBLR-BRKT-1200
Part #: 6510689
- Enables installation of two cable retractors in the middle module positions within an FT2-1200 Series FlipTopâ„¢
- Attaches below the table to the front or rear of the FlipTop chassis
- Provides mounting slots for two retractors and one power supply
- Compatible with FT2-1200-MECH and FT2-1200-ELEC Series FlipTopsâ„¢
- Compatible with Gravity Retractors and One-Touch Retractors (FT2A-CBLR-GR and FT2A-CBLR-1T Series respectively)
The FT2A-CBLR-BRKT-1200 is an adapter bracket for a Crestron® FT2-1200 Series FlipTop™ that enables the installation of two cable retractors in the middle positions within the FlipTop. It attaches to the front or rear of the FlipTop chassis beneath the table, and provides mounting slots for two retractors and one power supply.
FT2-1200 Series FlipTops normally support the installation of cable retractors at the left and right ends of the module row. Adding the FT2A-CBLR-BRKT-1200 bracket allows retractors to be installed in the middle of the row, allowing for a total of up to four retractors across the entire row. One mid-row retractor occupies the third and fourth module slots, while the other occupies the sixth and seventh slots. A single module space remains at the center of the row (fifth slot) to accommodate any single-space module or blank plate.
When installing mid-row retractors, the bracket and retractors can attach to either the front or rear of the FlipTop chassis below the table. When installed, the mid-row retractor enclosures project from the front or rear of the chassis perpendicular to the end-mounted retractors. The cable connectors nest within the retractor modules above the table at a 90° rotation relative to other connectors within the FlipTop.
- Enables installation of two cable retractors in the middle module positions within an FT2-1200 Series FlipTopâ„¢
- Attaches below the table to the front or rear of the FlipTop chassis
- Provides mounting slots for two retractors and one power supply
- Compatible with FT2-1200-MECH and FT2-1200-ELEC Series FlipTopsâ„¢
- Compatible with Gravity Retractors and One-Touch Retractors (FT2A-CBLR-GR and FT2A-CBLR-1T Series respectively)
- Spec Sheet available - Yes
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/