Stereo 3.5mm Plug to Stereo 3.5mm Plug Gravity Cable Retractor for FT2 Series FlipTops
Series: FT2A-CBLR-GR
Model: FT2A-CBLR-GR-AUDIO
Part #: 6508372
- Convenient and cost-effective connectivity for FT2 Series FlipTops™
- Precision gravity-assisted track and pulley retraction mechanism
- Cable pulls out smoothly to any length up to 34inches (86cm)
- Cable retracts gracefully by simply lifting it vertically above the table
- Highly flexible, low friction flat cable construction
Provides a retractable cable management solution for Crestron® FT2 Series FlipTops™. Features a precision gravity-assisted track and pulley mechanism, which allows each cable to be pulled out smoothly for use, and then retracted gently when done by simply lifting the cable vertically above the FlipTop.
Overview:
Crestron® Gravity Cable Retractors (FT2A-CBLR-GR Series) offer a refined cable management solution for use with Crestron FT2 Series FlipTops™. Each cable pulls out smoothly to any length up to 30inches (76cm) and stays out as long as it remains laying on the tabletop. Simply lifting the cable vertically above the FlipTop™ allows the cable to retract gently back into the FlipTop. Gravity cable retractors use a precision gravity-assisted track and pulley mechanism housed in a vertical enclosure beneath the table.
Each Gravity Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A 4ft long cable tail is provided below the table for connection to a DM® transmitter or similar interface device. The pull-out end of the cable passes up through the module so that the connector nests neatly in place and pulls out easily for use. Each module is labeled with an international symbol icon indicating the connection type, which is backlit when installed in an "Electrical" FT2 FlipTop. When installed in a "Mechanical" FlipTop, the symbol icon remains legible but is not backlit.
The pass-though module occupies two modules spaces within the FlipTop. The retractor enclosure slides onto the side of the FlipTop chassis beneath the table and locks into place with a snap. Retractors normally install at the left and right ends of a module row, but can also be installed in the middle of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately). Installation requires 28-7/16inch (722mm) minimum vertical clearance below the top surface of the table. End-mounted retractors require 2-3/8inches (60mm) horizontal clearance to either side of the chassis, while mid-row retractors require 2-3/4inches (70mm) horizontal clearance to the front or rear of the chassis.
- Convenient and cost-effective connectivity for FT2 Series FlipTops™
- Precision gravity-assisted track and pulley retraction mechanism
- Cable pulls out smoothly to any length up to 34inches (86cm)
- Cable retracts gracefully by simply lifting it vertically above the table
- Highly flexible, low friction flat cable construction
- Robust soft-feel sculpted connectors for easy handling
- Durable construction for years of reliable use
- Backlit international symbol icon identifies the connector type
- Active 4K models support 4K60 4:4:4 digital AV signals
- Support for HDR and HDCP 2.2
- 4K models available for HDMI® and DisplayPort devices
- Additional 4K models available to convert from DisplayPort to HDMI, Mini DisplayPort to DisplayPort, Mini DisplayPort to HDMI, and USB-C™ to HDMI
- Passive models available for VGA, stereo audio, LAN, and USB 3.0
- Requires two module spaces at either end of a FlipTop module row
- Optional mid-row installation using additional brackets
- Retractor housing snaps onto the FlipTop chassis and extends vertically beneath the table
- Requires 28-7/16inch (722mm) vertical clearance below the table top surface
- Provides a 4ft (1.2m) long tail below the table
- Cable Management Type - Other
- Spec Sheet available - Yes
- Depth: 1.85 in
- Height: 25.80 in
- Width: 4.07 in
- Cable:
•Pull-Out Length: Up to 2.83ft (0.86m) above table
•Back End Tail Length: 4ft (1.2m) beneath table - INDICATOR:
•Symbol Icon: (1) Blue LED backlit icon indicating the cable connector type, illuminates constantly when FlipTop is powered - Environmental:
•Temperature: 32° to 113° F (0° to 45° C)
•Humidity: 10% to 90% RH (non-condensing) - Construction:
•Pass-Through Module: Precision fit plastic drop-in module, 2-space, black
•Retractor Enclosure: Metal housing with plastic neck
•End Mounting: Module requires two consecutive module spaces at the left or right end of any module row within the FlipTop chassis
•Enclosure attaches beneath the table to mounting slots on the left or right side of the FlipTop chassis
•Requires 28.4inches (722mm) minimum vertical clearance beneath the top surface of the table
•Projects 2.15 inches (55 mm) from the side of the FlipTop chassis beneath the table, and requires an additional 0.2 inch or 5 mm for installation
•Mid-Row Mounting: Requires an FT2A-CBLR-BRKT series mid-row adapter bracket (one per row, each sold separately)
•Module requires two consecutive module spaces in the middle of any module row within the FlipTop chassis (refer to the relevant FT2A-CBLR-BRKT model spec sheet for additional details)
•Enclosure attaches beneath the table to mounting slots on the front or rear of the FlipTop chassis (via the bracket)
•Requires 28.4inches (722mm) minimum vertical clearance beneath the top surface of the table
•Projects 2.55 inches (65 mm) from the front or rear of the FlipTop chassis beneath the table and requires an additional 0.2inch or5 mm for installation
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/