4K HDMI and USB over HDBaseT Extender

Model: HD-EXT-USB-2000-C

Part #: 6508473

HDBaseT® Certified 4K Ultra HD signal extender
Extends uncompressed digital video, audio, control, and LAN signals over a single CAT type twisted pair cable
Supports cable lengths up to 330ft (100m) depending on the video resolution and wire type
Handles video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
Handles 3D video and Deep Color

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The HD-EXT-USB-2000-C is a point-to-point signal extender for HDMI®, USB 2.0, RS-232, IR, and Ethernet signals. Analog audio input and/or output signals are also supported in combination with HDMI video. The HD-EXT-USB-2000-C is ideal for use with a single HD or UHD display device and USB camera to extend the signal wiring from an AV media source, computer, central equipment cabinet, or Crestron Mercury™ Tabletop Conference System.

The extender is composed of a compact transmitter and receiver pair, which may be installed up to 330ft (100m) apart (depending on the video resolution and wire type). Video, audio, control, and LAN signals are all transported through a single CAT type cable (not included) using HDBaseT® technology.

Note: This product is not addressable from a control system and offers no programmable functionality. Ethernet, USB, CEC, IR, and RS-232 signals are simply passed through. The transmitter and receiver are intended to be used together and are not intended to be interfaced with other HDBaseT equipment.

HDBaseT® Certified 4K Ultra HD signal extender
Extends uncompressed digital video, audio, control, and LAN signals over a single CAT type twisted pair cable
Supports cable lengths up to 330ft (100m) depending on the video resolution and wire type
Handles video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
Handles 3D video and Deep Color
Supports Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
Compatible with HDMI®, DVI, and DisplayPort Multimode sources
Compatible with HDMI and DVI display devices
Includes balanced and unbalanced stereo analog audio input and output
Supports stereo analog audio embedding and de-embedding
HDCP 2.2 compliant
Passes CEC and EDID signals
Extends 10/100 Ethernet, RS-232, and IR control signals
Extends USB 2.0 signals in either direction (mode selectable)
Low-profile surface mount design
Universal 100-240V power pack included
Ideal for use with Crestron Mercury™ systems

Extender Type - HDMI
Extender Type - RS232
Extender Type - USB
Extender Type - Other
Rackmountable - Yes
HDBaseT - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Transmission Range: 330 ft
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Input Impedance: 10000 ohm
Output Impedance: 499 ohm
Total Harmonic Distortion + Noise (THD+N): 0.01 %
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 18.70 Watt
Current Draw: 0.80 Amps
DC Voltage: 24 Volts
Video:
•Input Signal Types (at TX): HDMI with Deep Color, 3D, and 4K (DVI and Dual-Mode DisplayPort compatible)
•Output Signal Types (at RX): HDMI with Deep Color, 3D, and 4K (DVI compatible)
Audio:
•Input Signal Types (at TX): HDMI (Dual-Mode DisplayPort compatible), analog stereo
•Output Signal Types (at RX): HDMI, analog stereo
•Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, LPCM up to 8 channels
•Analog Formats: Stereo 2-channel
•Analog-To-Digital Conversion: 24-bit 48kHz
•Digital-To-Analog Conversion: 24-bit 48kHz
•Analog Performance:
•Frequency Response: 20Hz to 20kHz +/-0.5dB
•S/N Ratio: >95dB, 20Hz to 20kHz A-weighted
•THD+N: <0.005% at 1kHz
•Stereo Separation: >80dB, 20Hz to 20kHz
COMMUNICATIONS:
•Ethernet: 10/100Mbps pass-through
•USB: USB 2.0 pass-through (also supports firmware update via USB mass storage device at TX)
•RS-232: 2-way serial pass-through up to 115.2k baud (TD/RD only)
•IR: Bidirectional IR signal pass-through up to 60kHz
•HDMI: HDCP 2.2, EDID, CEC pass-through
•HDBaseT: HDCP 2.2, EDID, PoE+, Ethernet, IR/RS-232 (intended for signal extension between TX and RX only)
Connectors - Transmitter (HD-TX-USB-2000-C):
•HDMI IN: (1) HDMI Type A connector, female
•HDMI digital video/audio input
• (DVI and Dual-Mode DisplayPort compatible)
•AUDIO IN: (1) 3.5mm TRS mini phone jack and (1) 5-pin 3.5mm detachable terminal block
•Balanced or unbalanced stereo line-level audio input
•Maximum Input Level: 4Vrms balanced, 2Vrms unbalanced
•Input Impedance: 10k Ohms balanced, 5k Ohms unbalanced
•Note: The TRS jack is unbalanced stereo and paralleled with the L+ (tip), R+ (ring), and ground (sleeve) terminals only one audio input connection should be used this input signal supplants the HDMI audio input signal when selected
•USB (host): (1) USB Type A connector, female
•USB 2.0 host port for connection of a mouse, keyboard, or any other USB 2.0 peripheral device
•Passes USB data to/from the USB device port on the RX when in DEVICE mode
•Available Power: 1 Amp at 5VDC
•USB (device): (1) USB Type Micro-B connector, female
•USB 2.0 device port for connection to a computer or any other USB 2.0 host
•Passes USB data to/from the USB host port on the RX when in HOST mode
•LAN: (1) 8-pin RJ45 connector, female
•10Base-T/100Base-TX Ethernet port
•Passes Ethernet data to/from the LAN port on the RX
•COM: (1) 3.5mm TRS mini phone jack and (1) 3-pin 3.5mm detachable terminal block
•Bidirectional RS-232 port
•Passes RS-232 TD/RD data to/from the COM port on the RX
•Supports up to 115.2k baud
•Note: The TRS jack and terminal block are paralleled only one should be used
•IR IN: (1) 3.5mm TS mini phone jack and (1) 2-pin 3.5mm detachable terminal block
•IR input port for connection from a Crestron IR control port or other IR signal source
•Passes IR signal to the IR OUT port on the RX
•Supports IR up to 60 kHz
•Note: The TS jack and terminal block are paralleled only one should be used
•HDBT OUT: (1) 8-pin RJ45 connector, female, shielded
•HDBaseT and PoE Class 3 PD port for connection to the HDBT IN port on the RX
•IR OUT: (1) 3.5mm TS mini phone jack and (1) 2-pin 3.5mm detachable terminal block
•IR output port for connection to an IR emitter
•Passes IR signal from the IR IN port on the RX
•Supports IR up to 60 kHz
•Note: The TS jack and terminal block are paralleled only one should be used
Connectors - Receiver (HD-RX-USB-2000-C):
•HDMI OUT: (1) HDMI Type A connector, female
•HDMI digital video/audio output (DVI compatible)
•AUDIO OUT: (1) 3.5mm TRS mini phone jack and (1) 5-pin 3.5mm detachable terminal block
•Balanced or unbalanced stereo line-level audio output
•Maximum Output Level: 4Vrms balanced, 2Vrms unbalanced
•Output Impedance: 499 Ohms balanced or unbalanced
•Note: The TRS jack is unbalanced stereo and paralleled with the L+ (tip), R+ (ring), and ground (sleeve) terminals
•USB (host): (1) USB Type A connector, female
•USB 2.0 host port for connection of a mouse, keyboard, or any other USB 2.0 peripheral device
•Passes USB data to/from the USB device port on the TX when in HOST mode
•Available Power: 1 Amp at 5 Volts DC
•USB (device): (1) USB Type Micro-B connector, female
•USB 2.0 device port for connection to a computer or any other USB 2.0 host
•Passes USB data to/from the USB host port on the TX when in DEVICE mode
•LAN: (1) 8-pin RJ45 connector, female
•10Base-T/100Base-TX Ethernet port
•Passes Ethernet data to/from the LAN port on the TX
•COM: (1) 3.5mm TRS mini phone jack and (1) 3-pin 3.5mm detachable terminal block
•Bidirectional RS-232 port
•Passes RS-232 TD/RD data to/from the COM port on the TX
•Supports up to 115.2k baud
•Note: The TRS jack and terminal block are paralleled only one should be used
•IR IN: (1) 3.5mm TS mini phone jack and (1) 2-pin 3.5mm detachable terminal block
•IR input port for connection from a Crestron IR control port or other IR signal source
•Passes IR signal to the IR OUT port on the TX
•Supports IR up to 60kHz
•Note: The TS jack and terminal block are paralleled only one should be used
•HDBT IN: (1) 8-pin RJ45 connector, female, shielded
•HDBaseT and PoE+ PSE port for connection to the HDBT OUT port on the TX
•IR OUT: (1) 3.5mm TS mini phone jack and (1) 2-pin 3.5mm detachable terminal block
•IR output port for connection to an IR emitter
•Passes IR signal from the IR IN port on the TX
•Supports IR up to 60kHz
•Note: The TS jack and terminal block are paralleled only one should be used
•24VDC 1.25A: (1) 2.1 x 5.5mm DC power connector
•24 Volt DC power input
•PW-2412WU power pack included
•Note: This connection powers both the receiver and transmitter
Controls and Indicators - Transmitter (HD-TX-USB-2000-C):
•POWER: (1) Bi-color green/amber LED, indicates operating power is supplied via the HDBaseT link to the companion receiver, turns amber while booting and green when operating
•HDMI IN: (1) Green LED, indicates HDMI input signal presence
•LINK: (1) Bi-color green/amber LED, green indicates an HDBaseT link with video, amber indicates a link without video
•AUDIO SEL HDMI/ANALOG: (1) 2-position slide switch, selects the audio input
•RESET: (1) Recessed pushbutton, initiates hardware reset of both the transmitter and receiver
•LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
•HDBT OUT: (2) LEDs, amber LED indicates HDBaseT link status, green LED indicates PoE
Controls and Indicators - Receiver (HD-RX-USB-2000-C):
•POWER: (1) Bi-color green/amber LED, indicates operating power is supplied from the power pack via the 24VDC input, turns amber while booting and green when operating
•HDMI OUT: (1) Green LED, indicates HDMI output signal presence
•LINK: (1) Bi-color green/amber LED, green indicates an HDBaseT link with video, amber indicates a link without video
•HOST/AUTO/DEVICE: (1) 3-position slide switch, selects the USB mode
•LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
•HDBT IN: (2) LEDs, amber LED indicates HDBaseT link status, green LED indicates PoE
Construction - Typical of Transmitter and Receiver:
•Chassis: Metal, black finish, with (2) integral mounting flanges, vented sides
•Mounting: Freestanding, surface mount, or attach to a single rack rail
Dimensions:
•Transmitter (HD-TX-USB-2000-C):
•Height: 4.47 in (114mm)
•Width: 9.61 in (244mm)
•Depth: 0.99 in (25mm)
•Receiver (HD-RX-USB-2000-C):
•Height: 4.47 in (114mm)
•Width: 9.61 in (244mm)
•Depth: 0.99 in (25mm)
•Weight:
•Transmitter (HD-TX-USB-2000-C): 1.71lbs (776g)
•Receiver (HD-RX-USB-2000-C): 1.71lbs (776g)

HD-EXT3-C - 4K HDMI® over HDBaseT® Extender w/IR & RS-232

HD-EXT4-C - 4K HDMI® over HDBaseT® Extender w/Analog Audio

HD-RX-101-C-E - DM Lite HDMI Over CATx Receiver, Surface Mount

HD-RX-4K-410-C-E-SW4 - DM Lite 4K Multiformat 4x1 AV Switch and Receiver with 4-Port Ethernet Switch

HD-RX-4K-510-C-E - 4K Multiformat Switch and Receiver, 3 DM Lite and 2 HDMI Inputs, 1 HDMI Output

HD-RX-4K-510-C-E-SW4 - DM Lite 4K Multiformat 5x1 AV Switch and Receiver with 4-Port Ethernet Switch

HD-RX-USB-2000-C - HDMI Over CATx, 330ft Receiver

HD-TX-101-C-1G-E-B-T - DM Lite HDMI Over CATx Wallplate Transmitter, Black Textured

HD-TX-101-C-1G-E-W-T - DM Lite HDMI Over CATx Wallplate Transmitter, White Textured

HD-TX-101-C-E - DM Lite HDMI Over CATx Transmitter, Surface Mount

HD-TXC-101-C-E - DM Lite HDMI Over CATx Transmitter with IR and RS-232, Surface Mount

HDI-TX-301-C-2G-E-B-T - DM Lite HDMI over CATx Transmitter and 3 x 1 Auto-switcher with 2 HDMI+ VGA and Analog Audio, UK/European Wall Plate, Black Textured

HDI-TX-301-C-2G-E-W-T - DM Lite HDMI over CATx Transmitter and 3 x 1 Auto-switcher with 2 HDMI+ VGA and Analog Audio, UK/European Wall Plate, White Textured

Extender 1066498 kb - Data Sheet

Project List

Extender 552914 kb - Other

Project List