4x2 4K60 4:2:0 AV Switcher
Model: HD-MD402
Part #: 6511676
- 4K60 4:2:0 digital AV switcher
- Four HDMI® inputs
- One mirrored HDMI and DM Lite® output and one independent DM Lite output
- 4K to 1080p downscaling
- EDID management
The HD-MD402 is a 4K60 4:2:0 AV switcher that provides a cost-effective solution for professional AV applications. The HD-MD402 provides four HDMI® inputs, one mirrored HDMI and DM Lite® output, and one independent DM Lite output. The DM Lite outputs extend HDMI signals over a CATx (CAT5e or higher) twisted pair cable. For HD 1080p, WUXGA, and 2K signals, a CATx cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a CATx cable length of up to 130 ft (40 m) is supported.
4K to 1080p Downscaling
The mirrored HDMI and DM Lite output and the independent DM Lite output each have a built-in scaler for downscaling 4K to 1080p signals. Input resolutions are automatically downscaled to 1080p regardless of the resolution capabilities of the display device. If desired, downscaling can be disabled. Input resolutions up to 4K60 4:2:0 are supported.
HDMI Audio De-embedding
Embedded HDMI 2-channel LPCM audio can be extracted from the selected HDMI input and transmitted to the AUX stereo audio output. Mute control is configurable for the mirrored HDMI and DM Lite output, the independent DM Lite output, and the AUX audio output independently. Volume control is only configurable for the AUX audio output.
USB Power Port
A USB power port is included on the HD-MD402 to power USB powered devices (500mA maximum).
Device Control
The COM (RS-232) port can enable the display device to be turned on or off automatically without the use of a control system. The port also enables full programmable control of any device with the use of a control system. An Ethernet port connection to a LAN also provides control by enabling use of the built-in web interface as well as connection to a control system.
Built-In Web Interface
Configuration of the HD-MD402 can be accomplished by using the built-in web interface. The configuration of a single unit can be downloaded to a computer or mobile device and then uploaded to multiple HD-MD402 units to simplify system installation.
- 4K60 4:2:0 digital AV switcher
- Four HDMI® inputs
- One mirrored HDMI and DM Lite® output and one independent DM Lite output
- 4K to 1080p downscaling
- EDID management
- HDCP 2.2 compliance
- HDMI audio de-embedding
- 100BASE-TX Ethernet connectivity
- USB power port
- Device control
- Built-in web interface for easy configuration and monitoring
- Compatibility with Crestron® 3-Series® or later control systems
- .AV Framework™ technology support
- Surface-mountable design
- Universal 100-240VAC power pack included
- Supported Resolution - 1080p (1920x1080)
- Supported Resolution - WQXGA (2560x1600)
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE, IC, FCC Part 15 Class B digital device
- Crosstalk: 90 dB
- Input Impedance: 100 ohm
- Input Signal Types: HDMI with Deep Color, 3D and 4K
- Output Signal Types: HDMI and DM Lite with Deep Color, 3D and 4K60 4:2:0 support
- Signal to Noise Ratio: 95 dB
- Total Harmonic Distortion + Noise (THD+N): 0.01 %
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 26 Watt
- DC Voltage: 24 Volts
- Depth: 6.25 in
- Height: 1.72 in
- Width: 8.66 in
- Product Weight: 2.90 lbs
- Audio - General :
•Digital-to-Analog Conversion: 24-bit 48 kHz
•Stereo Separation: ?80 dB, 20 Hz to 20 kHz - Audio - Source Inputs :
•Input Signal Type: HDMI (Dual-Mode DisplayPort interface compatible)
•Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels - Audio - Digital Output :
•Output Signal Type: HDMI
•Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
•Source: -80 dB to +20 dB adjustment range plus Mute
•Master Volume:-80 dB to +20 dB adjustment range plus Mute - Audio - Analog Line Output :
•Output Signal Type/Format: Stereo 2-channel
•Volume Control: -80 dB to +20 dB adjustment range plus Mute - Communications :
•Ethernet: 100 Mbps, auto-negotiating, auto-discovery, full/half duplex, DHCP, web browser setup and control, Crestron control system integration
•DM Lite: HDCP 2.2 and EDID
•USB: To power a USB powered device
•HDMI: HDCP 2.2 and EDID - Connectors :
•HDMI INPUT 1-4: (4) 19-pin Type A connector, female; HDMI digital video/audio inputs (DVI and Dual-Mode DisplayPort interface compatible)
•HDMI 1 OUTPUT: (1) 19-pin Type A connector, female; HDMI digital video/audio output (DVI compatible); Mirrored with DM LITE 1 output
•DM LITE 1 OUTPUT: (1) Yellow 8-pin RJ-45 connector, female, shielded; DM Lite output port for connection to a DM Lite receiver; Mirrored with HDMI 1 output
•DM LITE 2 OUTPUT: (1) Yellow 8-pin RJ-45 connector, female, shielded; DM Lite output port for connection to a DM Lite receiver
•AUX: (1) 3-pin 3.5 mm detachable terminal block; Unbalanced stereo line-level audio output; Output Impedance: <100 Ohms; Maximum Output Level: 2 Vrms unbalanced
•COM: (1) 3-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Supports RS-232 up to 115.2k baud with hardware and software handshaking;
•Ethernet: (1) 8-pin RJ-45 connector, female; 100BASE-TX Ethernet port
•24V 2.5A: (1) 2.1 x 9.5 mm DC power connector; 24VDC power input; PW-2420RU power pack (included)
•SERVICE: (1) USB Type A female; Provide up to 5V 500mA power to USB powered device - Controls and Indicators :
•INPUT 1-4: (4) Push buttons for manual input selection and (4) LEDs. Green indicates that the corresponding input is routed to an output. Amber indicates that a source is detected at the corresponding input but is not routed to an output.
•OUTPUT 1-2: (2) Push buttons for manual output selection and (2) LEDs. Green indicates that a display or other destination device is detected and the corresponding output is transmitting video. Amber indicates that a display or other destination device is detected but no video is routed to the corresponding output.
•SETUP: (1) Red LED and (1) push button for display of IP address on connected HDMI and DM Lite outputs
•Ethernet: (2) LEDs on RJ-45 connector; Green indicates that a 100BASE-TX link is established. Flashing amber indicates Ethernet activity.
•DM LITE 1-2: (2) LEDs on RJ-45 connector; Green indicates that a DM Lite link is established. Flashing amber indicates non-HDCP video. Solid amber indicates HDCP video.
•PWR: (1) LED. Amber indicates that the device is booting. Green indicates that the device is operational. - Environmental :
•Humidity: 10% to 90% RH (non-condensing)
•Heat Dissipation: 89 BTU/hr typical
•Acoustic Noise: Not applicable (fanless) - Construction :
•Chassis: Metal, black finish, vented top and bottom
•Mounting: Surface-mountable - Video :
•Switcher: 4x2 manual switching, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technologies
• Copy Protection: HDCP 2.2
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/