Horizon® 2 In-Wall Forward-Phase Dimmer with infiNET EX® Wireless Communication, 120 VAC, Custom Engraved, Almond

The HZ2-DIMEX is a Horizon® 2 in-wall forward phase dimmer that provides infiNET EX® wireless network control of ballasts and drivers. It has the ability to adjust minimum and maximum light levels and to set the dimming curve to be linear, logarithmic, or use a custom curve. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations.

Default engraving on a rocker button assembly (Style 6) is provided with the HZ2-DIMEX-A, HZ2-DIMEX-W, and HZ2-DIMEX-B. The default engraving includes a simple dot to provide feedback and indicate where the button can be pressed.

NOTE: Faceplates are not included. Refer to the HZ2-FP-G series faceplates for more information.

Integrated Keypad

Supporting up to five buttons in six available button configurations, the HZ2-DIMEX is configurable for a variety of applications. Because the device is attached to the Crestron® network, it can function as a keypad to trigger remote actions.

Button Engraving

Custom laser-etched engraving is used to identify the functionality of each button on the button assembly. When a custom engraved model is ordered, the engraved button assembly is installed on the device before it is shipped. Create engraving files using Impress, the Crestron Home Setup app, the Crestron Home Online Configurator, or D3Pro.

If the engraving or button assembly has not been finalized before an order is placed, default engravings can be replaced with custom engravings by sending an engraving file toorders@crestron.com before the order ships. If the updated engraving order maintains the same product types and quantities as the original order, it will be processed in the order that it was originally received.

To order replacement engravings, refer to the HZ2-BTNS ENGRAVED button assembly product page.

Button assemblies without engravings (BLANK models) are available separately and can be used as-is or custom engraved by a third-party engraver.

Note: Devices ordered with custom engraving (ENGRAVED models) are provided with the button assembly indicated on the engraving order. The button assembly is installed prior to shipment and replaces the default button assembly with default engraving.