Zum Outdoor Wireless Dimmer - NEMA Mount
Model: ZUMMESH-OD-7P
- Uses Zum® Outdoor self-forming and self-restoring wireless mesh network
- Remote control, scheduling, and sensor configuration
- In-node scheduling: custom schedules are programmed to the node, with RTC (Remote Time Clock) built into each controller, schedules run with or without wireless connectivity
- Built-in power monitoring
- Sensor inputs for motion or light sensing
The ZUMMESH-OD-7P is a wireless network-connected lighting controller with dimming, energy-metering, remote monitoring and management, and sensor input capabilities. A single ZUMMESH-OD-7P has sensor inputs for both occupancy and daylight sensors and can provide 12VDC power to the sensors. It has 4kV fault tolerance and control persistency. The status and health of the light fixtures are continuously monitored. The 7-pin (ANSI 136-41) dimming (NEMA) receptacles provide for a quick and simple installation.
Zum® Outdoor Wireless Mesh Network
Zum outdoor wireless mesh technology provides peer-to-peer RF communications within a commercial space without the need for physical control wiring, hubs, or gateways. Zum mesh outdoor devices act as routing nodes to relay wireless commands between them without disruption. Adding Zum mesh devices to a space increases the range and stability of the peer-to-peer mesh network by providing multiple redundant signal paths. Each Zum mesh device autonegotiates its RF channel to provide robust communication.
Self-Forming and Self-Restoring Wireless Mesh Network
Zum outdoor wireless mesh technology auto-searches and establishes connections in a network. If a wireless connection in the network is broken, the Zum mesh device will disable the path and reroute the data to ensure seamless communication. Once the device is restored, the Zum device will automatically rejoin the network.
Built-in Power Monitoring
Power monitoring tracks the real time energy usage of each node in the system to help control energy costs. By analyzing real data, organizations can make more educated decisions regarding the energy usage.
Daylight and Motion Sensor Inputs
Daylight and Motion Sensor inputs enable the use of hardwired occupancy and daylight sensors with a Zum commercial lighting system. The sensor enables the use of ultrasonic and dual-technology type sensors for outdoors. One or more motion-detecting sensors can be connected and configured to operate in either occupancy or vacancy-only mode. A single photocell can also be connected to support daylight harvesting.
Linear Continuous Dimming - High-Resolution Dimming (100+ steps)
Linear continuous dimming provides one channel of dimming for commercial lighting applications. Supports a continuous dimming range of 1% to 100%.
- Uses Zum® Outdoor self-forming and self-restoring wireless mesh network
- Remote control, scheduling, and sensor configuration
- In-node scheduling: custom schedules are programmed to the node, with RTC (Remote Time Clock) built into each controller, schedules run with or without wireless connectivity
- Built-in power monitoring
- Sensor inputs for motion or light sensing
- Linear continuous dimming - high resolution dimming (100+ steps)
- Optional built-in photocell to report daylight levels (-DLS models only)
- Reliable and encrypted communication
- Supports over-the-air (OTA) firmware updates
- Flexible event-based scheduling system
- Lighting fixture fault monitoring and reporting
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): -40 F
- Certifications: FCC, DLC
- AC Voltage (Maximum): 277 Volts
- AC Voltage (Minimum): 120 Volts
- Depth: 4.60 in
- Height: 2.50 in
- Width: 4.60 in
- Product Weight: 0.84 lbs
- Sustainability Rating: IP67
- Load Control:
•Dimming Output: (1) 0-10V, 20mA
•Max Load Current: 277VAC Models: 10A 480VAC Models: 5A
•Surge Protection (Controller only): 4kV (Lighting load protection provided by lighting load's circuit breaker) - Wireless Communications :
•RF Transceiver: Zum Outdoor wireless, 2-way RF, 2.4 Ghz
•Topology: Mesh topology
•Device Type: Node; Routes data between nodes and gateway
•Coverage Range (typical): Gateway to Node: 2,000 ft (610 m); Node to Node: 2,000 ft (610 m) Maximum of 10 hops on the mesh network between the Gateway and the last node - Connections: 7-Pin Connector: (1) 7-pin NEMA connector; Connects to ANSI 136-41 receptacle; Load: Load, Red wire; L: Line, Black wire; N: Neutral, White wire; Pin 1: Dimming -, Gray wire; Pin 2: Dimming +, Violet wire; Pin 3: Sensor input, Orange wire; Pin 4: Sensor Input, Brown wire
- Humidity: 5% to 95% RH (noncondensing)
- Construction: Material: Plastic, Mounting: NEMA-rated 7-pin
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/