Network Equipment : Network Security Software : Datapath Ltd. - Aetria Network Manager

Aetria Network Manager Appliance Simplifies the Setup and Management of Aetria Solutions

Model: Aetria Network Manager

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The Aetria Network Manager appliance simplifies the setup and management of Aetria solutions. The Aetria Network Manager appliance is provided pre-configured with Aetria Command Center software, requiring only power and a connection to the network to get started.

Required Computer Operating Systems - Other
Spec Sheet available - Yes

Storage: 1TB 7.2K RPM SATA 6Gbps 512n 3.5in Hot-plug HDD
Supported System: Datapath Aetria Network Manager & Command Center
Browser Access: Safari, Edge, Chrome
Security: HTTPS, TLS, TPM1.2/2.0, SecureBoot, Cryptographically signed firmware. Silicon root of trust.
Ethernet: 2x100/1000Mbps full/half duplex
I/O & Ports: 1 x front panel USB 2.0, 2 x USB 3.0 real panel, 1x IDRAC, VGA, serial connector
Power Supply: Dual hot plug redundant PSU 350W
Chassis Dimensions: Width: 434mm, Depth: 595mm
Environmental Humidity: 5-95% with 33 °C dew point, non-condensing
Environmental Shock: Six consecutively executed pulses in positive and negative x,y,z planes each side of the system of 71G for up to 2ms
Environmental Vibration: 1.88 Grms at 10-500Hz for 15min
Operating Humidity: 10-80% RH with 29 °C dew point, non-condensing
Operating Shock: One pulse each side of the system of 71G for up to 2ms
Operating Vibration: 1.88 Grms at 10-500Hz for 15min
Certifications: CE, CB, UL, EAC, CCC, BIS, FCC
Memory (RAM) Required: 8 GB
Required Processor (CPU) Speed: 3.4GHz
Required Processor Type: Xeon CPU-2224 3.4GHz
Product Weight: 29.98 lbs
Noise: 38 dB

Aetria Command Center - Aetria Command Center, Comprehensive and Unified Interface

Aetria Workstation - Aetria Workstation Empowering the Control Room Operator

Aetria 2534832 kb - Data Sheet

Project List