Cables & Connectors : Connectors : Datapath Ltd. - DPextend20

DisplayPort Signal Extender Module, plus 20m Powered DisplayPort Cable

Model: DPextend20

Supports all DisplayPort 1.1a resolutions up to 2560x1600 (up to 385Mpixels/sec)
Connects two DisplayPort cables each up to 20m in length to provide a total cable run of up to 40m
Powered from the Datapath ImageDP4 video graphics card
Supports HDCP
Full latching DisplayPort connectors

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Datapath DPextend module allows the DisplayPort outputs of the Datapath ImageDP4 video graphics card to drive resolutions of up to 2560x1600x60Hz over 40m into a native DisplayPort monitor.

The compact DPextend module sits securely in the middle of the cable run, using full-sized, locking DisplayPort connectors, and intelligently boosts and equalises the DisplayPort signals to extend the cable length. Using high quality Datapath supplied DisplayPort cables, the DPextend can support 20m cables on both input and output ports, giving a cable reach of 40m for added flexibility in multi-screen system solutions.

The DPextend is entirely powered from the ImageDP4 graphics card output connectors, provided that Datapath DisplayPort cables are used. The DPextend also compensates for voltage losses in the cables to allow it to additionally forward power to a DPadapt module for ultimate conversion to DVI.

Supports all DisplayPort 1.1a resolutions up to 2560x1600 (up to 385Mpixels/sec)
Connects two DisplayPort cables each up to 20m in length to provide a total cable run of up to 40m
Powered from the Datapath ImageDP4 video graphics card
Supports HDCP
Full latching DisplayPort connectors

Connector Product Type - Video
Spec Sheet available - Yes

Active Power: 0.40 Watt
Height: 1.97 in
Width: 2.20 in

1DPextend_DPadapt_Datasheet.pdf 597 kb - Data Sheet

Project List