Bodypack Set, Cardioid Mic 653-663 MHz

Model: RE3-BPCL-6M

RE3-ACC-CL3:
Ideal for general sound reinforcement and
presentations
Cardioid polar pattern rejects ambient sounds and increases gain before feedback
Delivers full and accurate sound

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Bodypack UHF wireless set featuring CL3 cardioid lavalier microphone for voice performance and presentations. The CL3 a robust, general-purpose lavalier microphone. It is ideal for presentation and public speaking where its full and accurate sonic characteristics, coupled with its feedback-rejecting cardioid polar pattern deliver a clear and intelligible voice.

Setup is quick and simple using the RE3 clear frequency scan and sync functions, and the radio link between the robust bodypack transmitter and diversity receiver delivers rock-solid system performance.

RE3-ACC-CL3:
Ideal for general sound reinforcement and
presentations
Cardioid polar pattern rejects ambient sounds and increases gain before feedback
Delivers full and accurate sound
Wide dynamic range and frequency response
Clothing clip holds microphone securely and attaches easily to garments
RE3-BPT:
Robust metal body
Up to 36 MHz tuning bandwidth (band specific)
Selectable low and high output power (band specific)
Unique magnetic latch and lock for easy access to batteries
Sync function for easy frequency setup
RE3-RX:
Diversity reception minimizes dropouts
Up to 36 MHz tuning bandwidth (band specific) for trouble-free operation
Easy-to-read LCD display
Frequency scanning for selecting open frequencies
Sync function links transmitter to receiver for easy setup
Includes:
CL3 Cardioid Lavalier Microphone
RE3-BPT Bodypack Transmitter
RE3-RX Diversity Receiver

Spec Sheet available - Yes
Spec Sheet available - Yes
Spec Sheet available - Yes

RE3-ACC-CL3:
•Element type: Self-biased condenser
•Frequency response: 100 Hz - 15 kHz
•Polar pattern: Cardioid
•Sensitivity: open circuit voltage. 1 kHz: 20 mV/Pascal (-34 dBV/PA)
•Maximum SPL: 115 dB SPL
•Impedance: 3700 ohms
•Power requirements: 3-9 VDC
•Polarity: Positive pressure on diaphragm produces positive voltage at pin 2 relative to pin 1
•Electrical contact pinouts: Pin #1 - Ground, shield; Pin #2 – Audio; Pin #3 - Bias voltage; Pin #4 - N/C
•Dimensions (cable length) : 56.3" (1430 mm)
•Dimensions (head length) : 1.04" (26.4 mm)
•Dimensions (head diameter) : 0.4" (10.1 mm)
•Net weight: 0.758 oz (21.5 g)
•Shipping weight: 6.35 oz (180 g)
•Microphone connector: 4-pin mini plug
•Head finish: Non-reflecting black
•Material: Die cast aluminum, steel wire cloth grille, black flexible PVC cable
RE3-BPT:
•Frequency oscillation mode: Phase-locked loop (PLL)
•Sync frequency: Ultrasonic
•RF power output: 6M (653-663MHz): Low 10mW/High 20mW
•Display by: LCD + LED
•Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock
•RF stability: <±10kHz at Fc
•Modulation frequency shift: Wideband FM ±48kHz deviation
•Harmonic radiation: <-50dBc
•Input jack: 4-pin mini jack
•Battery: 2 x AA alkaline battery or NiMH rechargeable battery
•Charging contacts: Yes
•Finish: Black polyurethane paint
•Dimensions (without antenna): Height: 3.2 in. (81.5mm); Width: 2.54 in. (64.5mm); Depth: 0.98 in. (25mm)
•Net weight: 6.14 oz. (0.174 kg)
•Gross weight: 8.29 oz. (0.235 kg)
RE3-RX:
•Frequency oscillation mode: Phase-locked loop (PLL)
•Carrier frequency range: 470 - 865 MHz (tuning bandwidth is band dependent) Band names, tuning bandwidths, and carrier
•Sync frequency: Ultrasonic 40 kHz
•Diversity: Antenna diversity
•Bandwidth: 36MHz
•Signal/Noise ratio: >100dB(A)
•Total harmonic distortion (Thd): <0.6% at 1kHz
•Receiving sensitivity: -81dBm for -12dB SINAD
•Frequency response: 63Hz~16kHz±2dB (BPT) 51Hz~16kHz±2dB (HHT)
•Antenna type: Detachable ½ wave with BNC connector
•Antenna booster power: DC12 - 15V/100mA
•Function display by: LCD
•Contents of display: Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator
•Sync data options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch)
•Audio frequency output level: Ref: 22.5kHz Dev at 1kHz Tone
•1/4 inch(6.3mm) Phone Jack: -10dBV XLR
•Jack: -4dBV(Line), -24dBV(MIC)
•Audio frequency output impedance: 240OHMS (unbalanced) 1400OHMS (balanced)
•Squelch and noise muting: Noise muting and tone code locking
•Output ports: 1 x balanced XLRM jack, 1 x unbalanced 1/4 inch TS (6.3mm) jack
•Power supply: DC12~15V/500mA
•Finish: Black polyurethane paint
•Dimensions: Width: 8.27 in. (210mm); Height: (with feet attached) 1.85 in. (47mm); Height: (without feet attached) 1.73 in. (44mm); Depth: (including antenna jack) 6.89 in. (175mm); Depth: (not including antenna jack) 6.1 in. (155mm)
•Net weight: 2.71 lb (1.23 kg)
•Gross weight: 3.28 lb (1.49 kg)

UHF wireless set 1067652 kb - Data Sheet

Project List

UHF wireless set 1276624 kb - Data Sheet

Project List

UHF wireless set 1224267 kb - Data Sheet

Project List