The FSR CDA-2EQ is a high resolution 1 X 2 Distribution Amplifier designed to satisfy a typical application where a local monitor and a remote display device require a long cable run. The remote output is equalized to maintain excellent signal integrity for even the highest video resolutions. Cable runs of up to 175’ are possible with 170 MHz of full amplitude bandwidth and +/- 0.4dB flatness to a 150 MHz. A half amplitude signal yields 270 MHz of bandwidth and +/- 0.4dB flatness to 235 MHz, nearly 16 times better than cable alone. This means that the signal that you feed into the CDA-2EQA will arrive at the far end of the cable with an almost immeasurable amount of loss and no distortion due to peaking effects. The local monitor output passes ID bits to the host computer to maintain compatibility with Mac and Windows based computers. The CDA-2EQA incorporates a mini stereo input jack on the front and a 5 position pluggable captive screw terminal on the back for balanced stereo audio output. An active audio balancing circuit ensures long, noise free stereo audio cable runs from the point of installation to the house sound system.