High resolution 1 x 2 Distribution Amplifiers are designed to satisfy typical applications requiring a local monitor and a remote display device with a long cable run. Local monitor output is fully buffered by an independent amplifier stage to eliminate interaction with the remote output. The remote output is buffered and equalized to maintain excellent signal integrity with even the highest video resolutions. This means that the signal that feed into arrive at the far end of the cable with an almost immeasurable amount of loss. The remote output sync circuitry provides a termination option switch to help overcome display jitter and image loss associated with improper sync termination. Image jitter and loss problems are infrequent, but unpredictable and frustrating issues that result from differences in VGA cable construction and display input termination. To ensure installed system compatibility, can obtain EDID display information data from either the local (default setting) or remote monitor by setting the internal jumpers. Models employ a green automatic power down feature that reduces standby power consumption to less than 50mW, a reduction of over 95%. This mode can be disabled in applications where a horizontal sync signal is not present to support this feature.