Signal Processing Systems : Receivers & Transmitters : Hall Technologies - DSCV-70-RX

HDBaseT 2.0 Receiver with USB and Audio De-embedding

Model: DSCV-70-RX

Simple and cost-effective HDBT 2.0 receiver.
HDMI 1.4 with 4K at 60Hz (chroma sub-sampling 4:2:0 8-bit only) and HDCP 2.2 compliant.
Transmits 4K at 60Hz (YUV 4:2:0) signal up to 40m/131ft and 1080P at 60Hz signal up to 70m/230ft via a Cat 6a/7 cable.
Transmits 4K at 60Hz (YUV 4:2:0) signal up to 35m/115ft and 1080P at 60Hz signal up to
60m/197ft via a Cat 5e/6 cable.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

This product is an HDBT 2.0 receiver that is designed to work with an HDBT wall plate transmitter, reliably extending UHD video, multi-channel audio, USB 2.0, RS232 signal and power up to 40m/131ft using a single Cat 5e/6/6a/7 cable. With PSE module built-in, it can supply power to the transmitter with PD module via a single power supply.

It supports USB 2.0 pass-through, providing a solution for users who need remote control of PC resources sources such as keyboard, mouse, interactive display, or USB streaming devices over distance. The RS232 port allows bi-directional RS232 serial communication and firmware upgrade, the functions can be set via DIP switch.

Simple and cost-effective HDBT 2.0 receiver.
HDMI 1.4 with 4K at 60Hz (chroma sub-sampling 4:2:0 8-bit only) and HDCP 2.2 compliant.
Transmits 4K at 60Hz (YUV 4:2:0) signal up to 40m/131ft and 1080P at 60Hz signal up to 70m/230ft via a Cat 6a/7 cable.
Transmits 4K at 60Hz (YUV 4:2:0) signal up to 35m/115ft and 1080P at 60Hz signal up to
60m/197ft via a Cat 5e/6 cable.
Supports analog audio pass-through from transmitter to receiver.
Supports analog audio de-embedding for HDMI output.
High-speed USB 2.0 pass-through over HDBT.
Provide two high-current USB device ports to connect high-power USB device.
Supports bi-directional RS232 serial communication to control a wall plate transmitter when paired with the wall-plate transmitter.
Supports firmware upgrade through the RS232 port.
Built-in PSE to power remote HDBT Wall plate transmitter with PD module.
Includes:
1 x Receiver
1 x DC 12V Power Adapter with US, UK, EU, AU Pins
1 x Phoenix Male Connector (3.5mm, 3 Pins)
2 x Mounting Brackets (with Screws)
1 x User Manual

Receiver/Transmitter Format Type - HDMI
ROHS Compliant - Yes

DC Voltage: 12 Volts
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Certifications: CE, FCC
Active Power: 8 Watt
Current Draw: 3 Amps
Depth: 3.55 in
Height: 0.98 in
Width: 8.27 in
Product Weight: 1.01 lbs
Input/Output Port: 1 x HDBT IN, 1 x HDMI OUT, 1 x RS232, 2 x AUDIO OUT (One for De-embed and another one for Pass-through), 4 x USB DEVICE, 1 x DC 12V IN
Input Signal Type: HDBT 2.0
Output Signal Type: HDMI with 4K at 60Hz 4:2:0 8 bit, HDCP 2.2
Input/Output Resolution Supported: VESA: 800x6008, 1024x7688, 1280x7688, 1280x8008, 1360x7688, 1366x7688, 1440x9008, 1600x9008, 1600x12008, 1680x10508, 1920x12008; SMPTE: 1280x720P1,2,3,4,5,6,7,8, 1920x1080I6,8, 1920x1080P1,2,3,4,5,6,7,8, 3840x21602,3,5,6,8, 4096x21602,3,5,6,8; 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz
Maximum Pixel Clock: 340MHz
Audio Format: HDMI OUT: Supports multi-channel audio formats, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X; AUDIO OUT: Stereo
Storage Temperature: -20 to 70 °C (-4 to 158 °F)
Humidity: 10% to 90%, non-condensing
ESD Protection: Human-body Model: +/-8kV (Air-gap discharge)/+/-4kV (Contact discharge)

Receiver 2096563 kb - Other

Project List

Suggested Products

HDBT Set, HDMI 4K60, USB2.0, Aud, Tx-WP+ Rx-Box

by Covid, Inc.

Transmitter OMNEO

by Bosch Conferencing and Public Address Systems

Transmitter/Receiver w/Bluetooth 4.1 Wireless Technology

by Vanco International