Signal Routing / Switching : Switchers : Key Digital Systems - KD-IP922DEC

KD-IP922DEC

Model: KD-IP922DEC

Enterprise AV Over IP: Utilizes a managed gigabit network switch to enable video distribution, matrix switching, and extension
Video Wall Processing:Encoder + Decoder systems create video walls with up to 8V and 8H monitors
HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
Signal Extension: Up to 330 ft. / 100 m @ 4K 24/25/30(4:4:4)/60(4:2:0) into network switch or or point-to-point

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Key Digital’s Enterprise AV™ over IP Encoders and Decoders create expandable HDMI over IP systems
that can be scaled to fit any commercial installation, and offer variety of Usage Modes

Enterprise AV Over IP: Utilizes a managed gigabit network switch to enable video distribution, matrix switching, and extension
Video Wall Processing:Encoder + Decoder systems create video walls with up to 8V and 8H monitors
HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
Signal Extension: Up to 330 ft. / 100 m @ 4K 24/25/30(4:4:4)/60(4:2:0) into network switch or or point-to-point
Power over Ethernet: Does not require power supply when integrated with compatible PoE network switch
Dual LAN: Enable system expansion beyond a 48 port system
Redundant Power Supply: Added reliability for non-PoE integration
Audio De-Embedding: Audio from the HDMI input is de-embedded through Analog L/R Balanced/Unbalanced
phoenix terminal to enable external audio connectivity with audio distribution systems and amplifiers
Audio DSP: Volume, muting, 3-band EQ, and lip-sync delay controllable on audio de-embed port
Local HDMI Input: Enables viewing of local or distributed HDMI source
HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology
such as 4K/UHD 4:2:0/8bit at 60 f/s
Control: 3 multi-function ports controllable via KeyCode open API, as Compass Control® master controller,
or as control extension via IP
EDID Control: Internal library features 15 default EDID configurations and native EDID data from
Output/Display devices connected to Decoder
Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display,
EDID Control handshake, and Hot Plug control
Dual USB 2.0: Support synchronous and isochronous connections
IR Sensor: Sensor powering via +5V IR In port collects line-of-sight IR from remote(s) without external IR connecting block
Up/Down IR: Two channels of IR enable control to/from devices connected to Encoder and Decoder units
RS-232: Bi-Directional control to/from Encoder and Decoder unit on Phoenix connector
RS-232/TCP-IP Control Mode: Provides control of unit as well as connectivity status
Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
Control System Support: Controllable by all IR, RS-232 & TCP/IP supported control systems via open API: Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
Key Digital® App Ready: Can be controlled over TCP/IP via Key Digital® iOS App
I2C Communication: EDID and HDCP authentication to Display and Source
Latency: <40ms at 4K. Less at lower resolution.
Data Stream Bandwidth: < 900Mbps

Spec Sheet available - Yes

KD-IP922DEC_CatalogPage.pdf 1179995 kb - Data Sheet

Project List

Suggested Products

HDMI 4K 4x1 Multiview Selector Switch and KVM USB Control

by Vanco International

HDMI 4x1 Selector Switch 4K/60Hz HDR HDCP 2.2, IR Routing

by Vanco International

4K 4×1 Multi-Format Wireless Collaboration Switcher with Wired and Wireless Connectivity

by Vanco International