Signal Routing / Switching : Switchers : Key Digital Systems - KD-PS42

4K/18G Presentation Switcher

Model: KD-PS42

Presentation Switcher Kit: Includes KD-PS42 and KD-X40MRx. Add KD-X2x1WDTx wall plate HDBaseT transmitter for plug-in on walls, floor and table boxes
Presentation Switching: 3 HDMI, 1 HDBaseT source selection by push button, IP, RS-232, IR, auto switching, or trigger control
Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected source when enabled
CEC Manager™: Power, volume, and muting controls of the connected display/projector without any additional control wiring. Selection of desired CEC command recipient

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

4K/18G presentation switcher with 4 inputs (HDBT, 3x HDMI), 2 mirrored outputs (HDBT, HDMI), audio de-embed, IR, RS-232, IP, CEC Manager™. Includes Rx.

Presentation Switcher Kit: Includes KD-PS42 and KD-X40MRx. Add KD-X2x1WDTx wall plate HDBaseT transmitter for plug-in on walls, floor and table boxes
Presentation Switching: 3 HDMI, 1 HDBaseT source selection by push button, IP, RS-232, IR, auto switching, or trigger control
Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected source when enabled
CEC Manager™: Power, volume, and muting controls of the connected display/projector without any additional control wiring. Selection of desired CEC command recipient
KD-App Ready: Network scan and detect populates pre-built GUI including connected display/projector controls via CEC Manager™
Audio De-embedding: Audio of the selected source is de-embedded at the unit’s analog L/R balanced/unbalanced and PCM digital audio connectors
KD-AMP220 Control Mode: Command forward to KD-AMP220 for an all-in-one user-friendly control UI of video switching, audio and speech enforcement
HDCP Licensing: Fully licensed and compatible with HDCP 2.2
HDR10 and Dolby Vision: More life-like images through a greater range of luminance levels
Power Over HDBaseT: Rx unit (included) and wall plate Tx unit (sold separately) powered by KD-PS42
Installation: Half-rack width with rack mounting ears included
Signal Extension: For resolution and cable quality
4K/UHD (18G): Up to 40m / 131ft
1080p: Up to 70m / 230ft
Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source and display, EDID Control handshake, and Hot Plug Detection Voltage
EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the Rx display/device
RS-232: Bi-Directional control to/from Tx and Rx/Presentation Switch unit
Unit Control Mode: Provides TCP/IP and RS-232 control and status of/from Tx unit
Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
Control System Support: Fully controllable by all TCP/IP and RS-232 supported control systems via open API: Compass Control® Pro, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc

ROHS Compliant - Yes
Switcher Connector Type - HDMI
Switcher Type - Audio
Warranty - Yes
Spec Sheet available - Yes

Certifications: CE, WEEE, EAC
Number of Inputs: 4
Color: Black
Warranty (Length/Type): 3 Years
Number of Outputs: 2

Switcher 921785 kb - Data Sheet

Project List

Suggested Products

HDMI 4K 4x1 Multiview Selector Switch and KVM USB Control

by Vanco International

HDMI 6x1 Selector Switch/Scaler 1080p (Inputs: 4-HDMI, 2-VGA Output: HDMI, Audio Breakout, RS232, IR)

by Vanco International

4K 4×1 Multi-Format Wireless Collaboration Switcher with Wired and Wireless Connectivity

by Vanco International