Pro AV Catalog
Request Quote
All Products

Power over HDBaseT/HDMI via Single CAT5e/6 4K Extender with HDR10, HDCP2.2

Model: KD-X222PO

  • HDBaseT via Single CAT5e/6 UTP/STP Extension - With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • KD-X222PO - Power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
  • Signal Extension:
  • Up to 150ft at 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
  • Up to 125ft at 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling
Compare
Project List
Product Info
Tech Specs
Documents
The KD-X222PO HDBaseT/HDMI (Tx and Rx) extender is an HDCP 2.2 compliant product that extend 4K/UHD 24/25/30 (4:4:4) and 4K/UHD 60 (4:2:0) signals up to 150ft. using Key Digital® KD-CAT6STP1X Super CAT6A shielded cable, or up to 125ft. using a single third-party CAT5e/6 cable. 1080p/60, 1920x1200, 3D signals are extended up to 250ft. via single Key Digital® KD-CAT6STP1X Super CAT6 shielded cable or up to 230ft. using a single third-party CAT5e/6 cable. In addition to HDMI video and audio signals, X222PO carries IR or RS-232 for controlling remotely located equipment or the RS-232 port can be used to control the X222PO.
  • HDBaseT via Single CAT5e/6 UTP/STP Extension - With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • KD-X222PO - Power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
  • Signal Extension:
  • Up to 150ft at 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
  • Up to 125ft at 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling
  • Up to 250ft at 1080p /1920x1200 using KD-CAT6STP1X cabling
  • Up to 230ft at 1080p /1920x1200 using third-party CAT5e/6 cabling
  • HDCP 2.2 - Compliancy up to HDCP 2.2 and backward compliant
  • HDR10 (High Dynamic Range) - More life-like images through a greater range of luminance levels
  • 4K/Ultra HD Resolution - Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
  • Deep Color Support - Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
  • 3D - Support for standard 3D stereoscopic signal formats
  • Low Profile - Super slim chassis design
  • HDMI® and HDCP Licensing - Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
  • EDID Control - Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
  • Hot Plug Detection Control - Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer Systemâ„¢ - Manages TMDS re-clocking/signal re-generation, HDCP authentication with source and display, EDID control handshake, and hot plug control
  • IR Sensor - Sensor powering via +5V on Rx unit’s IR in port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR - two channels of IR enable control to/from devices connected to Tx and Rx units
  • RS-232 - Bi-Directional control to/from Tx and Rx unit on Phoenix connector
  • Rotary Switch RS-232 Control Mode - provides control of Tx unit as well as connectivity status
  • Lossless compressed digital audio - Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audioâ„¢
  • CEC Support - For inter-device control between input and output HDMI channel
  • I2C Communication - EDID and HDCP authentication to display and source
  • Control System Support - fully controllable by all RS-232 supported control systems via open API compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc
 
Request Quote
 

Suggested Products

Shopping Basket