Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4K/18G HDBT POH Extender
Model: KD-X444S
- HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
- 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx
- Low Profile: Super slim chassis design
- Signal Extension: For resolution and cable quality
Product Info
Tech Specs
Documents
The KD-X444S is a 4K/18G HDBT POH Extenders (Includes KIT Tx/Rx 4K/40meters 1080P/70meters).
- HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
- 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx
- Low Profile: Super slim chassis design
- Signal Extension: For resolution and cable quality
- 4K/UHD: 125ft. (40m) maximum »» 1080p: 230 ft. (70m) maximum
- HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
- HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
- Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
- EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx
- Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source and display, EDID Control handshake, and Hot Plug Detection control
- IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
- Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
- RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
- Unit Control Mode: Provides control of Tx unit as well as connectivity status
- Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
- CEC Pass-thru: For inter-device control between input and output HDMI channel
- Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control® Pro, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc
- Extender Type - HDMI
- Extender Type - RS232
- Warranty - Yes
- Spec Sheet available - Yes
- Certifications: CE, WEEE, EAC
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 20 Watt
- Current Draw: 66 Amps
- DC Voltage: 12 Volts
- Depth: 4.10 in
- Height: 0.88 in
- Width: 2.80 in
- Product Weight: 0.75 lbs
- Color: Black
- Warranty (Length/Type): 3 Years
Extenders
366584 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Key Digital Systems
Model: KD-X444S
Request more information from a dealer near you
close
Request more information from a dealer near you