DigitalinxIP 2100 Series AV/IP Encoder

Model: IPEX2101

Transmits HDMI video and audio over 1Gb network infrastructure using H.264 AVC encoding with a data rate up to 30 Mbps
Supports video signals up to 1080p at 60 Hz
An analog audio output port de-embeds the audio from the HDMI content, while still streaming the audio with the video content
Support video wall configurations
Operate 3rd party devices via RS232

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The DigitalinxIP IPEX2101 encodes/transmits HDMI video and audio over a 1Gb network infrastructure using h.264 AVC encoding with a configurable data rate up to 30 Mbps. The IPEX2101 supports video signals up to 1080p at 60 Hz. An analog audio output port de-embeds 2 channel stereo audio from the embedded HDMI content.

The IPEX2101 supports PoE and can be powered remotely by compatible power source equipment, such as a PoE Ethernet switch, eliminating the need for a nearby power outlet. The RS232 port operates in a pass-through capacity to control a third party device such as an A/V switcher or other device.

Transmits HDMI video and audio over 1Gb network infrastructure using H.264 AVC encoding with a data rate up to 30 Mbps
Supports video signals up to 1080p at 60 Hz
An analog audio output port de-embeds the audio from the HDMI content, while still streaming the audio with the video content
Support video wall configurations
Operate 3rd party devices via RS232
Device supports PoE
Applications:
Video Distribution, Digital Signage, Restaurant, Bar, Entertainment, Hospitality
Large Scale HDMI distribution
Video Wall
Includes:
Installation Guide
Power Supply with US, UK, EU, and AU adapters
3-pin Removable Screw Terminal (2 ea)
Mounting Ears (2 ea)

AV-over-IP - Yes
Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: FCC, CE
Active Power: 6 Watt
Current Draw: 1 Amps
DC Voltage: 12 Volts
Depth: 6.90 in
Height: 0.98 in
Width: 3.90 in
Color: Black
Warranty (Length/Type): 5 Years
HDMI Input: One (1) HDMI Type A Receptacle
LAN: One (1) 8P8C port (Shielded RJ45)
Power: One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
RS232 port: One (1) 3-pin Removable Terminal Block Connector
Audio Output: One (1) 3-pin Removable Terminal Block Connector
Input Video Resolution Support: 640 x 480 at 60Hz, 480p at 60Hz, 576i at 50Hz, 576P at 50Hz, 800 x 600 at 60Hz, 1024 x 768 at 60Hz, 720p at 50Hz, 720p at 60Hz, 1280 x 800 at 60Hz, 1280 x 1024 at 60Hz, 1360 x 768 at 60Hz, 1366 x 768 at 60Hz, 1400 x 1050 at 60Hz, 1440 x 900 at 60Hz, 1680 x 1050 at 60Hz, 1920 x 540 at 60Hz, 1080i at 50Hz, 1080i at 60Hz, 1080p at 50Hz, 1080p at 60Hz
Video Compliance: HDMI 1.3 and HDCP 1.4
Embedded Audio: PCM 2 Channel Stereo
De-Embedded Audio: 2 Channel Stereo
CEC (Consumer Electronics Control): Yes
Supported Baud Rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200
Maximum Distance (point to point): 100 m (328 ft)
Cable Requirements: Solid Core Category 5e or greater with TIA/EIA-568B crimp pattern
Encoding Data Rate: Up to 30 Mbps, Support CBR and VBR
Encoding Method: H.264/MPEG-4 AVC
End To End Latency: Low Latency Mode: 80 ms, High Quality Mode: 250 ms
Operating Humidity: 20% to 90%, Non-condensing
Storage Temperature: -10° to +60° C (+14° to +140° F)
Storage Humidity: 20% to 90%, Non-condensing
ESD Protection: 8kV air, 4kV contact

Encoder 696235 kb - Data Sheet

Project List