Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
125V/15A Tamper Resistant Self-testing GFCI Receptacle, Black
Model: NTR-15-GFST-BL
- Continuous self-test functionality disconnects power to receptacle if critical components are damaged and GFCI protection is lost providing “continuous self-testing”
- Initiates within 2.5 seconds and is a continuous cycle every 30 seconds or less
- Three provisions for providing protection:
- Continuous electronic sensing, testing and evaluation utilizing diagnostic software located on the printed circuit board.
- Traditional testing mode by manually operating the “test and reset” buttons utilizing a supervisory circuit as specified in UL 943 section 5.15.
Product Info
Tech Specs
Documents
Other Options
NTR-15-GFST is a 125V/15A tamper resistant, self-testing GFCI receptacle. Continuously self-test functionality disconnects power to receptacle if critical components are damaged and GFCI protection is lost providing “continuous self-testing” that initiates within 2.5 seconds and is a continuous cycle every 30 seconds or less.
Manual Test-this design incorporates a full system test function
The GFCI, when manually tested, induces a simulated ground fault leakage current to the printed circuit board
This in turn causes the mechanical system to react based on the action of the solenoid. The entire mechanical and electronic GFCI system is reviewed for functionality
Reverse wire safety feature-if wired incorrectly there will be no power to the face or to downstream receptacles for added safety
Clear visual indication of GFCI status
LED indicating lights:
Green LED (power to the device)
Red LED (trip condition/ground fault condition)
Flashing Red LED (end of life)
Permanently installed internal tamper-resistant shutter mechanism capable of resisting insertion of foreign elements into the device
Internal back wiring clamp and guide pocket quick and dependable termination
Receptacle face compatible with NEMA designer and NovaT® designer-opening wallplates
Compliant with NEC® 406.12 and NEC® 517-18(c)
Available in black
- Continuous self-test functionality disconnects power to receptacle if critical components are damaged and GFCI protection is lost providing “continuous self-testing”
- Initiates within 2.5 seconds and is a continuous cycle every 30 seconds or less
- Three provisions for providing protection:
- Continuous electronic sensing, testing and evaluation utilizing diagnostic software located on the printed circuit board.
- Traditional testing mode by manually operating the “test and reset” buttons utilizing a supervisory circuit as specified in UL 943 section 5.15.
- Auto-sensing mode for immediate interruption for a ground fault condition for Class A protection (4-6 mA)
LED indicating lights:
- Lighting Power Supply Type - Other
- Spec Sheet available - Yes
- Depth: 1.47 in
- Height: 4.56 in
- Width: 2.75 in
- AC Voltage: 125 Volts
- Power:
- Exceeds immunity level of 0.5 V over a frequency range of 150 kHz to 230 MHz
- Environmental:
- Maximum Humidity: 95%
- Electrical:
- Trip Level: 4 to 6 mA
- Trip Time: .025 seconds (nominal)
- Frequency: 60 Hz
- Max Interruption: 10,000 A
- Certifications: UL, FCC, CE
- Operating Temperature (Maximum): 150.80 F
- Operating Temperature (Minimum): -31 F
- Current Draw: 15 Amps
- Emissions:
- Compliant for radiated emissions 30 to 1000 MHz
- Compliant for conducted emissions 150 kHz to 30 MHz
- Color: Black
GFCI
744 kb
- Data Sheet
by
Lutron Electronics Company, Inc.
Model: NTR-15-GFST
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Lutron Electronics Company, Inc.
Model: NTR-15-GFST-BL
Request more information from a dealer near you
close
Request more information from a dealer near you