IP audio converter and capture device with AES67, NDI® and SRT support
Series: Pro Convert
Model: Pro Convert AES67
Part #: 642400000
- Multi-format IP audio encoder, decoder, and capture device
- Supports standards and protocols including AES67 (including support for SMPTE 2110-30), NDI® (uncompressed audio), SRT (with AAC compression) and more
- Converts between multiple audio-over-IP technologies
- Captures or outputs analog audio
- Enables mixed-technology local and Pro AV installations and remote production workflows
Bringing Magewell’s renowned media processing and IP workflow expertise into the audio domain, the flexible Pro Convert AES67 is a multi-format IP audio encoder, decoder, and capture device. Supporting standards and protocols including AES67, NDI®, and SRT, the device can flexibly convert between IP media technologies while also offering a seamless bridge between analog audio, software, and IP networks.
Pro Convert AES67 can send and receive multiple eight-channel unicast or multicast AES67 streams for seamless interoperability with third-party AES67-compatible audio solutions, including compatibility with the SMPTE 2110-30 specification. It can also transport uncompressed audio using the popular NDI® media-over-IP technology, or compressed AAC audio using the low-latency SRT protocol.
Pro Convert AES67 can convert IP-based audio between AES67, NDI®, and SRT, enabling mixed-technology local and remote production workflows that combine third-party products supporting different standards and formats. The device can also encode analog audio into AES67, NDI® or SRT streams as an ‘on-ramp’ to IP networks, as well as decoding IP audio streams for analog output. The compact hardware features balanced and unbalanced, stereo input and output connections.
Pro Convert AES67 can also serve as a plug-and-play analog audio capture device when connected via USB to a laptop or desktop computer. Standard UAC (USB Audio Class) compatibility enables driver-free setup while providing instant compatibility with popular video conferencing, streaming, and production software.
A flexible, virtual audio matrix is accessible through the device’s browser-based user interface and allows routing or mixing of any analog or IP-based input channel to any analog, IP or UAC output. Encoding and processing parameters are also configured through the web interface, with centralized configuration and control of multiple Pro Convert units available through the Magewell Cloud multi-device management software.
- Multi-format IP audio encoder, decoder, and capture device
- Supports standards and protocols including AES67 (including support for SMPTE 2110-30), NDI® (uncompressed audio), SRT (with AAC compression) and more
- Converts between multiple audio-over-IP technologies
- Captures or outputs analog audio
- Enables mixed-technology local and Pro AV installations and remote production workflows
- 3.5mm unbalanced analog input and output
- 4.4mm balanced analog input and output (XLR via included breakout cables)
- Standard UAC compatibility with popular video conferencing, streaming and production software
- AAC stream encoding and transmission plus AAC and MP3 stream receiving and decoding with Icecast support
- Flexible, virtual audio matrix allows routing or mixing of any analog or IP-based input channel to any output
- Power via PoE or USB power supply
- Depth: 60.20 in
- Height: 23.30 in
- Length: 3.97 in
- Receiving/Input Features:
Support for sample rates of 96/48/44.1 KHz, and 16/24bit sample depth
1 x 2-channel 3.5mm TRS unbalanced in (5k Ohm)
1 x 2-channel 4.4mm TRRRS balanced in (20k Ohm)
1 x 4-channel 24-bit/48k USB Audio Class in
Receiving 4 x 8-channel 24-bit AES67 (compatible with SMPTE ST 2110–30) streams (multicast or unicast)
Receiving 1 x 4-channel 24-bit Network audio stream with Icecast, SRT, or NDI protocol, via Ethernet
Frequency Response 20Hz ~ 20kHz (-/+0.5dB)
Dynamic range > 100dB
Signal to noise ratio > 100dB
Total harmonic distortion < 0.01% @ +4dBu
Support for PTP master/slave
Max signal level: unbalanced at 12dBu, balanced at 24dBu
Device buffer at 0.125 ~ 64 ms (controlled via WebUI, 1 to 16 packets with packet time at 0.125/0.25/0.333/1/4 ms) - Sending/Output Features:
Support for sample rates of 96/48/44.1 KHz, and 16/24bit sample depth
1 x 2-channel 3.5mm TRS unbalanced out (10 Ohm)
1 x 2-channel 4.4mm TRRRS balanced out (150 Ohm)
1 x 4-channel 24-bit/48k UAC out
Multicast (IGMPv2) and unicast up to 8 x 8-channel 24-bit AES67 (SMPTE ST 2110–30 compliant) streams
Encoding and transmitting 1 x 4-channel 24-bit audio stream with Icecast, SRT, or NDI protocol
Support for PTP master/slave
Total harmonic distortion < 0.01% @ +4dBu
Frequency Response 20Hz ~ 20kHz (-/+0.5dB)
Dynamic range > 100dB
Signal to noise ratio > 100dB
Max signal level: unbalanced at 12dBu, balanced at 18dBu - Configuration Management:
Registration with Magewell Cloud
Remote control via WebUI and Magewell Cloud
Provides comprehensive information regarding the device and signals in real-time
Configuration of how an input is processed and encoded, including sampling, packets, PTPv2(IEEE 1588–2008), channel adjustment, audio mixing, buffer, as well as the network connection
Support for updating firmware
Support for USB RNDIS/ECM
Support for IE/Edge/Firefox/Chrome/Safari/Opera web browsers
HTTP APIs - Interfaces:
10/100/1000Mbps with PoE (IEEE 802.3af)
USB2.0 Type B (5V/2.1A power supply, USB NET)
3.5mm TRS unbalanced IN/OUT
4.4mm TRRRS balanced IN/OUT - Accessories:
4.4mm to Dual XLR Male Cable
4.4mm to Dual XLR Female Cable
USB 2.0 cable (Type A to Type B)
Universal power adapter
L bracket - On-board Control Buttons: 16 Position Rotary DIP Switch: sets board-index from 0 to F
- Screw Mounting Hole: ¼–20 threaded hole
- Power Consumption:
5V max current: ~ 1 A
Max power consumption: ~ 5 W - Working environment:
Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative humidity: 5% to 90% non-condensing
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/