Signal Routing / Switching : Routing and Matrix Switchers : MuxLab - 500468-PoE

HDMI 8x8 Matrix Switch, 4HDMI+4HDBT, PoE

Model: 500468-PoE

Single modular RJ45 jacks
UTP/STP extension for 1080p Deep Color up to 230 feet (70 meters) via Cat 5e/6 UTP/STP cables
HDMI 3D support
Seamless integration with MuxLab's HDMI Receiver (500451-RX, 500454-RX or 500454-POE-RX). Note: The 500451-RX doesn't support RS-232 and PoE functionality.
HDMI input supported with resolution up to 1080p

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The MuxLab HDMI 8×8 Matrix Switch, HDBT, PoE allows 8 HDMI sources to be switched/distributed to up to 8 remote displays via unshielded twisted pair (UTP) or shielded twisted pair (STP) cables for cost-efficient connectivity. Remote displays can be connected up to 230 feet (70 meters) @ 1080p Deep Color via Cat 5e/6 UTP/STP cables. The Matrix Switch works in conjunction with MuxLab’s HDMI Receiver (500451-RX, 500454-RX or 500454-POE-RX)

Single modular RJ45 jacks
UTP/STP extension for 1080p Deep Color up to 230 feet (70 meters) via Cat 5e/6 UTP/STP cables
HDMI 3D support
Seamless integration with MuxLab's HDMI Receiver (500451-RX, 500454-RX or 500454-POE-RX). Note: The 500451-RX doesn't support RS-232 and PoE functionality.
HDMI input supported with resolution up to 1080p
HDBaseT supported output
Configurable EDID settings
Web interface
RS232 and USB CDC control
Firmware is field upgradable
Touch pad on front panel for manual control
Device control over HTTP protocol
2U rackmount unit

Spec Sheet available - Yes

9500418-POE-500419-PoE-500468-PoE-5004692.pdf 236 kb - Data Sheet

Project List

Suggested Products

4K 4×4 Seamless Audio and Video Matrix with Video Wall

by Vanco International

2.0 HDBaseT 8x6 Matrix (compatible w/ EVRXDSC & EVRXHD2) w/ 2 HDMI output 4K/60Hz HDR HDCP2.2, IP Control, RS-232, and Audio Breakout

by Vanco International

HDMI 2.0 2x2 Matrix Switcher with Audio Extractor

by Covid, Inc.