Pro AV Catalog
MuxLab - 500753
Request Quote
All Products

HDMI/RS232 over IP Extender Kit with PoE

Model: 500753

  • HDMI 1.3, PoE powered
  • Supports up to 1080p resolutions
  • Supports IR, and RS232 transmission
  • Motion JPEG compression with Very low latency
  • Transmission up to 330 ft (100m) over Cat5e/6
Compare
Project List
Product Info
Tech Specs
Documents
The HDMI/RS232 over IP Extender Kit with PoE allows HDMI equipment to be connected up to 330 feet (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several encoders and decoders to the same Ethernet network. The Encoder (500753-TX) and Decoder (500753-RX) also support PoE (PD) if used with a PoE Ethernet Switch. The kit comes with one (1) Encoder and one (1) Decoder as well as an IR Emitter and IR Sensor for remote control applications. For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. We recommend using the Cisco SG300 Series Managed Switches. A MuxLab Management Software is available to simplify the configuration and utilization of the 500753.
  • HDMI 1.3, PoE powered
  • Supports up to 1080p resolutions
  • Supports IR, and RS232 transmission
  • Motion JPEG compression with Very low latency
  • Transmission up to 330 ft (100m) over Cat5e/6
  • Compatible VGA over IP with RS232
  • Up to 390 ft (120m) between the TX and RX when no LAN switch is used
  • Control via Windows-based software or via any web device (mobile, tablet) with use of model 500810 (Pro Digital Network Controller)
  • Applications:
    • Commercial and residential AV systems
    • Classroom projector systems
    • Digital signage
    • Boardroom systems
    • Collaborative PC systems
    • Medical information systems
 
Request Quote
 

Suggested Products

Shopping Basket