Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
8200 Lumens XGA 1-chip DLP Fixed Installation Projector
Model: PT-DX820U
- 1-Chip DLP, 8200 lumens, XGA
- Dual lamp system with up to 6000 hours lamp life (in eco mode)
- Lamp relay mode enables 24/7 operation
- Dust-resistant optical engine allows filter-less design
- Multi-screen support including edge blending and colour matching function
Product Info
Tech Specs
Related Products
Documents
The PT-DX820U 1-Chip DLP Fixed Installation Projector delivering stunning colors and highly flexible projection for museums, exhibitions and digital signage applications.
- 1-Chip DLP, 8200 lumens, XGA
- Dual lamp system with up to 6000 hours lamp life (in eco mode)
- Lamp relay mode enables 24/7 operation
- Dust-resistant optical engine allows filter-less design
- Multi-screen support including edge blending and colour matching function
- Aspect Ratio - 4:3
- HDBaseT - Yes
- Number of Imagers - 1-chip
- Projector Applications - Digital Cinema
- Projector Technology Type - DLP
- Supported Resolution - XGA (1024x768)
- Contrast Ratio: 10000
- Depth: 21.89 in
- Height: 7.87 in
- Operating Humidity: 10% - 80% (no condensation)
- Resolution: 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
- Screen Size: 1.27-15.24 m (50-600 inches), 1.27-5.08 m (50-200 inches) with the ET-DLE055 (4:3 aspect ratio), 2.54-8.89 m (100-350 inches) with the ET-DLE030 (4:3 aspect ratio)
- Width: 19.61 in
- Lamp Type: 420W UHM
- Installation: Ceiling/floor, front/rear
- Regulatory Compliance: HDCP
- Technology: 1-Chip DLP
- Communication Ports: RS232
- Keystone Correction Range: Vertical +/-40°, +/-30° with the ET-DLE055/ET-DLE085/ET-DLE105. Cannot be used when the ET-DLE030 is installed.
- Optical Axis Shift: Vertical: +50% (powered) (+/-45° with the ET-DLE085/ET-DLE105), Horizontal: +/-10% (powered), NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed.
- Power Cord Length: 3m (9ft 10in)
- Product Weight: 40.34 lbs
- Center-to-corner uniformity: 90%
- Brightness Full: 8200 lumens
- Lamp Life Full: 12000 hours
- Chip Quantity: 1
- Communication Formats: RS232C
- Lamp Quantity: 2
- Cabinet materials: Molded plastic
- Operation noise: 40dB (dual lamp operation, lamp mode: normal), 35dB (dual lamp operation, lamp mode: Eco)
- Scanning Frequency YPBPR (YCBCR): 525i(480i): fH 15.75kHz, fV 60Hz, 625i(576i): fH 15.63kHz, fV 50Hz,525p(480p): fH 31.50kHz, fV 60Hz, 625p(576p): fH 31.25kHz, fV 50Hz, 750(720)/60p: fH 45.00kHz, fV 60Hz, 750(720)/50p: fH 37.50kHz, fV 50Hz, 1125(1035)/60i: fH 33.75kHz, fV 60Hz, 1125(1080)/60i: fH 33.75kHz, fV 60Hz, 1125(1080)/50i: fH 28.13kHz, fV 50Hz, 1125(1080)/25p: fH 28.13kHz, fV 25Hz, 1125(1080)/24p: fH 27.00kHz, fV 24Hz, 1125(1080)/24sF: fH 27.00kHz, fV 48Hz, 1125(1080)/30p: fH 33.75kHz, fV 30Hz, 1125(1080)/60p: fH 67.50kHz, fV 60Hz, 1125(1080)/50p: fH 56.25kHz, fV 50Hz
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 5.20 Amps
- Scanning frequency (RGB): fH: 15 - 100kHz, fV: 24 - 120Hz, dot clock: 162 MHz or lower
- Terminals SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
- Terminals SERIAL OUT: D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
- AC Voltage (Minimum): 120 Volts
- AC Voltage (Maximum): 240 Volts
- Terminals RGB 1 IN: BNC x 5
- Terminals RGB 2 IN: D-sub HD 15-pin (female) x 1
- Terminals VIDEO IN: BNC x 1, 1.0Vp-p, 75 ohms
- Terminals HDMI IN: HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz, NOTE: Compatible with non-interlaced signals only.
- DLP™ chip Panel size: 17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
- Terminals DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only, 525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz, NOTE: Compatible with non-interlaced signals only.
- Terminals 3D SYNC 1 IN/OUT: BNC x 1, 1.0Vp-p, 75 ohms, Input: TTL, high impedance. Output: TTL, max. 10 mA
- Terminals 3D SYNC 2 OUT: BNC x 1, 1.0Vp-p, 75 ohms, TTL, max. 10 mA
- Terminals Remoter 1 In: M3 jack x 1 for wired remote control
- Terminals Remoter 1 Out: M3 jack x 1 for link control
- Terminals Remoter 2 In: D-sub 9-pin (female) x 1 for external control (parallel)
- DLP™ chip Display method: DLP™ chip x 1, DLP™ system
- Terminals LAN/DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz, NOTE: Compatible with non-interlaced signals only.
- Scanning Frequency (Video/S-Video): fH: 15.75kHz, fV: 60Hz [NTSC/NTSC4.43/PALM/PAL60], fH: 15.63kHz, fV: 50Hz [PAL/PAL-N/SECAM]
- Terminals RGB 1 IN R, G, B: R: 0.7Vp-p, 75 ohms, G: 0.7Vp-p (G: 1.0Vp-p for sync on G), 75 ohms, B: 0.7Vp-p, 75 ohms, HD, VD/SYNC: TTL, high impedance, positive/negative automatic, NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
- Terminals RGB 1 IN Y, PB, PR (Y, CB, CR): Y: 1.0Vp-p (including sync signal), PB/PR (CB/CR): 0.7Vp-p, 75 ohms
- Terminals RGB 1 IN S-Video signal: Y: 1.0Vp-p, C: 0.286Vp-p, 75 ohms
- Terminals RGB 2 IN R, G, B: R: 0.7Vp-p, 75 ohms, G: 0.7Vp-p (G: 1.0Vp-p for sync on G), 75 ohms, B: 0.7Vp-p, 75 ohms, HD, VD/SYNC: TTL, high impedance, positive/negative automatic, NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
- Terminals RGB 2 IN Y, PB, PR (Y, CB, CR): Y: 1.0Vp-p (including sync signal), PB/PR (CB/CR): 0.7Vp-p, 75 ohms
- Scanning Frequency (HDMI/DVI-D): fH: 15 - 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz
ET-DLE085
- Zoom Lens for Projector
PT-EX12KU
- 13000-Lumen XGA Large Venue Professional Projector, 1024 x 768 pixels
PT-EX16KU
- 16000 Lumen Large Venue Professional Projector, 1024 x 768 pixels
PT-EX520U
- 5300 Lumens XGA Fixed Installation LCD Projector
PT-EX620U
- 6200 Lumens WXGA Fixed Installation LCD Projector
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Panasonic
Model: PT-DX820U
Request more information from a dealer near you
close
Request more information from a dealer near you