20000 Lumens 3-chip WUXGA DLP Large Venue Projector
Series: Pro AV
Model: PT-DZ21K2U
- 3-chip DLP, 20000 lumens, WUXGA
- 120Hz high frame rate for superb and sharp motion pictures
- Compact design, light weight and low noise level (as low as 46db)
- Quad-lamp redundancy for failsafe operation
- Fully featured for single or multi-mapping installations
The PT-DZ21K2U is a 20000 lumens 3-chip DLP projector for large venues. It has WUXGA native resolution.
Dynamic Iris for a High 10,000:1 Contrast Ratio:
Panasonic’s Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures. Full on/off, with dynamic iris set to “3”.
Detail Clarity Processor 3 Gives Natural Clarity to Even the Finest Details:
This unique Panasonic circuit optimizes the sharpness of each image, based on the super-high-, high-, medium-, and low-frequency components of the extracted image information. The resulting images have more natural, lifelike expression
System Daylight View 2 for Enhanced Color Perception:
This unique Panasonic technology optimizes image quality to improve the color perception of the projected image in bright rooms. With a brightness of 20,000 lm , it provides highly comfortable viewing even in bright lighting, and allows viewers to concentrate easily on the images.
DICOM Simulation Mode:
This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity.
Acitve 3D Projection Capability (PT-DZ21K/DS20K):
The series is compatible with both passive and active 3D projection systems. It combines with either a separate, external 100/120/144 Hz drive with IR emitter and active shutter glasses, or an active filter and passive glasses, for viewing 3D images.
High Reliability and Low TCO with Easy Maintenance
Low TCO and an Environmentally Friendly Design
The PT-DZ21K2U Series projectors lower the total cost of ownership (TCO) because they have a lamp replacement cycle of up to 3,000 hours . Their environmentally friendly design also includes a low power consumption of 2,300 W. The values given for lamp replacement cycles are for landscape orientation. The usage environment affects the lamp replacement cycle.
Four-Lamp System Enables Stable, Extended Operation:
The four-lamp system allows the projector to keep working even if a lamp should fail. The Lamp Relay mode also operates the lamps alternately to enable 24/7 projection. Quad, Triple,
- 3-chip DLP, 20000 lumens, WUXGA
- 120Hz high frame rate for superb and sharp motion pictures
- Compact design, light weight and low noise level (as low as 46db)
- Quad-lamp redundancy for failsafe operation
- Fully featured for single or multi-mapping installations
- 3D Ready - Yes
- Aspect Ratio - 16:9
- HDBaseT - Yes
- Integrated Speakers - Yes
- Number of Imagers - 3-chip
- Projector Applications - 3D
- Projector Applications - Other
- Projector Technology Type - DLP
- Supported Resolution - WUXGA (1920x1200)
- Lamp Life Full: 3000 hours
- Brightness Full: 20000 lumens
- Contrast Ratio: 10000
- Technology: DLP
- Lens Type: Powered Zoom and Fixed-focus
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Communication Formats: RS232C
- Communication Ports: RS232
- Lamp Quantity: 4
- Lamp Type: 432W UHM
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 200 Volts
- Active Power: 2060 Watt
- Current Draw: 12 Amps
- Depth: 31.50 in
- Height: 11.46 in
- Width: 24.41 in
- Product Weight: 90.40 lbs
- Resolution: 1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)
- DLPâ„¢ chip Panel size: 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
- DLPâ„¢ chip Display method: DLPâ„¢ chip x 3 (R, G, B), DLPâ„¢ projection system
- DLPâ„¢ chip Pixels: 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
- Screen Size: 1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:10 aspect ratio
- Center-to-corner uniformity: 90%
- Scanning Frequency RGB: Horizontal: 15-100 kHz, vertical: 24-120 Hz, dot clock: 162 MHz or less
- Scanning frequency Video/Y/C: fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
- Optical axis shift Vertical: +/-55% (+/-44% with the ET-D75LE6, +73-+78% with the ET-D75LE90) from center of screen, powered
- Optical axis shift Horizontal: +/-20% (+/-15% with the ET-D75LE6, +/-6% with the ET-D75LE90) from center of screen, powered
- Keystone Correction Range: Vertical : +/-40° (+/-22° with the ET-D75LE50, +/-28° with the ET-D75LE6, +5° with the ET-D75LE90), horizontal: +/-15°
- Installation: Ceiling/floor, front/rear
- Terminals SDI IN 1: BNC x 1
- Terminals SDI IN 2: BNC x 1
- Terminals HDMI IN: HDMI 19-pin x 1, Deep Color, compatible with HDCP
- Terminals DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
- Terminals DIGITAL LINK/LAN: RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible
- Terminals RGB 1 IN: BNC x 5
- Terminals RGB 1 IN S-Video signal: Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
- Terminals RGB 2 IN: D-sub HD 1 5-pin (female) x 1
- Terminals RGB 2 IN R, G, B: R: 0.7 Vp-p, 75 o hms
- Terminals 3D SYNC 1 IN/OUT: BNC x 1, 1.0 Vp-p, 75 ohms
- Terminals 3D SYNC 2 OUT: BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
- Terminals SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
- Terminals SERIAL OUT: D-sub 9-pin (male) x 1 for link control
- Terminals Remoter 1 In: M3 jack x 1 for wired remote control
- Terminals Remoter 1 Out: M3 jack x 1 for link control
- Power Cord Length: 3.0 m (9 ft 10 in)
- Cabinet materials: Molded plastic
Suggested Products
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/