12000 Lumens WUXGA 3-chip DLP Laser Projector
Model: PT-RZ12KU
- High picture quality and brightness of 12,000 lm in a very compact and lightweight body
- Up to 20,000 hours of reliable maintenance-free operation
- Installation flexibility and powerful functionality
- Applications:
- Rental/Staging
The PT-RZ12KU 12000 lumens WUXGA 3-chip DLP laser projector. It features high picture quality in a very compact and lightweight body.<p><B>Diagram for 3-Chip DLP™ Laser Projector:</B><p>Combining 3-Chip DLP™ imaging with Panasonic’s original SOLID SHINE Laser technology, the PT-RZ12K Series achieves truly stunning picture quality. Two powerful solid-state laser light sources, a heat-resistant phosphor wheel, and three independent DLP™ chips for red, green, and blue ensures class-leading brightness, color accuracy, and contrast. Heat-resistant phosphor wheel ensures high brightness and excellent reliability for long periods.<p><B>Accurate Color Reproduction:</B><p>The PT-RZ12K Series captures a more accurate Rec. 709-compliant color space than comparable laser projectors. A blue laser ensures greater precision, while an expanded color gamut improves white balance accuracy.<p><B>Ultra-Durable Laser Optical Engine for Continuous 24-hour Operation:</B><p>Dual Drive Laser Optical Engine uses two discrete light sources grouping laser diodes into modules. A failsafe laser light source redundancy circuit ensures minimal reduction in brightness and color uniformity in the event of laser diode failure, making PT-RZ12K Series ideal for mission-critical applications. Further, brightness decreases gradually and in a linear rather than exponential fashion (as is common to lamp-based projectors) over its 20,000-hour maintenance-free service life.<p><B>Lower Total Cost of Ownership:</B><p>Large, pin-sharp images will not burn a hole in your pocket. Expect up to 20,000 hours maintenance-free service at full power with no filters to clean or replace thanks to a fully sealed optical block. At this time the brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after every 20,000-hour period (approximately). Light source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period.
- High picture quality and brightness of 12,000 lm in a very compact and lightweight body
- Up to 20,000 hours of reliable maintenance-free operation
- Installation flexibility and powerful functionality
- Applications:
- Rental/Staging
- Auditorium
- Museums
- House of Worship and more
- Aspect Ratio - 16:10
- HDBaseT - Yes
- Number of Imagers - 3-chip
- Projector Applications - Houses of Worship
- Projector Applications - Other
- Projector Technology Type - DLP
- Supported Resolution - SXGA+ (1400x1050)
- Supported Resolution - WUXGA (1920x1200)
- Brightness Full: 12000 lumens
- Chip Quantity: 3
- Contrast Ratio: 20000
- Technology: DLP
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Lamp Type: Laser Diode
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Depth: 28.54 in
- Height: 10.63 in
- Width: 22.76 in
- Product Weight: 97 lbs
- Noise: 43 dB
- Regulatory Compliance: HDCP
- Power Consumption:
• 1200 W (0.3 W with Standby Mode set to Eco, 4 W with Standby Mode set to Normal)
•Normal Mode: 800 W, Eco Mode: 680 W, Long Life 1 Mode: 620 W, Long Life 2 Mode: 590 W, Long Life 3 Mode: 550 W (Operating temperature: 25°C, Altitude: 700 m, IEC62087: 2008 Broadcast Content, Image Mode: Dynamic, Dynamic Contrast Mode: 3) - DLP™ chip:
•Panel size: 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
•Display method: DLP™ chip × 3, DLP™ projection system
•Pixels: 6,912,000 (1920 x 1200 x 3) pixels - Refresh rate: 120 Hz
- Lens: Optional (no lens included with this model)
- Light source:
•Laser diodes laser Class 1 (Class 3R for US models)
•Light source life: 20,000 hours (Normal Mode) / 24,000 hours (Eco Mode), At this time the brightness will have decreased to approximately half of its original level. - Screen size (diagonal):
• 1.78-25.4 m (70-1000 in) with 16:10 aspect ratio
• 1.78-15.24 m (70-600 in) with the ET-D75LE8, 16:10 aspect ratio
• 3.05-15.24 m (120-600 in) with the ET-D75LE90, 16:10 aspect ratio - Center-to-corner uniformity: 90 %
- Scanning Frequency:
•SDI
•SD-SDI: SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i
•Single link HD-SDI: SMPTE ST 292 compliant, [YPBPR 4:2:2 10-bit] 720/60p, 720/50p, 1035/60i, 1080/60i, 1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
•Dual link HD-SDI: SMPTE ST 372 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/60i, 1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 2048 x 1080/24p, 2048 x 1080/24sF, X’Y’Z’ 4:4:4 12-bit] 2048 x 1080/24p, 2048 x 1080/24sF
• 3G-SDI: SMPTE ST 424 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/60i, 1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, [YPBPR 4:2:2 10-bit] 1080/60p, 1080/50p
•Dual link 3G-SDI: SMPTE ST 425 compliant, [YPBPR 4:4:4 12-bit/10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p,
•RGB 4:4:4 12-bit/10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p
•HDMI/DVI-D: Compatible with HDCP, 480i, 576i, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 640 x 480-WUXGA (1920 x 1200) (compatible with non-interlaced signals only), dot clock: 25-162 MHz
•RGB: fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower
•YPBPR (YCBCR)
•fH: 15.73 kHz, fV: 59.94 Hz [480i (525i)], fH: 15.63 kHz, fV: 50 Hz [576i (625i)], fH: 31.47 kHz, fV: 59.94 Hz [480p (525p)], fH: 31.25 kHz, fV: 50 Hz [576p (625p)],
•fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p], fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p], fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i], fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i],
•fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i], fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p], fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p], fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF],
•fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p], fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p], fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
•Video/YC: H: 15.75 kHz, fV: 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60), fH: 15.63 kHz, fV: 50 Hz (PAL/PAL-N/SECAM) - Optical axis shift:
•Horizontal (from center of screen): ±55 % (±44 % with the ET-D75LE6, +73 % - +78 % with the ET-D75LE90) (powered)
•Vertical (from center of screen): ±20 % (±15 % with the ET-D75LE6, ±6 % with the ET-D75LE90) (powered) - Keystone correction range: Vertical: ±40° (± 22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±15° (0° with ET-D75LE90)
- Keystone correction range with optional Upgrade Kit ET-UK20: Vertical: ±45° (± 40° with ET-D75LE10/20, ±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±40° (±15 ° with ET-D75LE50/6, 0° with ET-D75LE90), Up to a total of ±55° during simultaneous horizontal and vertical correction.
- Installation: Horizontal/vertical, free 360-degree installation
- Terminals:
•SDI IN 1: HDMI 19-pin × 1 (Deep Color, compatible with HDCP)
•SDI IN 2: BNC × 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (LINK-A), Dual-link 3G-SDI (LINK 1)
•HDMI IN: BNC × 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (LINK-B), Dual-link 3G-SDI (LINK 2)
•DVI-D IN: DVI-D 24-pin × 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
•RGB 1 IN: RGB × 1 (BNC × 5): RGB/YPBPR/YCBCR/YC/VIDEO
•RGB 2 IN: D-sub HD 15-pin (female) × 1: RGB/YPBPR/YCBCR
• 3D SYNC 1 IN/OUT: BNC × 1: 3D timing signal
• 3D SYNC 2 OUT: BNC × 1: 3D timing signal
•SERIAL IN: D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
•SERIAL OUT: D-sub 9-pin (male) × 1 for link control
•REMOTE 1 IN: M3 × 1 for wired remote control, link control
•REMOTE 1 OUT: M3 × 1 for wired remote control, link control
•REMOTE 2 IN: D-sub 9-pin (female) × 1 for external control (parallel)
•DIGITAL LINK/LAN: RJ-45 × 1 for network, DIGITAL LINK connection, 100Base-TX, compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP - Cabinet materials: Molded plastic
- Dimensions (W × H × D): 578 x 323.5 x 740 mm (22 3/4 × 12 23/32 × 29 1/8 inch ) (Including legs at shortest position and protruding parts)
- Operating humidity: 10 to 80 % (no condensation)
- Applicable software: Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Upgrade Kit)
- Supplied Accessories: Power cord x 1 (x 2 for “E” model), wireless/wired remote control unit, batteries (R6/AA type × 2), software CD-ROM (Logo Transfer Software, Multi Monitoring & Control Software), lens fixing screw
Suggested Products
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/