D-PSP1AF Decora-Style Active Loudspeaker - Format-A
Model: D-PSP1AF
- Exceptional Audio Quality for Ultra-Compact Size
- 2 Watt RMS Audio Amplifier
- Compressor/Limiter Prevents Clipping
- Connects to Format-A Sender using Twisted-Pair Cable
- Powered from RDL Twisted Pair Format-A Sender
The D SERIES-PSP1AF is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. It is a single-pair audio amplifier module compatible with RDL Format A twisted pair products. The PSP1AF receives audio and 24 Vdc power through a rear-panel RJ45 jack. A rear-panel switch set during installation determines which of the three FORMAT-A pairs is amplified. Amplification is provided by a high-efficiency Class D power stage with audio filtering tailored for crisp, pleasant audio clarity. The high-efficiency Class D output stage produces negligible heat for all levels of expected voice or music modulation. The amplified output level is set by the installer using a volume control located behind the speaker grill. The PSP1AF includes an analog compressor/limiter that makes higher average sound output levels possible without clipping.
The driver is constructed of materials found in premium larger speakers. The unique steel enclosure provides full baffling in a tightly sealed rigid structure. This produces sonic presence within an extended frequency range expected from larger speakers. Internal filtering rolls off out-of-band frequencies to reduce distortion and increase peak power capability. Dispersion covers a spherical area of nearly 180 degrees with the speaker mounted in a wall.
Models are available with grills in black (DB-PSP1AF), white (D-PSP1AF), gray (DG-PSP1AF) or stainless steel (DS-PSP1A).
- Exceptional Audio Quality for Ultra-Compact Size
- 2 Watt RMS Audio Amplifier
- Compressor/Limiter Prevents Clipping
- Connects to Format-A Sender using Twisted-Pair Cable
- Powered from RDL Twisted Pair Format-A Sender
- Gain Set by the Installer
- Acoustically Optimized Decora Enclosure
- Fidelity Comparable to Larger Drivers
- Hemispherical Dispersion Mounted In Wall or Flat Surface
- Spec Sheet available - Yes
- Input Connection:: RJ45
- Format-A Signal Pair Used:: Switch-selectable A, B, or C (Rear-panel)
- Gain Adjustment:: Single-turn audio taper (set by installer)
- Maximum SPL:: 81 dB
- Frequency Range:: 150 Hz to 20 kHz, nominal
- CMRR:: > 80 dB (50 Hz to 120 Hz)
- Power Requirement:: 24 Vdc @ 55 mA (Idle); 100 mA (maximum), Ground-referenced
- Ambient Operating Environment:: 0° C to 40° C Maximum; 20° C Recommended
- Dimensions:: Height: 4.12 in. 10.46 cm; Width: 1.72 in. 4.37 cm; Depth:
- Package Type:: Cardboard Box
- Package Dimensions:: 3.625 x 4.625 x 2.125 in.
- Shipping Weight:: .562 lbs.
- WEEE weight:: 0.418 lbs.
- Tariff code:: 8518.40.2000
Single Cover Plate - white
CP-1B
Single Cover Plate, Black
CP-1G
Single Cover Plate - gray
CP-1S
CP-1S Single Cover Plate, Stainless Steel
CP-2
Double Cover Plate - white
CP-2B
Double Cover Plate, Black
CP-2G
Double Cover Plate, Gray
CP-2S
CP-2S Double Cover Plate, Stainless Steel
CP-3
CP-3 Triple Cover Plate - white
CP-3B
Triple Cover Plate, Black
CP-3G
Triple Cover Plate, Gray
CP-3S
CP-3S Triple Cover Plate, Stainless Steel
CP-4
CP-4 Quadruple Cover Plate - white
CP-4B
Quadruple Cover Plate, Black
CP-4G
Quadruple Cover Plate, Gray
CP-4S
CP-4S Quadruple Cover Plate, Stainless Steel
DC-1B
Desktop or Wall Mounted Chassis, Holds 1 Decora-style Remote Controls and Panels, Black
DC-1G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-1W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-2B
Desktop or Wall Mounted Chassis, Holds 1/2 Decora-style Remote Controls and Panels, Black
DC-2G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-2W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-3B
Desktop or Wall Mounted Chassis, Holds 1/2/3 Decora-style Remote Controls and Panels, Black
DC-3G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-3W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-4B
Desktop or Wall Mounted Chassis, Holds 1/2/3/4 Decora-style Remote Controls and Panels, Black
DC-4G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-4W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
RM-D3
19" Rack Mount for 3 Decora® Modules
SMB-1B
Surface Mount Box for Decora® Remote Controls and Panels, 2.88" Width, Black
SMB-1G
Surface Mount Boxes for Remote Controls and Panels
SMB-1W
Surface Mount Boxes for Remote Controls and Panels
SMB-2B
Surface Mount Box for Decora® Remote Controls and Panels, 4.69" Width, Black
SMB-2G
Surface Mount Boxes for Remote Controls and Panels
SMB-2W
Surface Mount Boxes for Remote Controls and Panels
SMB-3B
Surface Mount Box for Decora® Remote Controls and Panels, 6.62" Width, Black
SMB-3G
Surface Mount Boxes for Remote Controls and Panels
SMB-3W
Surface Mount Boxes for Decora® Remote Controls and Panels
SMB-4B
Surface Mount Box for Decora® Remote Controls and Panels, 8.43" Width, Black
SMB-4G
Surface Mount Boxes for Remote Controls and Panels
SMB-4W
Surface Mount Boxes for Decora® Remote Controls and Panels
WB-1U
Universal Wall Box, Single
WB-2U
Universal Wall Box, Double
Suggested Products
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/