Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Active Three Pair Sender Twisted Pair Format-A XLR Microphone & Stereo RCA In
Series:
Model: D-TPS3A
- Balanced Microphone XLR Input with Phantom
- Switch-Selectable Mic Gain on Rear Panel
- Two Unbalanced -10 dBV Phono Jack Line Inputs
- MIC Feeds Pair A; L Feeds Pair B; R Feeds Pair C
- Remote Powering through Twisted Pair Cable
Product Info
Tech Specs
Related Products
Documents
The -TPS3A modules are three-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The D- and DS- models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS3A features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DS-TPS3A is constructed of stainless steel to coordinate with RDL Decora©-style stainless steel remote controls in commercial/industrial installations. The AF-TPS3A is an APPFLEX series product that is compatible with various APPFLEX wall-mount, cabinet-mount and tabletop enclosures. The EM-TPS3A is a 45mm square module that fits the European Modular mounting frames and cover plates. European electrical boxes are not sufficiently deep to accommodate RJ45 jacks and plugs, therefore the EM- products connect to the twisted pair cable through a detachable terminal block.
The -TPS3A modules features an XLR microphone input and two RCA phono jack inputs, one for the left channel source and one for the right channel source. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The buffered left and right line-level inputs are routed to output cable pairs B and C.
These modules drive all three FORMAT-A cable pairs, so they are not equipped to receive inputs from other sender modules. The -TPS3A may not be connected together with any other sending modules.
The -TPS3A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable.
The -TPS3A modules features an XLR microphone input and two RCA phono jack inputs, one for the left channel source and one for the right channel source. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The buffered left and right line-level inputs are routed to output cable pairs B and C.
These modules drive all three FORMAT-A cable pairs, so they are not equipped to receive inputs from other sender modules. The -TPS3A may not be connected together with any other sending modules.
The -TPS3A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable.
- Balanced Microphone XLR Input with Phantom
- Switch-Selectable Mic Gain on Rear Panel
- Two Unbalanced -10 dBV Phono Jack Line Inputs
- MIC Feeds Pair A; L Feeds Pair B; R Feeds Pair C
- Remote Powering through Twisted Pair Cable
- Fused Local Power Feeds all Connected Modules
- Local Power Input on Terminal Block
- Blue LED Indicates Module is Powered
- Utilizes All Three Format-A Pairs
- Studio-Quality Precision Active Balanced Circuitry
- Inputs (3): Mic: 1.2 k Balanced with IEC 24 Vdc Phantom; Line (left and right): 10 k ohm Unbalanced
- overall length: Mic: XLR; Line: RCA Phono
- Input Level: Mic: -45 to -65 dBu Balanced; Maximum: -40 dBu (HIGH Gain), -28 dBu (NORM Gain); Line: -10 dBV Unbal.; +10 dBV Max
- Format-A Signal Pairs Used: A (Mic); B (Unbal Line Left); C (Unbal Line Right)
- Gain: Mic: 50 dB (NORM) or 63 dB (HIGH), Switch-selectable on rear panel; Line: 12 dB
- Outputs: RDL TP Format-A
- Output Connection: RJ45 (Models D-, DS-, AF-); Detachable Terminal Block (Model EM-)
- Frequency Response: Mic: 100 Hz to 30 kHz (+/- 1 dB); integral low-cut filter -10 dB @ 30 Hz; Line: 20 Hz to 50 kHz (+/- 0.5 dB)
- THD+N: Mic: < 0.1% (80 Hz to 20 kHz); Line: < 0.05% (20 Hz to 50 kHz); <0.005% (1 kHz)
- Noise below +4 dBu: Mic: < -80 dB (NORM Gain), < -70 dB (HIGH Gain); Line: < -95 dB
- Crosstalk:
Line to Line: < 90 dB (1 kHz); < 75 dB (20 Hz to 20 kHz); Line to Mic (HIGH Gain): < 65 dB (1 kHz), < 60 dB (20 Hz to 20 kHz);
Line to Mic (NORM Gain): < 75 dB (1 kHz), < 70 dB (20 Hz to 20 kHz) - Headroom above +4 dBu: > 18 dB
- CMRR: Mic: > 60 dB (HIGH Gain 50 Hz to 150 Hz), > 65 dB (NORM Gain 50 Hz to 150 Hz)
- Indicator: Power In
- Power Connections (2): Detachable terminal block; RJ45
- Power Requirement: 24 Vdc @ 65 mA plus connected loads
- Dimensions:
EM-TPS3A: 1.77" (45 mm) W and H; 1.93" (4.9 cm) D
D-, DS-TPS3A: 1.6" (4.06 cm) W; 4.11" (10.45 cm) H; 1.89" (4.8 cm) D
AF-TPS3A: 2.22" (5.64 cm) W; 2.77" (7.04 cm) H; 1.89" (4.8 cm) D - Mounting Box Minimum Depth: 2.4" (Models D-, DS-, AF-); 39 mm (Model EM-)
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Number of Inputs: 3
- Number of Outputs: 1
- Depth: 2.40 in
- Shipping Weight: 0.40 lbs
D-TPR1A
- Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output
D-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs
D-TPS1A
- Active Single Pair Sender Twisted Pair Format-A XLR Microphone Input with Phantom
DB-TPS3A
- DB-TPS3A
Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA inputs
DS-TPR1A
- Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR mic/line output
DS-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo phono out
FP-TP4PW
- Power Inserter - Twisted Pair - Four Sets of Outputs - Signal Loop-through
FP-TPX3A
- Format-A Twisted Pair Remote Controlled Mixer
RU-BNF
- Format-A Bi-directional Network Interface
RU-BNFP
- Format-A Bi-directional Network Interface with PoE
RU-FN
- Format-A to Network Interface
RU-TP4PW
- Power Inserter - Twisted Pair - four sets of outputs - signal loop-through
RU-TPDA
- Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs
RU-TPS4A
- Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs
TX-TP1PW
- Power Inserter
TX-TPS1A
- Active Single-Pair Sender, Twisted Pair Format-A
TX-TPSA1A
- Three-Pair Combiner to Single-Pair Sender
Datasheet for Active Three-Pair Sender - Twisted Pair Format-A
230796 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Radio Design Labs
Model: D-TPS3A
Request more information from a dealer near you
close
Request more information from a dealer near you