Passive Single-Pair Sender
Series:
Model: D-TPS7A
- Stereo Audio Input Combined to Mono Output
- Input on Mini-jack
- Switch Selects which RJ45 Pair (A, B or C) is Fed
- Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
- Passive Circuitry Does Not Require Power
The -TPS7A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features a single stereo mini-jack intended for stereo consumer line level audio sources. A studio-quality transformer provides isolation between the audio source and the RJ45 TP CABLE.
The -TPS7A is a single-pair sender, feeding the input signal to the cable pair set on the rear-panel switch during installation. This module drives only one cable pair, therefore a TP CABLE RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to a TP CABLE jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The -TPS7A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C.
The -TPS7A is a passive module that does not require power to operate. If power is present on a cable connected to a TP CABLE jack, that power is passed through to the modules connected to the other TP CABLE jack.
- Stereo Audio Input Combined to Mono Output
- Input on Mini-jack
- Switch Selects which RJ45 Pair (A, B or C) is Fed
- Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
- Passive Circuitry Does Not Require Power
- Galvanic Isolation through a Studio-Quality Transformer
- Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
- Spec Sheet available - Yes
- input:: 3.5mm mini-jack, unbalanced stereo combined to mono
- Input Level:: -10 dBV, +22 dBu max
- Format-A Signal Pair Used:: Switch-selectable A, B, or C (rear-panel switch)
- Format-A Input:: RJ45 TP CABLE
- Ouput:: RJ45 TP CABLE, RDL TP Format-A
- Frequency Response:: 20 Hz to 20 kHz (±0.5 dB)
- THD:: < 0.1% (50 Hz to 20 kHz); <0.001% (1 kHz typ)
- Power Requirement:: Passive
- Dimensions:: 1.6” (4.06 cm) W; 4.11” (10.45 cm) H; 1.89” (4.8 cm) D
- Number of Inputs: 1
- Number of Outputs: 2
- Depth: 1.89 in
- Height: 4.11 in
- Width: 1.60 in
- Shipping Weight: 0.40 lbs
Single Cover Plate - white
CP-1G
Single Cover Plate - gray
CP-2
Double Cover Plate - white
CP-2G
Double Cover Plate, Gray
DC-1G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-1W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-2G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-2W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-3G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-3W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-4G
Desktop or Wall Mounted Chassis for Remote Controls and Panels
DC-4W
Desktop or Wall Mounted Chassis for Remote Controls and Panels
SMB-1G
Surface Mount Boxes for Remote Controls and Panels
SMB-1W
Surface Mount Boxes for Remote Controls and Panels
SMB-2G
Surface Mount Boxes for Remote Controls and Panels
SMB-2W
Surface Mount Boxes for Remote Controls and Panels
SMB-3G
Surface Mount Boxes for Remote Controls and Panels
SMB-3W
Surface Mount Boxes for Decora® Remote Controls and Panels
SMB-4G
Surface Mount Boxes for Remote Controls and Panels
SMB-4W
Surface Mount Boxes for Decora® Remote Controls and Panels
Suggested Products
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/