Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Line Level Distribution Amplifier - 1x3
Model: ST-DA3
- Audio Distribution with up to 3 Outputs
- Balanced or Unbalanced Input and Outputs
- Bridge an Audio Line for Local Distribution
- Distribution with Impedance Conversion
- Distribution with Gain or Loss
Product Info
Tech Specs
Related Products
Documents
Accessories
The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known.
The ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes ground-referenced.
- Audio Distribution with up to 3 Outputs
- Balanced or Unbalanced Input and Outputs
- Bridge an Audio Line for Local Distribution
- Distribution with Impedance Conversion
- Distribution with Gain or Loss
- Inputs and Outputs RF-Protected
- 1x3 Mono or Use Two Units for Stereo
- RDL® SupplyFlex™ Power Input Configuration
- Spec Sheet available - Yes
- Number of Inputs: 1
- Number of Outputs: 3
- Inputs: 20 k ohm Balanced or Unbalanced
- Input Signal: -15 to +21 dBu (for +4 dBu output)
- Maximum Input Level: +24 dBu
- Outputs (3): 150 ohm balanced or 75 ohm unbalanced
- Output Signal:
- Balanced: +4 dBu nominal balanced;
- Unbalanced: 6 dB below balanced line level
- Maximum Output Level: +25 dBu
- Frequency Response: 10 to 100000Hz (+/- 0.05 dB)
- THD+N: 0.002 % (unity gain)
- IMD: 0.003 % (unity gain)
- Noise below +4 dBu: -98 dB
- Headroom: 20 dB
- Gain: Unity +/- 17 dB (adjustable)
- CMRR: 60 dB (50 Hz to 120 Hz)
- Power Requirement: 24 to 33 Vdc @ 70 mA
EZ-ADA4
- Stereo Audio Distribution Amplifier-1X4
FP-AVDA4
- Stereo Audio/Video Distributor-1x4, Phono Jacks
RU-ADA4D
- RU-ADA4D Audio Distribution Amplifier
RU-ADA8D
- RU-ADA8D Audio Distribution Amplifier
RU-MLD4
- Mic / Line Distribution Amplifier
RU-UDA4
- Stereo Audio Distributor - 2x4 - Phono Jacks
STS-RF1
- Shielded Chassis for STICK-ON Module
STICK-ON® SERIES Model ST-DA3 Distribution Amplifier
1380491 kb
- Data Sheet
DRA-35S
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
SMK-12
STICK-ON Mounting Plate
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
MB-3
Kit to Mount ST, TX Series Modules on FP Panel
MSR-1
Snap Rail Adapter - STICK-ON Series
SMK-12
STICK-ON Mounting Plate
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
STR-19B
Hinged 19-inch Rack Mount Panel
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Radio Design Labs
Model: ST-DA3
Request more information from a dealer near you
close
Request more information from a dealer near you