Test & Measurement Equipment : Signal Generators : RDL, Radio Design Labs - ST-RG1

Ramp Generator - 0 to 10 Vdc Output

Series:

Model: ST-RG1

VCAs may be controlled from several locations with the optional RLC2 Remote Level Control panel or RUC-4 Universal Remote.
LED level indicator driver circuitry is included in the ST-RG1 for visual indication of relative level.
Ramp Generator with 0 to 10 Volt Output
Remote Control of ST-VCA2 modules
Multiple VCA Remote Control Points

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The ST-RG1 is a digitally generated 0 to 10 volt Ramp Generator which provides the ideal interface for audio volume control from multiple points with the ST-VCA2. Any number of Up and Down buttons may be connected to the ST-RG1. Sufficient drive is provided from the ST-RG1 to control up to six ST-VCA2s.

VCAs may be controlled from several locations with the optional RLC2 Remote Level Control panel or RUC-4 Universal Remote.
LED level indicator driver circuitry is included in the ST-RG1 for visual indication of relative level.
Ramp Generator with 0 to 10 Volt Output
Remote Control of ST-VCA2 modules
Multiple VCA Remote Control Points
Pushbutton Up / Down Ramp Control
Dual LED Outputs for Position Indication
Ramp Output Capable of Driving Six VCAs
Buffered, De-Bounced Switch Inputs

Signal Generator Type - Audio
Tester Format - Other

Operating Temperature (Maximum): 131 F
Operating Temperature (Minimum): 32 F
Control Inputs: 1 to ramp up, 1 to ramp down
Input Logic: External closure pulls normally low input to +15 Vdc to activate UP or DOWN function
Indicator Outputs: 1 to drive red LED (partial to fully OFF)
1 to drive green LED (partial to fully ON)
LED Output Current: 0 to 3 mA (to drive low current, high intensity LEDs)
Ramp Output: 0 to 10 Volts nominal, (typical < 0.1 V to > 9.8 V under ST-VCA2 load)
Minimum Step: 200 mV nominal
Ramp Time: 5 seconds nominal (fully off to fully on; or fully on to fully off)
Power Requirement: 24 to 33 VDC @ 40 mA

ST-VCA3 - Voltage Controlled Amplifier

STS-RF1 - Shielded Chassis for STICK-ON Module

Datasheet for Ramp Generator - 0 to 10 Vdc Output 385740 kb - Other

Project List

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-2
Mounting Kit - RU and TX Series

MSR-1
Snap Rail Adapter - STICK-ON Series

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19A
STICK-ON Series Racking System - 12 Modules

STR-19B
Hinged 19-inch Rack Mount Panel

Suggested Products

IR Test Kit Frequency/Strength/Voltage

by Vanco International

600 Mcsc HDMI 2.0a/2.0b Analyzer

by AVPro Edge