Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Half-Cardioid Condenser Microphone
Series: Shure
Model: BETA 91A
- Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
- Precision-engineered low-profile design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter
- Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
- Two-position contour switch to maximize attack and clarity depending on application:select the flat response setting for natural sound in most applications or the "low-mid scoop" setting for a strong low frequency "punch" with plenty of higher frequency at
- Requires no external mounting or accessories for ease of use and storage
Product Info
Tech Specs
Related Products
Documents
The Beta 91A is designed for use with kick drums, as well as other traditional low-frequency applications including piano. Featuring an updated microphone capsule, integrated preamplifier, and XLR connection, Beta 91A offers a strong low-frequency response and is specifically tailored for bass frequency applications. The Beta 91A combines superior attack and punch for studio-quality sound, even at extremely high sound pressure levels (SPL).
- Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
- Precision-engineered low-profile design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter
- Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
- Two-position contour switch to maximize attack and clarity depending on application:select the flat response setting for natural sound in most applications or the "low-mid scoop" setting for a strong low frequency "punch" with plenty of higher frequency at
- Requires no external mounting or accessories for ease of use and storage
- Furnished with zipper pouch
- Microphone Type - Condenser
- Polar/Pickup Pattern - Half-cardiod
- Spec Sheet available - Yes
- Impedance: 146 Ohms
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Dynamic Range: 125.50 dB
- Impedance: 146 ohm
- Maximum SPL (Sound Pressure Level): 155 dB
- Sensitivity: -48.50 dBV
- Signal to Noise Ratio: 64.50 dB
- DC Voltage: 52 Volts
- Product Weight: 1.04 lbs
- Common Mode Rejection (20 Hz to 20 kHz): > 55 dB
- Clipping Level (20Hz-20 kHz at 1% THD):
1000 Ohm load
THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL - Self Noise (typical, equivalent SPL, A-weighted): 29.5 dB (SPL-A )
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Frequency Contour Switch: 7 dB of attenuation centered at 400 kHz
- Connector: Three-pin professional audio (XLR), male, balanced
- Power Requirements: 11-52Â Vdc phantom power, 5.6 mA
- Regulatory Compliance: CE, EMC
BETA 98H/C
- Premium Cardioid Condenser Instrument Microphone with Preamplifier
Shure BETA 91A spec sheet.pdf
823 kb
- Data Sheet
Shure BETA 91A user guide.pdf
2368 kb
- Instructions
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Shure Incorporated
Model: BETA 91A
Request more information from a dealer near you
close
Request more information from a dealer near you