Network Equipment : Wi-Fi Extenders : TRENDnet - TPE-315GI

10G PoE+ Injector

Series: Injector

Model: TPE-315GI

Converts a non-PoE port to a PoE+ port
Supplies PoE (15.4W) or PoE+ (30W)
10GBASE-T compliant
Network a PoE device up to 100m (328 ft.) over Cat6A or better cabling
Save on installation and equipment costs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

TRENDnet’s 10G PoE+ Injector, model TPE-315GI, combines electrical power with a 10GBASE-T network connection to produce a 10G PoE+ network signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE or PoE+ devices. Connect the 10G PoE+ injector to a non-PoE switch, and then run an Ethernet cable with data + power to network a PoE or PoE+ device up to 100 meters (328 ft.) over Cat6A or better cabling. Network PoE devices, such as wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more

Converts a non-PoE port to a PoE+ port
Supplies PoE (15.4W) or PoE+ (30W)
10GBASE-T compliant
Network a PoE device up to 100m (328 ft.) over Cat6A or better cabling
Save on installation and equipment costs
IEEE 802.3af and 802.3at compliant
NDAA / TAA compliant (U.S. and Canada only)

TAA Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
Certifications: CE FCC
Peak Power: 0.30 Watt
Height: 3 in
Length: 7 in
Width: 6 in
Product Weight: 0.85 lbs
Warranty (Length/Type): 3-year

EN_datasheet_TPE-315GI_(v1.0R).pdf 2673701 kb - Data Sheet

Project List

Suggested Products

Wi-Fi Network I/O Extender with 2 COM Ports

by Crestron Electronics, Inc.

Wi-Fi Network I/O Extender with 4 IR Ports

by Crestron Electronics, Inc.

Wi-Fi Network I/O Extender with 4 Digital Inputs

by Crestron Electronics, Inc.