Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
SmartPro 120V 1kVA 750W Medical-Grade Line-Interactive Tower UPS, 4 Outlets, Full Isolation, Expandable Runtime
Series: SmartPro Series
Model: SMART1200XLHG
- Ideal UPS protection for applications in medical patient-care areas where UL 60601-1 listed medical electrical equipment is required
- Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
- Provides connected equipment with continuous power during short and long duration loss of commercial power
- Expandable runtime is available with the addition of one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible)
- Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
Product Info
Tech Specs
Related Products
Documents
Tripp Lite's SMART 1200XLHG offers medical-grade UPS protection with built-in line-interactive voltage regulation, expandable battery runtime and intelligent monitoring with unattended shutdown capability. UL 60601-1 listed as medical electrical equipment. Built-in isolation transformer with Faraday shield offers full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes less than 100 microamps. Includes high quality hospital-grade plug and outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports computers, inter-networking equipment and other critical loads during commercial power failures. External battery connector allows configuration for up to several hours of runtime during power failures by adding one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible). Line interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels, saving battery reserves for use only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1 USB, 1 DB9) that work with included PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.
- Ideal UPS protection for applications in medical patient-care areas where UL 60601-1 listed medical electrical equipment is required
- Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
- Provides connected equipment with continuous power during short and long duration loss of commercial power
- Expandable runtime is available with the addition of one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible)
- Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
- Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
- Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
- Resistant to electrostatic discharge
- Supports loads up to 1000VA/750W
- 28 min. half-load runtime (500VA/375W), 10 min. full load runtime (1000VA/750W)
- 4 protected hospital-grade outlets; 6-ft. cord
- USB and DB9 communication ports
- PowerAlert unattended shutdown software and complete cabling included
- Complete surge protection, line isolation and EMI/RFI noise filtering
- 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
- Battery replacement door and back panel grounding lug
- Package includes SMART 1200XLHG Medical Grade Tower UPS System, PowerAlert Software and cabling, Warranty information, Instruction manual
- Warranty - Yes
- UL Rated - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Cord Length (in/mm): 70.87 in
- Number of Outlets: 4
- UL Rated: Yes
- AC Voltage: 115,120 Volts
- Active Power: 750 Watt
- Current Draw: 9.20 Amps
- DC Voltage: 36 Volts
- Power Factor: 0.80 %
- Depth: 9.50 in
- Height: 12.50 in
- Width: 7.50 in
- Product Weight: 45.20 lbs
- Shipping Weight: 51 lbs
- Warranty (Length/Type): 2 years
- Rack Units (Height): 2U
- Output Volt Amp Capacity (VA): 1000
- Output kVA capacity (kVA): 1
- Frequency Compatibility: 60 Hz
- Output voltage regulation (line mode): -18%, +8%
- Output voltage regulation (Battery mode): 115V (+/- 5%)
- Built-in UPS output receptacles: 4 5-15R outlet(s)
- Output receptacle details: Hospital grade output receptacles
- Output AC waveform (AC mode): Sine wave
- Output AC waveform (battery mode): PWM sine wave
- Nominal Input Voltage(s) Supported: 120V AC
- UPS input connection type: 5-15P-HG
- Input circuit breaker: 15A
- UPS Input cord length (ft.): 6
- UPS Input cord length (m): 1.8
- Recommended Electrical Service: 15A 120V
- Full load runtime (minutes): 10 min. (750w)
- Half load runtime (minutes): 28 min. (375w)
- Expandable battery runtime: Extended runtime supported via optional external battery packs
- External battery pack compatibility: BP36V15-2UÂ (limit 1);Â BP36V42-3UÂ (multi-pack compatible)
- DC system voltage (VDC): 36
- Battery recharge rate (included batteries): Less than 4.5 hours from 10% to 90%
- Replacement battery cartridge (internal UPS battery replacement): RBC53
- Battery Access: Battery access door
- Battery replacement description: Hot-swappable, user replaceable batteries
- Voltage regulation description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 143
- Overvoltage correction: Input voltages between 126 and 143 are reduced by 9%
- Undervoltage correction: Input voltages between 96 and 106 are boosted by 10%
- Severe undervoltage correction: Input voltages between 81 and 95 are boosted by 21%
- UPS AC suppression joule rating: 480
- UPS AC suppression response time: Instantaneous
- EMI / RFI AC noise suppression: Yes
- Output isolation transformer: Hospital grade load isolation transformer
- Leakage current: Equal to 100 microamps
- Installation form factors supported with included accessories: Tower
- Installation form factors supported with optional accessories: Wallmount (UPSWM - tower mounting kit)
- Primary Form Factor: Tower
- Shipping dimensions (height x width x depth ): 18.2 x 11.8 x 13.5inches
- UPS housing material: PVC
- Cooling Method: Fan
- Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity: 0 to 95%, non-condensing
- AC mode BTU / hr. (full load): 162.8
- Battery mode BTU / hr. (full load): 315.2
- Communications interface: USB; DB9 Serial
- Network monitoring port description: Supports detailed monitoring of UPS and site power conditions
- PowerAlert software: Included
- Communications Cable: USB and DB9 serial cabling included
- Transfer Time: 2-4 milliseconds
- Low voltage transfer to battery power (setpoint): 81
- High voltage transfer to battery power (setpoint): 143
- Grounding Lug: Grounding lug
- Cold Start (startup in battery mode during a power failure): Cold-start operation supported
- High availability UPS features: Hot swappable batteries
- Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI); Tested to UL60601-1 (medical grade)
- RoHS Compliant: Yes
- Cisco Compatible: Yes
Line interactive Tower UPS System
112 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Create Spaces
close
Create Spaces
623 S Americana Blvd, Boise, ID 83702
Boise, ID 83702
USA
2083850507
https://createspaces.com/
Contact in regards to this product:
Tripp Lite
Model: SMART1200XLHG
Request more information from a dealer near you
close
Request more information from a dealer near you