Power Supplies : Uninterruptable Power Supply - Battery Backups : Tripp Lite - SMART5000XFMRXL

SmartPro 208 & 120V 5kVA 3.75kW Line-Interactive Sine Wave UPS, 3U, Extended Run, Network Card Options, USB, DB9

Series: SMARTPRO®

Model: SMART5000XFMRXL

5000VA/3750 watt max. output power capacity compatible with North American 208V/60Hz input voltage
Supports full output at either 208V or 120V
3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 22.5 inches
Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
Line Interactive Automatic Voltage Regulation (AVR) corrects 208V nominal input from 167 to 260VAC back to usable 208/120V levels without consuming battery power

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

Tripp Lite 5kVA Smart RM UPS. 5000VA line-interactive UPS for server, network and telecommunications equipment. UPS with internal batteries requires 3 rack spaces installed. Accepts 208V nominal input voltage. Simultaneous 208 & 120V output. Corrects brownouts and overvoltages from 167V to 260V. Sine wave output. Maintains battery-derived AC output during blackouts and severe voltage fluctuations. Expandable runtime with optional external battery packs. 11 output receptacles. NEMA L6-30P input connection with support for user-supplied 50A or hardwire input. Network-grade AC surge and noise suppression. Network management interfaces include USB, DB9 serial and SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all network interfaces simultaneously. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated 8-bank switched PDU. 3-stage metered current monitoring and battery charge LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rack mounting accessories included; 2-9USTAND and 2POSTRMKITWM accessories available. Field-replaceable, hot-swappable internal batteries and battery packs. Attractive all-black color scheme.

5000VA/3750 watt max. output power capacity compatible with North American 208V/60Hz input voltage
Supports full output at either 208V or 120V
3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 22.5 inches
Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
Line Interactive Automatic Voltage Regulation (AVR) corrects 208V nominal input from 167 to 260VAC back to usable 208/120V levels without consuming battery power
AVR circuits boost undervoltages by 12% and reduce overvoltages by 12%
Network interfaces support simultaneous communications via USB, DB9 serial and SNMPWEBCARD slot
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, internal UPS temperature, AC line frequency, timed inverter shutoff, activate self-test and l
Built-in Emergency Power Off (EPO) interface with cable
Sine wave output in AC and battery mode
Expandable runtime with optional BP48V60RT3U external battery packs
Half/full load runtime of 27/10 minutes with internal batteries
Includes 11 output receptacles (2 L6-20, 1 L6-30 & 8 NEMA 5-15/20R)
Ships with installed L6-30P input plug, supports user supplied 50A replacement plug or hardwire input
Integrated 8 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices
3 stage metered LEDs offer current monitoring and battery charge level
Mains power and voltage regulation LEDs offer at-a-glance power status information
Front panel switches support self-test and alarm cancel functions
Included adjustable mounting rails support installation in 4 post 19 inch racks
UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required
Supports 2 post rackmount installation with optional 2POSTRMKIT accessory
Supports upright tower placement with optional 2-9USTAND accessory
Package Includes SMART 5000XFMRXL UPS System, PowerAlert Software and Cabling, Mounting hardware for 4-post rackmount installation, Instruction manual

Warranty - Yes
Rackmountable - Yes
UL Rated - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Cord Length (in/mm): 120 in
Estimated Runtime: 8.50 minutes
Estimated Runtime: 0.14 hours
Rackmountable: Yes
UL Rated: Yes
AC Voltage: 208 Volts
Current Draw: 27 Amps
DC Voltage: 48 Volts
Depth: 25 in
Height: 5.20 in
Width: 17.50 in
Product Weight: 143.30 lbs
Shipping Weight: 181.90 lbs
Warranty (Length/Type): 2 Years
Output volt amp capacity: 5000 VA
Output Watt Capacity: 3750
Output power factor: 0.8
Nominal Output Voltage(s) Supported: 120V; 208V
Frequency Compatibility: 60 Hz
Output voltage regulation (line mode): 208 & 120V (+/- 10%)
Output voltage regulation (Battery mode): +/- 5%
Built-in UPS output receptacles: 8 5-15/20R outlet(s); 2 L6-20R outlet(s); 1 L6-30R outlet(s)
Built-in controllable switched load banks: Eight switchable single-outlet 5-15/20R load banks
Output circuit breaker: 20A double pole breaker supports L6-20R outlets, 20A branch rated breaker (x2) supports 4 5-15/20R outlets each, L6-30R outlet is unbreakered
Output AC waveform (AC mode): Sine wave
Output AC waveform (battery mode): Pure Sine wave
UPS input connection type: L6-30P
Recommended Electrical Service: 30 A 208V
Half Load Runtime: 20 min. (1875w)
Battery recharge rate (included batteries): Less than 4 hours from 10% to 90%
Voltage regulation description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 167 to 260
Overvoltage correction: Input voltages between 228 and 260 are reduced by 12%
Undervoltage correction: Input voltages between 167 and 194 are boosted by 12%
UPS AC suppression joule rating: 1020
UPS AC suppression response time: Instantaneous
EMI / RFI AC noise suppression: Yes
Rack Units (Height): 3U
UPS Shipping dimensions (height x width x depth): 11.2 x 23 x 31.5 inch
UPS housing material: Steel
Cooling Method: Fan
Storage Temperature Range: -15 to +50 °C
Relative Humidity: 0 to 95%, non-condensing
AC mode BTU / hr. (full load): 671.1
Battery mode BTU / hr. (full load): 1416.7
Transfer Time: 2-4 milliseconds
Low voltage transfer to battery power (setpoint): 167
High voltage transfer to battery power (setpoint): 260
UPS Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
Product Warranty Period with Registration: 3 Years
RoHS Compliant: Yes
Cisco Compatible: Yes

BP48V242UTAA - TAA-Compliant External 48V 2U Rack/Tower Battery Pack Enclosure for select UPS Systems (BP48V242UTAA-Compliant)

BP48V27-2US - External 48V 2U Rack/Tower Battery Pack for select UPS Systems (BP48V27-2US)

BP48V60RT3UTAA - TAA-Compliant External 48V 3U Battery Pack for select Tripp Lite UPS systems (BP48V60RT3UTAA-Compliant)

WEXT1Q - 1-Year Extended Warranty - For select Tripp Lite Products

WEXT2Q - 2-Year Extended Warranty - For select Tripp Lite Products

Interactive Sine Wave UPS 121 kb - Data Sheet

Project List

2-9USTAND
2U to 9U Tower Stand Kit for select Rack-Mount UPS Systems

SNMPWEBCARD
SNMP Management Accessory Card, SmartPro or SmartOnline UPS Systems

SmartPro 208 & 120V 5kVA 3.75kW Line-Interactive Sine Wave UPS, 3U, Extended Run, Network Card Options, USB, DB9

Series: SMARTPRO®

Model: SMART5000XFMRXL

Suggested Products